Flow Restrictors

13 products


  • Flow Restrictor, 25' to 100' BluSoak, Assembled 8mm to 8mm, Green-1

    Flow Restrictor, 25' to 100' BluSoak, Assembled 8mm to 8mm, Green

    Going fast!

    Description Use this to restrict the flow of your system to 0.5GPH, great for BluSoak and EasySoak Systems alike. If you use 100' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 50' of soaker hose, it will give two pint's per foot, per 24 hours. etc. Flow Restrictor, 25' to 100' BluSoak, Assembled 8mm to 8mm, Green

    Going fast!

    $15.75

  • Going fast! Flow Controller Circle Ring - Blue (up to 100' of BluSoak)-1

    Flow Controller Circle Ring - Blue (up to 100' of BluSoak)

    5 in stock

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Blue' flow restrictors (IG16330) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions.This 'Blue' version limits flow for our mega drip tape to 1 gallon/hour and should be installed when using lengths of BluSoak between 50 and 100 feet.

    5 in stock

    $5.25

  • Flow Controller Circle Ring - Green (up to 50' of BluSoak)-1

    Flow Controller Circle Ring - Green (up to 50' of BluSoak)

    Going fast!

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Green' flow restrictors (IG16329) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions.This 'Green' version limits flow for our mega drip tape to 0.50 gallons/hour and should be installed when using lengths of BluSoak between 25 and 50 feet.

    Going fast!

    $5.80

  • Flow Restrictor, 100' to 400' BluSoak, Assembled 8mm to 8mm, Red-1

    Flow Restrictor, 100' to 400' BluSoak, Assembled 8mm to 8mm, Red

    Description Use this to restrict the flow of your system to 0.5GPH, great for BluSoak and EasySoak Systems alike. If you use 400' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 200' of soaker hose, it will give two pint's per foot, per 24 hours, etc. Flow Restrictor, 100' to 200' BluSoak, Assembled 8mm to 8mm, Red

    $15.75

  • Going fast! Flow Restrictor, 50' to 200' BluSoak, Assembled 8mm to 8mm, Blue-1

    Flow Restrictor, 50' to 200' BluSoak, Assembled 8mm to 8mm, Blue

    5 in stock

    Description Use this to restrict the flow of your system to 1GPH, great for BluSoak and EasySoak Systems alike. If you use 200' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 100' of soaker hose, it will give two pint's per foot, per 24 hours, etc. Flow Restrictor, 50' to 100' BluSoak, Assembled 8mm to 8mm, Blue

    5 in stock

    $15.75

  • Flow Controller Circle Ring - Red (up to 200' of BluSoak)-1

    Flow Controller Circle Ring - Red (up to 200' of BluSoak)

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Red' flow restrictors (IG16331) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Red' version limits flow for our mega drip tape to 2 gallons/hour and should be installed when using lengths of BluSoak between 100 to 200 feet.

    $5.25

  • Flow Controller Circle Ring - Black (up to 750' of BluSoak)-1

    Flow Controller Circle Ring - Black (up to 750' of BluSoak)

    11 in stock

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Black' flow restrictors (IG16374) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Black' version limits flow for our mega drip tape to 9.0 gallons/hour and should be installed when using lengths of BluSoak between 200 to 750 feet.

    11 in stock

    $5.25

  • Flow Controller 8mm to 8mm, Up to 200'-750' of BluSoak, Silver-1

    Flow Controller 8mm to 8mm, Up to 200'-750' of BluSoak, Silver

    11 in stock

    Description This is an assembled flow restrictor unit that can fit into a a 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.15GPM per min, and should be used when using lengths of BluSoak between 200 to 750 feet.

    11 in stock

    $16.87

  • Flow Controller 8mm to 8mm, Up to 1500'-2500' of BluSoak, Gold-1

    Flow Controller 8mm to 8mm, Up to 1500'-2500' of BluSoak, Gold

    11 in stock

    Description This is an assembled flow restrictor unit that can fit into an 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.5GPM per min, and should be used when using lengths of BluSoak between 1500 to 2500 feet.

    11 in stock

    $16.87

  • Flow Controller 8mm to 8mm, Up to 750'-1500' of BluSoak, Black-1

    Flow Controller 8mm to 8mm, Up to 750'-1500' of BluSoak, Black

    11 in stock

    Description This is an assembled flow restrictor unit that can fit into an 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.35 GPM per min, and should be used when using lengths of BluSoak between 750 to 1500 feet.

    11 in stock

    $16.87

  • Flow Controller Circle Ring - Gold (For up to 2500' of BluSoak)-1

    Flow Controller Circle Ring - Gold (For up to 2500' of BluSoak)

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Gold' flow restrictors (IG16376) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Gold' version limits flow for our mega drip tape to 30 gallons/hour and should be installed when using lengths of BluSoak between 1500 to 2500 feet.

    $5.25

  • Flow Controller Circle Ring - Silver (up to 1500' of BluSoak)-1

    Flow Controller Circle Ring - Silver (up to 1500' of BluSoak)

    Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Silver' flow restrictors (IG16375) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Silver' version limits flow for our mega drip tape to 21 gallons/hour and should be installed when using lengths of BluSoak between 750 to 1500 feet.

    $5.25

Login

Forgot your password?

Don't have an account yet?
Create account