Water Supply
Blumat Standard Pressure Reducer 1bar (15psi)
Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$56.00
Blumat Pressure Reducer 0.5 Bar (7.25 psi)
Description True reducer - Not a mere flow controller, this brings water pressure down to 7.25 psi (0.5 bar)! Easy to install - Screws onto standard hose thread (3/4" input), and outputs to 8mm tubing! Enduring - Made from ABS plastic and designed with few points of failure, this is built to last! Blumat ready - Designed specifically for Blumat water systems and 8mm tubing, no tools necessary! Austria-engineered - This is high-quality component and is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from a normal house water connections. The Blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. Beware imposters! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates do not necessarily correlate to reduced pressure. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87 psi) down to 7.25i (0.5 bar) output. This is ideally suited and low enough for Blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4") hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with Tropf Blumats. This adaptation makes setting up a Blumat system from a hose or pressurized line an absolute breeze, and you can install blumats in seconds. Blumat systems need low pressure, much less than comes from a normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to a Blumat 8mm supply tube. Maximum input pressure is 87 psi.
$54.88
Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator
Description 5 Gallon Reservoir with water level indicator The main trouble people have with gravity Blumat systems comes from forgetting to refill the reservoir and letting the carrots dry out. With this simple water level indicator installed, you can see with a quick glance how soon you'll need to refill. If you already have a 5-gallon bucket system, you can just add on the water level kit.
$51.35
Whole System Blumat Adjustable Pressure Reducer
Product Description: This Adjustable Pressure Reducer gives you full control over your Blumat system pressure—ideal for consistent performance and the flexibility to fine-tune your setup. It includes a 0–30 PSI pressure gauge, so you always know exactly what your system is running. This is one of the most important numbers to know in a Blumat setup, essential for troubleshooting and dialing in optimal performance. With a high flow rate of over 5 gallons per minute, this reducer can replace six or more standard Blumat pressure reducers. It’s powerful enough for the largest systems, yet adjustable and precise enough to use with small, single-zone setups as well. The pressure can be set anywhere from 2–14 PSI, allowing you to match system pressure to your specific needs. Different distribution methods (drippers, drip rings, BluSoak) and sensor counts may benefit from different pressure settings, and this reducer gives you the control to optimize performance. Pressure is adjusted by turning the black collar: Left (counterclockwise) = less pressure Right (clockwise) = more pressure Connections & Adapters:The reducer body has a ½" male pipe thread (MPT) inlet and a ¾" female pipe thread (FPT) outlet. Included adapters make it easy to install: Input: Adapts to ¾" female hose thread (FHT) for standard garden hoses or hose bibs Output: ½" Perma-Loc fitting (for Trunk Line Kits) 8mm barb adapter (for Supply Line Kits with Superflex tubing)
$130.00
Blumat Water Reservoir - 5-Gallon Bucket w/ Lid & Bulkhead Fittings
Description Blumat-ready - This 5 gallon water tank comes ready with bulkheads/spigots for 8mm Blumat tubing! High quality - These buckets are made of HDPE food-grade plastic, and are assembled in the USA! Black/opaque - Designed to keep light out, these water reservoir tank(s) discourage algae growth! Ideal horticulture application - Will work for hydroponic bucket(s) or other gardening uses! Bucket with spigot(s) - Pre-installed, no tools required to get this reservoir working for your plants! Bulkheads are installed with nipples facing inward for shipping only. The bulkheads/spigots should be flipped around so that the nipples face outward for garden, horticultural, and hydroponic applications. These will work as reservoirs for Blumat watering systems, can work in hydroponic bucket system(s), can replace hydroponic reservoir(s), and are essentially kits for water barrels with spigots! You certainly don't need to be DIY-friendly to use these buckets, as we do the work requiring elbow grease and tools to get the bulkheads installed. These will deliver water wherever you take your tubing! The bulkheads perfectly integrate to 8mm tubing. We would highly recommend our ultra-high quality and durable silicone super-flex tubing. This can be installed onto this bucket - no tools required! It just slips over the nipples/barbs on the bulkheads that are pre-installed in the container. This 8mm tubing is the ideal size for Blumats, and will slip right over the barbs on the 8mm x 3mm x 8mm Tees (included with each Tropf Blumat). This bucket is really like hitting the "easy button" for Blumat systems, hydroponic watering systems, backyard gardening applications, or just about any other application that you require a 5-gallon reservoir for. This is really like a water barrel spigot kit that has already been configured and assembled for you! 5 Gallon Reservoir with two thru-hulls and lid. The two thru-hull fittings are installed backwards for shipment. When you receive your reservoir simply unscrew and flip the fittings. Grow plants anywhere! Just attach your Blumat 8mm line, fill with water, and almost instantly your plants are taken care of. This includes two installed Blumat adapters and a black lid. They have two connectors to make it easy to set up a "Blumat Loop" system. With these the water goes from 2 directions effectively giving you twice the capacity. It also equalizes the pressure and is a kind of "insurance policy" - if your line gets kinked, something clogs it up, or someone accidentally puts something heavy on it, all the plants will still get water. These are made from recyclable (#2) HDPE plastic called "the only safe plastic for drinking water" so you don't need to worry about anything bad going to your plants. The black color prevents algae and other nasties from growing in your water and also makes the water going to the roots hotter - a little known secret for superior plant growth.
