Access Denied
Access Denied

The site owner may have set restrictions that prevent you from accessing the site. Please contact the site owner for access.

Protected by 
MIDA Logo  MIDA

Official Blumat Distributors for the United States | FREE Shipping Over $100

Backyard 1500 x 120 px (1).jpg__PID:908b3c38-c1d3-4854-a4dd-ea1232069ad5
Backyard 420x140 (2).jpg__PID:3c38c1d3-2854-44dd-aa12-32069ad58b07

Whole System Adjustable Pressure Reducer for Blumat systems

Whole System Adjustable Pressure Reducer for Blumat systems

Product form

SKU: IG18898
Barcode: 723592448691

$140.40

    Description

    Full control over your Blumat system pressure. Adjustable from 2–14 PSI with a built-in gauge so you always know exactly what your system is running — the most important number to know in any Blumat setup.

    Key Features
    • Built-in 0–30 PSI pressure gauge for real-time monitoring
    • High flow rate of over 5 gallons per minute — can replace six or more standard Blumat pressure reducers
    • Adjustable from 2–14 PSI to match any distribution method (drippers, drip rings, BluSoak)
    • Powerful enough for the largest systems, precise enough for single-zone setups
    Connections & Adapters

    The reducer body has a ½" male pipe thread (MPT) inlet and a ¾" female pipe thread (FPT) outlet. Included adapters make it easy to install:

    • Input — ¾" PVC swivel adapter for standard garden hoses or hose bibs
    • Output — ¾" to ½" Perma-Loc fitting for Trunk Line Kits
    • Output — ¾" to 8mm adapter for Supply Line Kits with SuperFlex tubing
    • Also includes — ¾" FPT tee and 1/4" to ¾" MBT bushing
    Installation Instructions
    1. Tape all male fittings with the provided tape, wrapping 5–6 times clockwise.
    2. Assemble parts as pictured in the instruction diagram.
    3. Connect to a valve on a pump kit or to a hose bib using the provided ¾" swivel adapter.
    4. Using the provided fittings, connect to your Blumat system supply line.
    5. Open the incoming water to check current system pressure. Recommended ranges:
      • Drip rings — 12–15 PSI
      • BluSoak — 7–10 PSI
    6. To adjust pressure: turn off incoming water, release system pressure by opening a valve on the Blumat supply line until the gauge reads 0, then turn the black adjustment collar (tighten for more pressure, loosen for less).
    7. Close the Blumat supply line valve and open incoming water to re-pressurize. Check the gauge. If not in range, repeat steps 6–7 until correct.

    Recently viewed products

    ★★★★★
    ★★★★★
    ★★★★★
    ★★★★★

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Description

    Full control over your Blumat system pressure. Adjustable from 2–14 PSI with a built-in gauge so you always know exactly what your system is running — the most important number to know in any Blumat setup.

    Key Features
    • Built-in 0–30 PSI pressure gauge for real-time monitoring
    • High flow rate of over 5 gallons per minute — can replace six or more standard Blumat pressure reducers
    • Adjustable from 2–14 PSI to match any distribution method (drippers, drip rings, BluSoak)
    • Powerful enough for the largest systems, precise enough for single-zone setups
    Connections & Adapters

    The reducer body has a ½" male pipe thread (MPT) inlet and a ¾" female pipe thread (FPT) outlet. Included adapters make it easy to install:

    • Input — ¾" PVC swivel adapter for standard garden hoses or hose bibs
    • Output — ¾" to ½" Perma-Loc fitting for Trunk Line Kits
    • Output — ¾" to 8mm adapter for Supply Line Kits with SuperFlex tubing
    • Also includes — ¾" FPT tee and 1/4" to ¾" MBT bushing
    Installation Instructions
    1. Tape all male fittings with the provided tape, wrapping 5–6 times clockwise.
    2. Assemble parts as pictured in the instruction diagram.
    3. Connect to a valve on a pump kit or to a hose bib using the provided ¾" swivel adapter.
    4. Using the provided fittings, connect to your Blumat system supply line.
    5. Open the incoming water to check current system pressure. Recommended ranges:
      • Drip rings — 12–15 PSI
      • BluSoak — 7–10 PSI
    6. To adjust pressure: turn off incoming water, release system pressure by opening a valve on the Blumat supply line until the gauge reads 0, then turn the black adjustment collar (tighten for more pressure, loosen for less).
    7. Close the Blumat supply line valve and open incoming water to re-pressurize. Check the gauge. If not in range, repeat steps 6–7 until correct.