Description
This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve professional growth.
Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 4 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s).
Assembly Instructions
Guide to Blumat Pump Kits
High Flow Pump Kit Assembly Instructions
Components
This Kit Includes:
1 - Shurflo High Flow 115v AC 3GPM Pump (WP16122)
1 - 1/2" x 1/4" Threaded PVC Bushing (IG15733)
1 - Pressure Tank, 5.5 gallon (4-Gallon Capacity) (WP16325)
1 - Blumat Standard Pressure Reducer 1 Bar (15psi) (IG14606)
1 - Blumat Filter - White Bowl, 8mm
1 - Bulkhead Fitting 3/4" Male Hose x 1/2" FPT (IG154940)
1 - 3/4" MPT x 3/4" MHT or 1/2" FPT Fitting - Adapt to Garden Hose or Pressure Reducer (IG15620)
1 - Teflon Tape
4 - 1/2" MPT x 1/2" Insert Adapter (IG15716)
7 - Hose Clamp 1/2"-1 1/4" (IG16105)
2 - SHURflo 1/2" NPT Elbow Hose Fitting x Wingnut 1/2" NPT (WP15891)
1 - 1/2" Tee (Insert-FPT-Insert) (IG16195)
1 - 6" x 1/2" Sch 80 Nipples (IG19008)
1 - 6' 18g Pigtail/Plug (WP16665)
6 ft - 5/8" Braided Clear Flex Tube - Food Grade Water Supply Tube (IG18177)
1 - Close Nipples 1/2" x 1/2" (IG15858)
1 - 1/2" PVC Coupling FXF Thread (IG16580)
3 - Blue Wire Nuts
Description
The Shurflo pump model 2088-594-154 which is the higher flow model pump made by Shurflo.
Warranty coverage provided by ShurFlo, best used with our 4-gal Pressure Tank
This is the pump that comes standard in our High Flow Pump kits (Model: IG16134).
This kit is easier to assemble and has a smaller floor footprint then our earlier pump kit models. It can easily supply water pressure to a large number of Blumat Tropfs in both commercial and home operations.
When To Use A Pump Kit
This kit is a great solution for larger home grows and commercial facilities looking to supply their plants from a reservoir without having to get a reservoir up high for a gravity system or attach directly to a pressurized water line.
What This Kit Does Not Include
Supply Tubing for your Blumat system.
A reservoir
A drill bit to install our bulkhead into the reservoir. (A step up bit is preferable)
Components
What This Kit Includes
Then pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer (2.5—14 psi).
Description
This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve a professional grow. Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 14 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s). Assembly Instructions Guide to Blumat Pump Kits High Flow Pump Kit Assembly Instructions
Description
This Shurflo pump Model 9325-043-101 is the perfect answer for your water pumping needs! This can be used as a solar water pump and is ideal for wells, making it the an ideal solution for off-grid living, homesteading, gardening, and more. This trusted shurflo water pump is rated to 1.9 gallons per minute at 24V. The pump diaphragm is constructed of santoprene. This is a highly durable material that behaves like rubber, but performs at a higher level. well hand pump(s) won't even compare to this solar submersible pump! This model can even be used as an industrial water pump. The cable connector is impervious to water leakage and condensation! The valves are made of EPDM (ethylene propylene diene monomer) rubber for high durability and consistent performance. This pump is capable of outputting water at 100PSi, which is enough to gain a significant amount of lift (do not use this pump with wells over 100' deep). The pump runs at 100W. It can also be used with 12V solar panels, and just runs at a lower output than using 24V. This is totally capable of being run on normal electrical sources, or for use as a solar well pump. Most customers purchase this pump for use on off-grid properties, and report that they run several decades with proper care and use. You won't regret replacing your hand well pump with this one! Pump Specifications: Pump from as deep as 230 feet and as many as 700 gallons per day! 117 GHP at 20' head, 82 GPH at 230' head Needs only 60-155 watts of solar power! Lasts for years and years 12V/24V 100PSI 1/2" Barb with 1/2" NPT-M Hose Kit 1 Year Warranty
Description
SHURFLO® 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spraying and transfer applications that require flows of up to 4.0 GPM [14.4 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
This particular pump model is great because it can be hooked up to a solar power source as well as many other power sources.
See pump details below:
Model
2088-474-144
Description
3.0 GPM open flow, Santoprene® valves, Santoprene® diaphragm, 45 PSI Demand Switch, 1/2" MSPT ports (1/2" - 14 National American Straight Pipe Thread, requires SHURflo swivel type fittings), Poly Housing
Voltage
24 VDC
PSI
10
20
30
40
BAR
0.7
1.4
2.1
2.8
GPM
2.80
2.25
1.75
1.25
L/min
10.6
8.5
6.6
4.7
Amps
2.41
2.63
2.73
2.71
