Distribution Drippers and Stakes
Blumat Distribution Drippers - bulk
Description Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. In a pressure system, by adjusting the black screw, it's possible to do more than 5 but with a gravity system, usually better to stay with 2-3. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each plant after that. One customer reported doing this successfully with 25 distribution drippers running off just one Blumat sensor.
$1.84
Blumat Distribution Drippers - End piece - Individual
Description Use these to end a Blumat distribution line. The regular distribution drippers have barbs on both sides so you need a way to end them without water dripping out too fast. You can do that with an end cap (IG15509) or with one of these. They are less expensive than the standard drippers and much easier to take on and off than the end caps. The end caps often need pliers to remove but they just pull on and off.
$1.57
Universal Stakes - Hold Down for All Tubing
Description These universal stakes solve the issue of having to find the perfect hold down stakes to fit your tubing. Make your lawn and irrigation system's more beautiful by having your tubing be well organized, held in place, and more appealing. These stakes come in any quantity selected, and are ideal for 3mm, 8mm, 1/8', 1/4', and most distribution lines. Purchase by bulk, by the "each"
$0.20
Blumat Support Stakes - Individual
DescriptionIndividual Blumat brand dripper stakes. Each stake easily and securely holds a distribution dripper.
$1.08
Support Stakes for Tropf Blumat Supply Tube and Drippers (set of 10)
Description If you're growing outside in a windy area or for any reason want to make sure your drippers don't move, these stakes will help. And good for making the tubing stay where you want it when you're making big curves - they fit both the distribution drippers and the 8 mm tubing. They're also really good if you're using Blumats in a very low pressure, gravity system. With these you can raise the drippers off the ground and help keep them from clogging.
$11.88
Cap for distribution drippers, or any of the 3mm barbs - 10 Pack
Description This is a 10 pack of caps for capping off distribution drippers or 3mm barbs.
$4.21
Blumat Distributor Drippers (Ten) + 2m of Drip Tube
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two barbs let you connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor. Components Set Includes: 10 Distribution Drippers (8 Regular + 2 End Drippers) (IG15557,IG15558) 2 Meters (6.5 ft) 3mm Drip Tube (IG16021V)
$22.68
Distribution Dripper w/ End Cap
Description Use this to end a 3mm line of distribution drippers. The specialized black cap allows you to end a line of Distribution Drippers without the need of an end piece. If you want to further expand in the future, simply take out the black cap and add on the 3mm drip tube.
$2.16
Blumat Distibution Drippers (Ten) + 2m of Drip tube - 2 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. Two barbs let you connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$43.32
Blumat Distribution Drippers - 50 Units & 10 caps
Description Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. So with this set you can set up 10 mini systems like that. The caps go on the ends of the last distribution dripper to stop the water flow. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each put after that.
$59.00
Blumat Distributor Drippers (Ten) + 2m of Drip Tube - 4 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This comes with 4 packs. Each pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$77.46
What Growers Are Saying