$39.00
Blumat Pressure Reducer - 2 Pack
Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$102.90
Blumat Pressure Reducer - 4 Pack
Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$189.00
Gravity System Timer
Description PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - This is an ideal timer for BluSoak and EasySoak Drip Tape systems! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries! Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems. Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s). Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes. This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output. This will work ideally with BluSoak and EasySoak Drip Tape watering systems.
$41.83
Blumat 15psi Pressure Reducer w/ Fittings for 1/4" Tubing to 8mm
DescriptionThis is a 15 Psi Blumat Pressure Reducer that has all of the fittings and adapters to allow you to fit this into 1/4" supply tube with 8mm on the output.Great for being able to get optimal pressure for your Blumat System, but can now be implemented into your existing 1/4" drip system so that you can get the optimal pressure from your own supply line, then lead into the 8mm tubing from that main line.
$53.00
Multi-Use Float Valve Kit
Description Easily keep your irrigation reservoir topped off and ready for use. Just drill a 3/4" hole and install this float valve assembly. It attaches to almost any supply line and automatically keeps your reservoir full. For small systems, this is a simple way of controlling your pressure without needing a pressure regulator. You can control the pressure by just changing the reservoir height or by adjusting the float valve. The included fittings give you a choice of connecting to your water supply line with a 1/2" MPT, a 3/4" FHT, or an 8 mm barb. The float valve system will cut off the flow of water to the tank once the water level inside has reached a certain level and then automatically replenishes the water in the 5 gallon bucket; as the plants are irrigated. This method is cost saving as it does not require complicated and pricey components such as pressure reducers and flow restrictors. These systems let you hook up to any water supply; city water, rain barrel, pressurized reservoir system, without needing a pressure reducer, flow restrictor or even Blumats. Instructions Step 1: Bore a ¾ inch hole into the reservoir *Take note to not make it too close to the ridge of the bucket. Step 2: Place in the threaded side on the inside of the bucket. Apply the rubber piece first and then the plastic piece on the outside of the bucket and then screw it down - right against the plastic. Before it's fastened make sure it is the right way up! Step 3: Once you have it tightened, the float valve is installed. Components This Kit includes: 1 PVC 3/4" FHT x 1/2" FPT Swivel Adapter (IG15639) 1 Garden Hose Adapter - 3/4" Male Hose Thread (MHT) to 8mm Barbed Insert (IG16584) 1 Side-mounted Float Valve (IG18361) 1 (WP16223)
$27.30
Water Level Indicator - For 55 Gallon Reservoir (3')
Description By far, the main trouble people have with gravity Blumat systems comes from forgetting to refill the reservoir and letting the carrots dry out. With this simple water level indicator installed, you can see with a quick glance how soon you'll need to refill. If you already have a 50 or 55-gallon drum, you can just add on the water level kit. Components This product includes: 3' 8mm Clear Flex Tube (IG18177) 1 Blumat 8mm Bulkhead (IG15691) 1 Blumat 8mm Tee (IG15581) 1 8mm Union (IG15638)
$12.77
5-Gallon Reservoir w/ lid - no attachment parts
Description This is only the 5 gallon plastic reservoir and lid for Blumat Systems. This does not come with attached parts. See kits for Blumat Gravity systems to use with reservoirs.
$32.45
Quick Connect Fittings Only - 1/4" to 8mm
Description This is an ideal system to change up your existing drip irrigation system, and convert it to a Blumat automated drip irrigation system. Only water your plants when they want to be watered! Add a quick connect fitting for a cheap and inexpensive way to disconnect/reconnect your existing irrigation system. These are the fittings that attach to the clear middle valve, middle valve is not included, but they still attach to each other easily without leaking. Comes with a 1/4" male and female quick connect. Adapt a 1/4" micro line going to a Blumat carrot to 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side for either 3 mm, 1/4, or 8 mm.
