Build Your Indoor/Greenhouse Watering System
Choose what you’re watering, how you’ll supply the water, and the lines to connect it.
All options · Gravity · Pressurized
Jump to a section
Prefer a complete kit? Explore gravity-powered grow tent kits →
Kits for pots
Choose a drip ring for individual containers, or a flexible BluSoak loop for larger pots. Each kit includes a preset 9-inch Blumat sensor. Drip rings work with gravity or pressure.
5-inch Drip Ring Kit · 2–7 Gallon Pots
Water around the plant with a compact drip ring. Includes the 5-inch ring, preset 9-inch sensor, and connecting drip tubing. One kit per pot.
10-inch Drip Ring Kit · 10–20 Gallon Pots
A wider ring distributes water around larger containers. Includes the 10-inch ring, preset 9-inch sensor, and connecting drip tubing. One kit per pot.
10-foot BluSoak Loop Kit · 30–90 Gallon Pots
10 feet of BluSoak arranged in a continuous loop. Shape the loop to suit your container. Includes a preset 9-inch sensor. Choose white gravity tape or black high-pressure tape.
Kits for beds
Each kit includes a preset 9-inch Blumat sensor, BluSoak tape, and the fittings for straight tape runs inside your bed. Choose white tape for gravity or black tape for pressure. Bed and soil are not included.
2 × 4 Bed Kit
Two straight runs · 10 ft of BluSoak
Preset 9-inch sensor and in-bed fittings included.
4 × 4 Bed Kit
Four straight runs · 20 ft of BluSoak
Preset 9-inch sensor and in-bed fittings included.
4 × 8 Bed Kit
Four straight runs · 40 ft of BluSoak
Preset 9-inch sensor and in-bed fittings included.
AquaMAT capillary watering kits
Water containers from below using a capillary mat. Choose the mat size and either a preset 5-inch Blumat or a Surface Blumat sensor. The same kits work with gravity or pressure.
2 × 4 AquaMAT Kit
Bottom-up watering for containers.
Choose a preset 5-inch or Surface Blumat sensor below.
3 × 3 AquaMAT Kit
Bottom-up watering for containers.
Choose a preset 5-inch or Surface Blumat sensor below.
4 × 4 AquaMAT Kit
Bottom-up watering for containers.
Choose a preset 5-inch or Surface Blumat sensor below.
4 × 8 AquaMAT Kit
Bottom-up watering for containers.
Choose a preset 5-inch or Surface Blumat sensor below.
Choose how to supply the water
Choose one source setup. Use a raised reservoir for gravity, a pump for a reservoir at ground level, or a pressure reducer for a faucet connection.
Gravity · use a raised reservoir
Raised-Reservoir Bulkhead
Gravity • Connect your raised reservoir to our ½-inch Poly Trunk Line Kit. ¾-inch male hose × ½-inch female pipe thread.
$7.00
View product details
Bulkhead Fittings · 2-Pack
Gravity • Two bulkhead fittings provide the outgoing and returning connections for your looped supply line. Use your own suitably raised reservoir.
$11.82
View product details
Ready-made 5-gallon reservoir
Gravity • Bucket with two bulkhead fittings and a water-level indicator. Raise the reservoir to supply your gravity system.
Pressure · use a pump or faucet
Original 1-bar Blumat Reducer
Pressure • Reduce incoming faucet pressure to 15 PSI for a compatible Blumat setup.
Mini Pump Kit
Pressure • Supply water from your own reservoir without raising it. The kit includes its operating hardware and pressure reducer.
Whole System Pressure Reducer
Pressure • Adjustable reducer for connecting a pressurized water supply to your Blumat system.
Connect your system
Choose tubing for the actual route from your water source to your kits. Gravity supply lines run out and return in a loop. Pressure layouts can branch and dead-end. Routing changes how much tubing you need.
8mm SuperFlex Supply Line Kit
Small, Medium, or Large. Flexible tubing, tees, and shutoffs let you build the route your grow needs. Measure the whole route—including the return leg for gravity—rather than choosing by floor area alone.
½-inch Poly Trunk Line Kit
For larger systems or a durable main line you can mount along a wall. Reduce to 8mm at each zone. Choose 50 or 100 feet and 1–6 zone connections. A trunk line is not required for every setup.
Monitor your soil moisture
See what’s happening below the surface and check the effect of your watering adjustments.
Blumat Digital Moisture Meter
Check moisture tension at root depth with a digital reading. Battery included.
$89.00
View product details
12-inch LT Irrometer
Monitor deeper beds and large containers with a continuous analog reading. No batteries needed.
$115.76
View product detailsCheck your setup before checkout
You need watering kits for your pots, beds, or mats; one compatible water-source setup; and enough supply tubing for the route. Add a trunk line only where your layout needs one.
What Growers Are Saying
