On/off valves, shutoff valves, and foot valves used with Blumat irrigation supply lines and water-source connections.
Valves & Shutoffs
PVC 3/4" Ball Valve Threaded
Description A ball valve fitting ideal for threaded 3/4" piping. Turn on/off water partially or fully using a ball valve.
$3.33
BLUMAT 8mm SHUT-OFF VALVE - 2 Pack
Description BLUMAT-READY - These valves are ready to be installed in-line in 8mm tubing in seconds! EASY CONTROL - Turn on/off water supply at the turn of a valve to your whole blumat system! HIGH QUALITY/ENDURING - Made simply & w/ care by Blumats you trust, you can expect these to last! PURGE - These work perfectly at the end of 8mm tubing to purge air and/or debris from the line! AUSTRIAN-MADE - Leave it to the Austrians to design and engineer such a foolproof device! These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! These can be used to turn on/off water supply to your entire garden, or just branches of your garden (or even individual plants, plant rows, etc.--your imagination is the limit!). PLOT TWIST: These blumat fittings can also be used as purge valves. A purge valve is used to remove air, particulate matter, or other debris from a water supply line. This can be accomplished in two different ways. One is simply by concluding an 8mm tubing or line with one of these valves. The valve will remain closed 99% of the time, but should be opened if air/debris is suspected in the tubing. The air and/or debris will flow out of the tubing when the valve is opened. The second way to install a purge valve in a blumat watering system is by cutting in the middle of a "loop" design, installing a 3-way 8mm Tee fitting, and installing one of these valves on the open-end of the tee. Simply open the valve to "purge" or clear your lines.
$12.90
BLUMAT 8mm SHUT-OFF VALVE - 5 Pack
Description BLUMAT-READY - These valves are ready to be installed in-line in 8mm tubing in seconds! EASY CONTROL - Turn on/off water supply at the turn of a valve to your whole blumat system! HIGH QUALITY/ENDURING - Made simply & w/ care by Blumats you trust, you can expect these to last! PURGE - These work perfectly at the end of 8mm tubing to purge air and/or debris from the line! AUSTRIAN-MADE - Leave it to the Austrians to design and engineer such a foolproof device! These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! These can be used to turn on/off water supply to your entire garden, or just branches of your garden (or even individual plants, plant rows, etc.--your imagination is the limit!). PLOT TWIST: These blumat fittings can also be used as purge valves. A purge valve is used to remove air, particulate matter, or other debris from a water supply line. This can be accomplished in two different ways. One is simply by concluding an 8mm tubing or line with one of these valves. The valve will remain closed 99% of the time, but should be opened if air/debris is suspected in the tubing. The air and/or debris will flow out of the tubing when the valve is opened. The second way to install a purge valve in a blumat watering system is by cutting in the middle of a "loop" design, installing a 3-way 8mm Tee fitting, and installing one of these valves on the open-end of the tee. Simply open the valve to "purge" or clear your lines.
$24.00
Perma-Loc 1/2" x 8mm Barb w/ Valve
Perma-Loc fittting that adapts 1/2" tubing directly to 8mm tubing, with an integrated on/off valve.Center of fitting swivels.
$7.73
Quick Connect Shut-Off Valve (Valve Only) -- for Blumat Systems
Description Color may vary. Use a quick-connect to turn the water from your supply line either on or off. This is the middle fitting (the actual valve piece) only, purchase separate fittings to attach to this valve piece and customize it how you want. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$2.94
Foot Valve, 3/4"
Description Foot valves go into a reservoir or water tank and keep the input line full of water. They let the water come in but not out. This prevents the need to prime the pump or for the pump to work hard self-priming. Blumats don't like air in the lines and this prevents that. Without it, the water goes back into the reservoir each time the pump turns off and air goes in. If you install the bulkhead fitting on the side of the reservoir though and the pump lower than the water level, you won't need this. 3/4" female pipe thread.
$25.90
Foot Valve Connecting System
Description If connecting a Blumat pump system to a reservoir through the side or bottom is inconvenient or not possible, this option makes it easy to mount the pump above the reservoir without losing the prime. The foot valve stops the water from going back down into the reservoir and air getting into the line each time the pump turns off. This includes 6' of special flex-tube, a foot valve, clamps and fittings that will connect into the filter or pump.
$50.97
3/4" MPT x 3/4" FPT Valve
Description Threaded Male-Famale Valve, Dn3/4"*3/4"
$1.67
What Growers Are Saying
