Small systems work great on gravity; but, when you expand, you may need a pressuring pump system. These also help if you lose your pressure when mixing nutrients and additives in a reservoir. The pump pressurizes a pressure tank and turns off. The tank then silently supplies the water with the pump not running. These also can work to transfer water from a distant tank to one closer or to automatically fill a small reservoir with a float valve.
Pumps and Filters
Blumat High-Flow Pump System - Not Mounted
Description This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve professional growth. Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 4 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s). This Kit Includes: 1 - Shurflo High Flow 115v AC 3GPM Pump 1 - 1/2" x 1/4" Threaded PVC Bushing 1 - Pressure Tank, 5.5 gallon (4-Gallon capacity) 1 - Blumat Standard Pressure Reducer 1bar (15psi) 1 - Blumat Filter - White Bowl, 8mm 1 - Bulkhead Fitting 3/4" male hose x 1/2" FPT 1 - 3/4" MPT x 3/4" MHT or 1/2" FPT Fitting - Adapt to Garden Hose or Pressure Reducer 1 - Teflon tape 4 - 1/2" MPT x 1/2" Insert Adapter 7 - IG16105 Hose Clamp 1/2"-1 1/4" 2 - SHURflo 1/2" NPT Elbow Hose Fitting x Wingnut 1/2" NPT 1 - 1/2" Tee (insert-FPT-insert) 1 - 6" x 1/2" Sch 80 Nipples 1 - 6' 18g Pigtail/plug 6 ft - 5/8" Braided Clear Flex Tube - Food Grade Water Supply Tube 1 - Close Nipples 1/2" x 1/2" 1 - 1/2" PVC coupling fxf thread 3 - Blue Wire Nuts Assembly Instructions Guide to Blumat Pump Kits High Flow Pump Kit Assembly Instructions
$603.80
Blumat Filter - Clear Bowl, 8mm
Description A relatively inexpensive but still high quality and easy-to-use filter. Because of the clear base, you can quickly see if it's getting dirty and you can clean it out without having to unhook your lines. Includes adapters going to 8 mm Blumat line so to install, just cut the line and push the tubing on to the adapters! If your water isn't clean or you'd like to use thick nutrients in a reservoir, this filter will keep your Blumats safe. The screen has just the right mesh - not too big that could let clogging particles through or too small that would mean unnecessary cleaning. Clear bases make it easier to tell if they need to be cleaned but best only in dark rooms. White bases better to prevent algae build-up. For the same price, we can also ship this with fittings for 1/2" drip, 3/8" drip, 1/2" & 3/4" slip PVC. For a little extra, we can provide a fitting for 3/4 hose thread or any combination of the above. Blumat Filter/Strainer Specs: Length 3 In., Height 4 3/16 In., 177 Microns, 80 Mesh, 316 Stainless Steel Screen, Color Clear or White, Screen Area 6.75 Sq.-In., Material of Construction Polypropylene, 20 Max. Flow GPM, Max. Pressure 100 At 70 Deg F PSI
$36.23
Blumat Small Inlet Filter Strainer - 8mm
Description New Blumat Mini-Strainer for Filtering In-Line This is a small strainer that goes directly in 8mm Blumat supply line! Includes a clear bowl to make it easier to know if sediment fills up the container. Easy twist-on/twist-off clear filter bowls allows you to easily clean out the filter and re-use. Also includes quick connect fittings that gives you the ability to easily take out of line and clean. Also available for 1/4" spaghetti tube and with quick connect/stops that give you the option to stop water flow after removing. SHURflo 255-213 Twist-on Strainer Specifications: Inlet: 1/2" MPT or 1/4" FPT Outlet: 1/2" MPT or 1/4" FPT 50 mesh stainless steel screen Transparent filter bowl Keeps debris out of pump or water supply line
$23.00
Shurflo High Flow 115v AC 3GPM Pump
Description The Shurflo pump model 2088-594-154 which is the higher flow model pump made by Shurflo. Warranty coverage provided by ShurFlo, best used with our 4-gal Pressure Tank This is the pump that comes standard in our High Flow Pump kits (Model: IG16134).
