Please see the Blumat Information page for detailed information on Blumats. In a nutshell, The Tropf (tropf is Austrian for drip) Blumat has become the ideal watering method for growing in greenhouses, for indoor gardening, on decks and in planter boxes, as well as for certain kinds of outdoor plants. It's the evolution of drip irrigation.
Description coming soon.
$17.52
Description 3/4" Bulkhead Fitting
$17.52
Description coming soon.
$12.00
The Grow Tent Preset Blumat Irrigation Kit is a complete, ready-to-install Blumat system designed specifically for indoor grow tents and living soil setups. These kits are built around preset Blumat sensors, which means you get the benefits of plant-driven automation without the confusing setup process. Once installed, your system will maintain stable soil moisture automatically — no timers, no hand watering schedules, and no daily guesswork. Preset Blumat sensors are designed for a fast, repeatable setup. Instead of spending time calibrating and second-guessing adjustments, you can get up and running quickly while still getting the reliable, plant-controlled performance Blumat is known for.
$71.20 - $219.20
Pots from 1-gallon seedling containers to 200-gallon living soil systems can use a Blumat irrigation kit tailored to their watering needs. Choose the sensor size, calibration type, and water-distribution method that fit each container. Designed for container irrigation from 1 to 200 gallons. Options range from a single drip point for small pots to drip rings, distribution drippers, and BluSoak layouts for larger containers. Tropf Blumat ceramic sensors automatically start and stop water flow as the root zone dries and rewets. Unlike timer-controlled irrigation, the system responds directly to plant demand, weather, and container moisture—without electricity or programming. Sensor Size ＋ 5" Sensor — Best for small pots, shallow containers, capillary mat-style setups, or situations where you specifically want shallower moisture sensing. 9" Sensor — Recommended for containers over 6" deep. The 9" sensor depth is adjustable, so it does not need to be buried all the way down. It gives more flexibility for larger containers, deeper root zones while still allowing you to place the ceramic cone at the moisture-sensing depth you want. Calibration Type ＋ Standard — Ships as-is from Blumat. You dial in the moisture level yourself. Includes 6" of 3mm tubing (5" sensor) or 2 ft (9" sensor). Preset — Pre-calibrated at our Colorado warehouse for most soil and potting mix types. Includes a locking adjustment cap, 3mm union, adjustment key, and an additional 2 ft of 3mm tubing. Distribution Method ＋ None (1–5 gal) — Sensor waters directly at the insertion point. Best for small pots. 5" Drip Ring (2–7 gal) — 4 drip points, pre-assembled. 3-Dripper Setup (5–20 gal) — 3 drippers with stakes and 3mm tubing. 10" Drip Ring (10–20 gal) — 8 drip points, pre-assembled. 5-Dripper Setup (10–30 gal) — 5 drippers with stakes and 3mm tubing. BluSoak Tape Loop (30–90 gal) — Single loop for even coverage around large containers. BluSoak Tape Double Spiral (30–90 gal) — Spiral from center outward for maximum coverage. BluSoak Tape Triple Spiral (100–200 gal) — Largest spiral layout for very big pots and beds. What's Included ＋ 1 Blumat sensor (5" or 9" based on selection) 3mm drip tubing (6" or 2 ft based on sensor size) Distribution components based on selection (drip ring, drippers, or BluSoak tape) Preset upgrade includes: locking adjustment cap, 3mm union, adjustment key, extra tubing What You'll Also Need ＋ This kit covers everything at the pot. To complete your system you’ll also need an 8mm supply line and a water source: 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits. Gravity Reservoir — our complete 5-Gallon Deluxe Bucket Kit comes pre-drilled and ready to connect, or grab our 8mm Bulkhead Fittings and use any container of your choosing. Pressurized Source (hose bib or pump) — if connecting to a hose bib or pump instead of a gravity reservoir, you’ll need a Pressure Reducer to bring the pressure down to the safe Blumat operating range of 7–15 PSI. How It Works ＋ The Blumat sensor is a ceramic cone that reads soil moisture. As the soil dries, a vacuum builds inside the cone and pulls water through the drip line. When moisture is restored, the valve closes automatically. Connect your sensor to any 8mm Blumat supply line running from a gravity reservoir or pressurized source. No programming, no timers, no electricity required. Frequently Asked Questions ＋ Which Blumat sensor should I choose? Choose a 5" sensor for shallow pots or when you want to monitor moisture nearer the surface. Choose a 9" sensor for deeper containers and larger root zones. Which distribution method fits my pot? Use a single drip point for small pots, a drip ring or distribution drippers for medium containers, and a BluSoak layout for large living soil pots. The gallon ranges listed with each option provide a practical starting point. Can this system run from gravity or pressure? Yes. Blumat irrigation for pots can run from a properly elevated gravity reservoir or a pressurized hose bib or pump fitted with a Blumat-compatible pressure reducer. What is sold separately? The main 8mm supply line and water-source components are sold separately. Build a complete irrigation system · Preset Blumat setup instructions
$9.18 - $39.96
Description coming soon.
$21.00
Automatically water multiple houseplants from one container and one water line. When at home or on vacation, your plants will thrive. This complete kit has everything you need for 3 plants and you can easily add parts for more plants later.The Inline Blumat Classics maintain ideal moisture levels for your plants automatically. Super-Flex Tubing connects the plants to your water container and the Shut-off Valve creates a stop at the end of the line. Any place you need watering,For each plant, just cut the line with scissors and push the Classic into your potting mix. You can change the amount of water supplied by raising or lowering the jar.
