8mm Fittings
Blumat 8mm Tees - bulk
Description These tees are great for branching a side line of Blumats off in a different direction. They're also really good for the middle of a loop in a hydroponic and/or grow room. If you use one of these and a valve, it makes it easy to let air and sediment out before it can cause problems.
$1.20
Blumat Tee - 8mm x 3mm - Individual
Description These are the T pieces that come included with the Tropf-Blumat sensors. You can use these to replace a broken or lost one. You can also use it to run a direct line with the distributor drippers Note: Each carrot we sell (both regular and maxi) come with this Tee already attached, no need to purchase these seperately if you already purchased carrots. These are great to have as replacements or if using multiple rooms and only one set of carrots.
$1.20
Blumat 8mm Elbows - Individual
Description If you have lots of room and can easily make large, round bends; you won't need elbows. If you're in a smaller space though, they will save you lots of room and prevent kinking. See the pictures here for examples of using them to go up and down in raised beds.
$1.20
End Piece for 8mm Supply Line - 8mm x 3mm Elbow Adapter
Description End piece for 8mm line-barb for sensor. This lets you end a supply line with a Blumat sensor - just take the tee that comes with the Blumat off and replace with this fitting.
$1.25
Blumat Hose Unions - Individual
Description These Blumat 8mm Hose Unions, also known as 8mm couplers) are ideal for re-connecting your 8mm tubing back together. This fitting essentially acts as a band-aid to connect two pieces of 8mm tubing back together. Useful for fixing leaks or sections of your supply line that got kinked or opened up somehow. Simply cut into the tubing, and connect each side of the 8mm tubing back together, no need to purchase an entire extra line of tubing.
$1.25
8mm Y Splitter
Description Use the 8mm Y to split your 8mm line and be able to expand and customize your Blumat system more than ever before. The 8mm Tee is good for splitting the 8mm tubing at 90 degree angles but this Y is ideal if you want to create a loop, if you want to split into 2 lines for two plants, or for any type of similar directional lines that run near parallel. Customize your system, any way you want to!
$3.12
Blumat 3mm to 8mm Reducer
Description These are great for connecting a plant when it's far away from the supply line, too far to make long 3mm lines - just use a tee and 8mm, adapt down to the 3mm with this.
$1.85
Press-In Plug, 8mm
DescriptionFits into the end of our 8mm Black, White, or Super-Flex tubing to create and end plug.
$1.30
Blumat Reducer Tee - 8mm x 3mm - 3 Pack
Description These are the T pieces that come included with the Tropf-Blumat sensors. You can use these to replace a broken or lost one. You can also use it to run a direct line with the distributor drippers (IG14609). 8mm x 3mm x 8mm Tee - pack of 3
$4.20
8mm Cross for SuperFlex 8mm tubing
Description8mm Cross that works best our Super-Flex silicon tubing.
$2.91
Blumat Elbows - 3 Pack
Description These really help in greenhouses and raised beds. They help you neatly go around corners in your Tropf Blumat irrigation system. The right-angled elbow eliminates bends in the tubing that can limit the flow in your irrigation system. The black plastic is robust and barbed at both ends to hold the tube securely in place. Contains three 8mm (5/16") elbows.
$4.00
Tropf Blumat Tee and End Piece Pack (2 Sets)
Description These let you split off branch feeder tubes and terminate them instead of making wide loops with your feeder tube. Outside for big plants you may not need to use these but for smaller areas and greenhouses, they really help. Contains 2 tees and 2 end-pieces.
$5.05