$225.75
Blumat Filter - White Bowl, 8mm
Description A relatively inexpensive but still high quality and easy-to-use filter. Includes adapters going to 8 mm Blumat line so to install, just cut the line and push the tubing on to the adapters! If your water isn't clean or you'd like to use thick nutrients in a reservoir, this filter will keep your Blumats safe. The screen has just the right mesh - not too big that could let clogging particles through or too small that would mean unnecessary cleaning. Clear bases make it easier to tell if they need to be cleaned but best only in dark rooms. White bases better to prevent algae build-up. For the same price, we can also ship this with fittings for 1/2" drip, 3/8" drip, 1/2" & 3/4" slip PVC. For a little extra, we can provide a fitting for 3/4 hose thread or any combination of the above.
$34.13
Hose Thread Filter 155 Mesh w/ Ball Valve
Description 3/4" male hose thread x 3/4" male hose thread. This filter will remove physical particulates and debris prior to entering your irrigation line. Great for drip emitters.
$17.34
3/4" Hose Thread 75 Mesh
Description 3/4" Hose Thread 75 Mesh Size: 3/4" Mesh: 75 Mesh
$19.94
SHURflo Revolution Pressure Pump 8005
Description This is the pump we use in our Blumat Pressure systems. The 8005-233-236 ShurFlo Pressure pump is ideal for a Blumat irrigation system due to being rated for continuous use and its built in pressure switch. If you'd like to do your own version of this system, we highly recommend the pump model - we've tested quite a few and this one is the most dependable, quite, and has ideal pressure and flow specs. It's more expensive than other Shurflo models but with both a built in pressure switch and internal bypass, we haven't seen anything like it yet. This is a new and redesigned fresh water pump created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all systems. Constructed for high flow demand, low noise and no rapid cycling. SHURflo's quality reputation has been built on the reliability and dependability. The Revolution fresh water automatic demand pump is super quiet, thermally protected and can run dry without damage. Dimensions: 4.90 inch x 8.10 inch x 4.30 inch; Flow Rate 1.4 GPM. 115 VAC.
$177.45
Blumat Small Inlet Filter Strainer - 8mm w/ Quick Connect On/Off Valve
Description New Blumat Mini-Strainer for Filtering In-Line This is a small strainer that goes directly in 8mm Blumat supply line! Also has a quick connect 8mm on/off valve to allow you to manually turn off the water when you need to clean the filter. Includes a clear bowl to make it easier to know if sediment fills up the container. Easy twist-on/twist-off clear filter bowls allows you to easily clean out the filter and re-use. Also includes quick connect fittings that gives you the ability to easily take out of line and clean. Also available for 1/4" spaghetti tube and with quick connect/stops that give you the option to stop water flow after removing. SHURflo 255-213 Twist-on Strainer Specifications: Inlet: 1/2" MPT or 1/4" FPT Outlet: 1/2" MPT or 1/4" FPT 50 mesh stainless steel screen Transparent filter bowl Keeps debris out of pump or water supply line
$37.00
Highflow Pump Kit w/ 14 Gallon Tank
Description This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve a professional grow. Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 14 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s). Assembly Instructions Guide to Blumat Pump Kits High Flow Pump Kit Assembly Instructions
$661.49
Horizontal Pump Kit
Introducing Our New and Improved Pump Kit This kit is easier to assemble and has a smaller floor footprint then our earlier pump kit models. It can easily supply water pressure to a large number of Blumat Tropfs in both commercial and home operations. When To Use A Pump Kit This kit is a great solution for larger home grows and commercial facilities looking to supply their plants from a reservoir without having to get a reservoir up high for a gravity system or attach directly to a pressurized water line. What This Kit Includes The pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer. What This Kit Does Not Include -Supply Tubing for your Blumat system. -A reservoir. -A drill bit to install our bulkhead into the reservoir. ( A step up bit is preferable)
$619.49
3/4" MPT Y Screen Filter
Description 3/4" Y Style Drip Irrigation Screen Filter with Male pipe Threads 120 mesh micron-precise filtration,low cost with excellent performance 2 preset holes for connecting pressure gauge.
$11.09