$78.00
High-Pressure BluSoak Raised Bed Kits pair a preset 9" Blumat sensor with ultra-low-flow, emitter-style High-Pressure BluSoak drip tape. The 6-inch emitter spacing promotes continuous lateral wicking and uniform moisture across raised beds and large containers. Designed exclusively for pressurized installations operating between 10 and 15 PSI. These kits require a regulated hose bib or pump system and will not operate correctly from gravity pressure. Formerly described as BluSoak 3.0 high-pressure kits. The removable straight-line layout makes the system easy to lift out, amend beneath, and reinstall between cycles. Pressure & Water Source Requirements ＋ Required operating pressure: 10–15 PSI Works with a regulated hose bib, municipal supply, or pump system Use a 1-bar (15 PSI) reducer or an adjustable pressure reducer set within the operating range Not compatible with gravity-fed systems The pump, hose connection, pressure reducer, and main supply line are not included. Kit Options ＋ 2×4 Bed / Large Container — Two straight runs and 10 ft of High-Pressure BluSoak 4×4 Bed — Four straight runs and 20 ft of High-Pressure BluSoak 4×8 Bed — Four straight runs and 40 ft of High-Pressure BluSoak What's Included ＋ Preset 9" Blumat sensor High-Pressure BluSoak drip tape with 6-inch emitter spacing 8mm SuperFlex header lines Required in-bed BluSoak fittings and adapters What You'll Also Need ＋ This kit covers the irrigation components inside the bed. To complete the system, you will also need: An 8mm supply line running from the water source to the Blumat sensor A pressurized water source such as a hose bib or pump A compatible pressure reducer set between 10 and 15 PSI Straight-Line Layout ＋ Lift the irrigation assembly out before amending the bed Reinstall it without rebuilding a woven layout Keep the tape runs clean, modular, and easy to service Maintain consistent pressure distribution through header-fed straight runs How It Works ＋ The preset Blumat sensor responds continuously to soil moisture and controls water flow into the tape. As the bed dries, the sensor opens. When the target moisture level is restored, it closes automatically. High-Pressure BluSoak releases water from closely spaced emitters. At 10–15 PSI, the low flow rate and 6-inch spacing create stable, predictable moisture distribution without relying on a timer. Installation Notes ＋ Cut the tape directly through an emitter, not between emitters. Position the first emitter approximately 6 inches from the fitting. Fully tighten all tape fittings; even small leaks can reduce pressure and cause uneven performance. Purge the supply line and confirm full finished-system pressure before calibrating or adjusting the sensor. Frequently Asked QuestionsWhich water source should I use? Use a hose bib or pump regulated to 10–15 PSI. Choose a Blumat-compatible 15 PSI reducer or an adjustable reducer set within that range. A 7.25 PSI reducer does not provide enough pressure. What is sold separately? The water source and main supply line are sold separately. High-pressure installations also require a compatible pressure reducer. Is this the same tape as BluSoak 3.0? Yes. BluSoak 3.0 is now High-Pressure BluSoak. The new name clarifies which water setup to use.High-Pressure BluSoak Drip Tape · Compare raised bed watering kits · Build a complete irrigation system · Preset Blumat setup instructions High-Pressure BluSoak cutting and fitting instructions. Select the image to enlarge.
$42.00 - $70.00
Effortlessly water a 3'x3' or 4'x4' bed with this Gravity Kit. Each container includes a 9-inch preset sensor and a four line Blusoak Manifold, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest. Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time. Components This Kit includes: Preset Blumat Bed-Medium (IG19151) Blumat Supply Kit Small (IG19155) Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator) (IG18352)
$135.00
Effortlessly water a 3'x3' or 4'x4' bed with this Gravity Kit. Each container includes a 9-inch preset sensor and a four line Blusoak Manifold, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest. The Grow Tent Preset Blumat Irrigation Kit is a complete, ready-to-install Blumat system designed specifically for indoor grow tents and living soil setups. These kits are built around preset Blumat sensors, which means you get the benefits of plant-driven automation without the confusing setup process. Once installed, your system will maintain stable soil moisture automatically — no timers, no hand watering schedules, and no daily guesswork. Preset Blumat sensors are designed for a fast, repeatable setup. Instead of spending time calibrating and second-guessing adjustments, you can get up and running quickly while still getting the reliable, plant-controlled performance Blumat is known for.
$166.00
The Grow Tent Preset Blumat Irrigation Kit is a complete, ready-to-install Blumat system designed specifically for indoor grow tents and living soil setups. These kits are built around preset Blumat sensors, which means you get the benefits of plant-driven automation without the confusing setup process. Once installed, your system will maintain stable soil moisture automatically — no timers, no hand watering schedules, and no daily guesswork. Preset Blumat sensors are designed for a fast, repeatable setup. Instead of spending time calibrating and second-guessing adjustments, you can get up and running quickly while still getting the reliable, plant-controlled performance Blumat is known for.
$184.00
Effortlessly water six 5-7 gallon containers with our 4x4 Gravity Kit. Each container includes six 9-inch preset sensors and 5-inch dtrip rings, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest. Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time for small systems. Components This Kit includes: 6 Preset Blumat 5-7 Gallon (IG19146) 1 Blumat Supply Kit Small (IG19155) 1 Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (IG16806)
$216.00
