Tubing and Supply Line

Different sizes and types of supply line for varying garden sizes and growing conditions. Select a category below.

17 products


  • 8mm Red Super-Flex Tubing

    8mm Red Super-Flex Tubing

    3 reviews

    Going fast!

    Description This 8mm Super-Flex Tubing is the highest quality tubing we could find for Blumat watering systems. It is extruded from the highest quality silicone we could source. The material has a hardness rating of 60 Shore A and is heat-stabilized to withstand up to 500 degrees Fahrenheit, or 230 Celsius. SUPERIOR FLEXIBILITY - Elbows etc. not required due to malleability- turn hard corners easy! HIGH QUALITY - Durable silicone tubing endures in harsh indoor/outdoor garden environments! EASY CONNECTIONS - Simply push over an 8mm barb - no strength/tricky mechanisms required! BLUMAT-READY - Integrate blumat systems and super-flex with nothing more than a pair of scissors! ALMOST KINK-PROOF - Incredible material is practically impossible to kink - Re-use again and again! This tubing cannot be stained, is re-usable, and is basically the Rambo of water-supply tubing! It can endure highs and lows of temperatures as well as varying pressures, can endure high-UV environs (we have tested it for years in high-altitude mountains of Colorado), and you'd really need to make a conscious effort to kink or otherwise crease this tubing. This tubing will readily integrate to any Tropf Blumat or 8mm Blumat Fitting, including the 8mm Through-Hull Bulkhead Tank connector or Pressure Reducer. That means you really just need a bulkhead or two, some of this tubing, and a Blumat to automatically water your plants!  This super-flex tubing is one of the simplest ways to start a Blumat watering system.This can be used as supply tubing to connect reservoirs, supply Blumat watering stakes, or otherwise connect Blumat systems. Don't count on sourcing rare 8mm tubing from your local hardware store!

    Going fast!

    $1.13 - $96.00

  • 3mm Drip Tube for Blumat Systems

    3mm Drip Tube for Blumat Systems

    Description BLUMAT READY - This 3mm drip tubing readily integrates with blumats, and attaches to included tees! BLUSOAK/DISTRIBUTION DRIPPERS - This tubing will integrate drippers and/or tape to blumat systems! HIGH QUALITY - Made of silicone and extremely durable, this pliable tubing is easy to work with! RARE 3MM SIZING - Order from us -- your local hardware store won't have this unique size! DISCRETE - Gray-brown color blends in easily with soil and planters--no need for unsightly tubing! This 3mm tubing is ideal for blumat watering systems and other unique irrigation applications. This is the sizing that is included with each blumat. This tubing runs through the caps/tops of each tropf blumat as well as the classic models.This 3mm tubing size is also the tubing size designed for integrating distribution drippers to blumat systems. If you want to string drippers around your container, you will want some of this tubing! This 3mm silicone tubing is also ideal for integrating BluSoak drip tape to blumat watering systems as well. This is really the choice tubing for automatic drip irrigation kit(s) and any blumat watering system.The silicone material is extremely high quality, and will endure in high-UV environments (like outdoors), under intense artificial lighting, or even underground! It can be handled like a piece of wet spaghetti, eliminating the need for additional fittings like "90-degree elbows" or other pieces required for acute angles or steep turns. This is the same 3mm tubing included with each blumat - so if you're looking for more of that rare material, look no further!This is the tubing that connects the Blumat sensors to the 8mm main line. The sensors all come with short lengths of this but if you want to install some further away, this is the way to do it. It's also the tubing used to connect the Blumat distributors to the Blumat sensors. This is useful for planter boxes, long rows or big plants that need more water from all sides.

    $0.86 - $254.10

  • Blumat 8mm Water Supply Tube Black (30M, 98.43ft)-1

    Blumat 8mm Water Supply Tube

    3 reviews

    Description This is the tubing used to connect Blumat components to your water source. It's an 8 mm European style. You can also use US-style 5/16" drip tube but it's hard to find, not very flexible, and the fittings are harder to put in. Buying these larger rolls saves about 15%.

    $14.00 - $230.00

  • Blank Poly Tube 1/2" x 100'

    Blank Poly Tube 1/2" x 100'

    7 in stock

    Description Blank Poly Tube 1/2" x 100' Your conventional 1/2" drip tube, goes into regular 1/2" barbed fittings for drip tube.

    7 in stock

    $21.00

  • Red 1/4" Super-Flex Tubing for Blumat Watering Systems - By the Foot

    Red 1/4" Super-Flex Tubing for Blumat Watering Systems - By the Foot

    Description Super flexible and almost impossible to kink(For standard irrigation systems, for Blumat systems refer to 8mm Superflex)This tubing is more expensive than typical 1/4", but is extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, etc.It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reuseable, and we can cut this to the length you need.We also have this in 100' rolls.

    $1.13

  • Red 1/4" Super-Flex Tubing - 50' Roll

    Red 1/4" Super-Flex Tubing - 50' Roll

    Description (For standard irrigation systems, for Blumat systems refer to 8mm Superflex) Super flexible and almost impossible to kink This tubing is more expensive but extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, etc.  It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reusable, and we can cut this to the length you need. We also have available by the foot.*Please note that this is not the standard Blumat supply line size

    $56.70

  • Red 1/4" Super-Flex Tubing - 100' Roll

    Red 1/4" Super-Flex Tubing - 100' Roll

    Description Super flexible and almost impossible to kink(For standard irrigation systems, for Blumat systems refer to 8mm Superflex) This Silicone Rubber Tubing is more expensive but extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, or... It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reusable, and we can cut this to the length you need.

    $101.85

  • Blumat System - Extension Kit-1

    Blumat System - Extension Kit

    Going fast!

    Description This kit is an add-on to other kits. An extension kit allows you to easily expand and customize your system to perfectly-fit your watering needs. Add on to your starter kit to create a more customizable and efficient system, great for when expanding a system! This Kit Includes: 10 Meters of Blumat Black Supply Line (32') 3 Blumat 8 mm Tee's (Hose Branch) 1 Blumat 8 mm Elbow 1 Shut-off Valve (fits into 8 mm supply line or can be tee'd off in a closed loop system)

    Going fast!

    $29.88

  • 1/4" Goof Plug-1

    1/4" Goof Plug

    Description Use the larger end to plug unwanted holes in poly tubing. The small end can be used to cap off end of 1/4” drip line.

    $10.00

  • Sale -50% Blank Poly Tube 1/2" x 1000'-1

    Blank Poly Tube 1/2" x 1000'

    Description Blank Poly Tube 1/2" x 1000' Your conventional 1/2" drip tube, goes into regular 1/2" barbed fittings for drip tube.

    $210.00$105.00

  • Blank Poly Tube 1/2" x 50'-1

    Blank Poly Tube 1/2" x 50'

    Description Blank Poly Tube 1/2" x 50'Your conventional 1/2" drip tube, goes into regular 1/2" barbed fittings for drip tube.

    $15.75

  • Blumat 1/4" 4-Way Cross

    Blumat 1/4" 4-Way Cross

    Description Make cross connections in 1/4" line. You can use these to send distribution drippers in different directions rather than in a straight line. You can also use them as a more economical distribution method instead of using the drippers. Just cut equal lenghts of 1/4" tubing and spread them around. This requires more maintenance because roots can grow into the tubing but it does save some dollars. This would be our "Economy" design suggestion. The "Mid-Range" version would use the drippers and the "Deluxe" suggestion would be to use more Blumat carrots. This is more expensive but gives you redundancy rather than having all the eggs in one basket.

    $0.95

Login

Forgot your password?

Don't have an account yet?
Create account