$1.80
Blumat Economy Gravity Kit w/ 5-Gallon Reservoir - Automatic Irrigation System for Up to 12 Plants
Description This kit includes the Blumat Medium Box Kit which are designed to water areas up to 3.5 square meters, or 12 potted plants. Blumat systems can adjust to any plant type or desired moisture level. This specific kit comes with 5" carrots, which are better for smaller potted plants (10 gallons at most). If you have large plants (10+ gallon pots), we recommend using 9" carrots, or Maxis, to get water deep into the soil. The reservoir comes with one bulkhead fitting. *If you are looking for a closed loop system please take a look at our medium deluxe kit. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. It is easily installed with a pair of scissors and connects directly to your reservoir. This kit includes twelve, 5" carrots and all the parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. An optional Pressure Reducer attached to garden hose or faucet can provide enough water for up to 500 Blumat Carrots (Search 'pressure reducer'). The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat system are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses,Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 12 Blumat Carrots (5") (IG17188) 7 Meters (23 feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Elbow Splitter (IG15595) 1 Hose Coupler (IG15638) 1 Hose End-Piece (IG15986) 1 Rain Barrel/Gravity Tank Connectors and Installation Instructions (IG15691) 1 5 Gallon Reservoir (IG15600) 1 Bulkhead Fitting (IG15494)
$145.83
Blumat Pressure Reducer 15 psi - 3/4" MHT output
DescriptionThe standard Blumat pressure reducers work great for most systems. But for larger systems that need a higher flow rate, this becomes a better choice. This also works better when there's a long distance between the pressure reducer and your plants.A TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4"" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 15 psi (1 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference."3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 15 psi maxA TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 15 psi (1 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference.3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 15 psi max
$52.77
Blumat Pressure Reducer 7.5psi 3/4" MHT output
DescriptionLike our standard Blumat Pressure Reducer but with 3/4"" hose thread output!The standard Blumat pressure reducers work great for most systems. But for larger systems that need a higher flow rate, this becomes a better choice. This also works better when there's a long distance between the pressure reducer and your plants.A TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4"" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 7.5 psi (.5 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference.3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 7.5 psi max
$54.57
Gravity System Timer w/ Adapters
Description PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - Fittings for 3/4", 1/2", and 8mm included! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries! Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems.Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s). Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes.This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. Components The following fittings are included: IG15639 3/4" FHT x 1/2" FPT Swivel (IG15639) 3/4" Garden Hose Quick-Connect IG15716 1/2" MPT x 1/2" Barbed Insert (IG16263) IG15540 1/2" MPT x 8mm Barbed Insert (AG15807) This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output.This will work ideally with BluSoak and EasySoak Drip Tape watering systems.
$50.40
Pressure Reducer Screen
DescriptionReplacement screen for the input side of a Blumat brand 15psi pressure reducer.
$2.93
Pressure Reducer, 1.3 bar (19 psi)
Description This a pressure reducer used for if you need a higher pressure due to having a longer distance going from your hose bib to your plants, or if your water supply is going up so you need a little extra pressure to bring it up vertically. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include a pressure reducer but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. For BluSoak Systems, use a our 0.5bar Pressure Reducer (7psi) as our BluSoak doesn't like pressure over 10psi and can even split. Or use one of these and a flow restrictor alternatively.
$54.88
Pressure Reducer Valve Nut
DescriptionFits the Blumat Brand 8mm Shut-Off Valve as well.
$1.16
5-Gallon Auto-Fill Bucket
Keep your water supply stable and never worry about not having enough. This 5-gallon reservoir includes a new and more reliable float valve as well as two installed bulk head fittings with valves and easy-attach 8mm connectors for SuperFlex tubing. Because the water stays at basically the same level, the pressure and flow rates also stay stable.Use this system for home grows, backyard gardens, houseplants, rainwater collections, and more applications only limited by our imaginations.
$62.00
$5.86
Adjustable Dosatron Blumat Pressure Pump System
DescriptionWant to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.This kit uses the Dosatron D8RE2. This is fertilizer injector has a variable uptake range from 0.2%-2%. While more expensive than a standard model it allows for versatility and adaptability in your nutrient program.
$1,736.62
Dosatron Blumat Pressure Pump System
Description Want to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.
$1,023.35
