Shop gravity-powered grow tent irrigation kits assembled by Sustainable Village. Choose a layout for individual pots, a raised bed or an AquaMAT capillary mat, then select with or without a reservoir on the product page.
Preset Blumat sensors control water delivery in response to moisture. An elevated reservoir supplies water without a pump or timer.
Need help choosing? Compare grow tent layouts and read the gravity setup guide.
A gravity-fed BluSoak loop distributes water around one large container while a preset Blumat sensor responds to moisture in the soil. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: One 30–90-gallon container. Water delivery: Gravity-fed BluSoak loop. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. A good fit for a single large living-soil container where a small drip ring would cover only part of the growing area. What's Included＋ Preset Blumat sensor and gravity BluSoak loop for one 30–90-gallon container Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The BluSoak loop distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$89.00 - $95.20
Give two large pots their own automatic watering. Preset Blumat sensors control flow to 10-inch drip rings, distributing water around each container. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: Two 10–20-gallon containers. Water delivery: Two 10-inch drip rings. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. Choose this layout for two large containers rather than a shared raised bed. What's Included＋ Two preset Blumat sensors Two 10-inch drip rings Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The watering assemblies distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$87.20 - $139.00
Water four large containers with preset Blumat sensors and 10-inch drip rings. An elevated reservoir supplies water; the sensors respond as the soil dries. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: Four 10–20-gallon containers. Water delivery: Four 10-inch drip rings. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. A layout for four separate large pots in a grow tent or indoor growing area. What's Included＋ Four preset Blumat sensors Four 10-inch drip rings Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The watering assemblies distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$123.20 - $184.00
Build a automatic watering system for six small pots. Preset Blumat sensors control water delivery through compact 5-inch drip rings. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: Six 2–7-gallon containers. Water delivery: Six 5-inch drip rings. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. Choose this layout when six individual small containers need watering from a shared elevated reservoir. What's Included＋ Six preset Blumat sensors Six 5-inch drip rings Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The watering assemblies distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$148.00 - $216.00
Supply nine small containers from one gravity-fed system. Preset Blumat sensors respond to soil moisture rather than following a fixed timer schedule. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: Nine 2–7-gallon containers. Water delivery: Preset Blumat pot watering. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. Use the nine-pot layout for separate containers. Choose a bed kit if the plants share one continuous soil bed. What's Included＋ Preset Blumat watering assemblies for nine 2–7-gallon pots Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The watering assemblies distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$194.40 - $274.00
Water a 3 × 3- or 4 × 4-foot soil bed with a preset Blumat sensor and four-line BluSoak manifold. The elevated reservoir supplies water without a powered pump. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: One bed up to 4 × 4 feet. Water delivery: 9-inch preset sensor and four-line BluSoak manifold. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. The manifold spreads water through the shared bed while the sensor controls flow in response to soil moisture. What's Included＋ One 9-inch preset Blumat sensor Four-line BluSoak manifold for a bed up to 4 × 4 feet Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The BluSoak manifold distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$108.00 - $166.00
Water compatible pots from below with a 2 × 4-foot AquaMAT layout. Gravity supplies water and preset Blumat control regulates the mat's water supply. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: A 2 × 4-foot capillary-mat layout. Water delivery: Bottom-up capillary watering. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. A useful option for compatible small pots, seedlings and propagation. Pots and growing media must be able to wick moisture from the mat. What's Included＋ 2 × 4-foot AquaMAT capillary mat Preset Blumat control for the mat’s water supply Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ Water spreads through the AquaMAT. Containers that sit against the mat draw moisture through their bases into the growing media. Preset Blumat control regulates the mat’s water supply. Use containers that can wick water from below. An air gap between the pot and mat can interrupt water uptake. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Install the mat on a clean, level surface. Place compatible containers against it so they can wick water from below. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$143.20 - $211.00
Create a larger bottom-watering area with the 4 × 4-foot AquaMAT kit. Compatible containers take up moisture through contact with the capillary mat. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: A 4 × 4-foot capillary-mat layout. Water delivery: Bottom-up capillary watering. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. Choose this layout for multiple compatible pots on a shared mat rather than individual drip rings or direct bed irrigation. What's Included＋ 4 × 4-foot AquaMAT capillary mat Preset Blumat control for the mat’s water supply Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ Water spreads through the AquaMAT. Containers that sit against the mat draw moisture through their bases into the growing media. Preset Blumat control regulates the mat’s water supply. Use containers that can wick water from below. An air gap between the pot and mat can interrupt water uptake. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Install the mat on a clean, level surface. Place compatible containers against it so they can wick water from below. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$172.80 - $247.00
Water compatible small pots from below with a 3 × 3-foot AquaMAT layout. An elevated reservoir supplies water, and preset Blumat control regulates the mat’s water supply. Choose with or without a reservoir. Both options include the reservoir connection fittings. The photo illustrates a square AquaMAT gravity layout. This kit supplies a 3 × 3-foot mat. Kit Details＋ Fits: A 3 × 3-foot capillary-mat layout. Water delivery: Bottom-up capillary watering. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. Choose the 3 × 3-foot layout for a shared bottom-watering area. Pots and growing media must wick moisture from the mat through their bases. What's Included＋ 3 × 3-foot AquaMAT capillary mat Preset Blumat control for the mat’s water supply Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ Water spreads through the AquaMAT. Containers that sit against the mat draw moisture through their bases into the growing media. Preset Blumat control regulates the mat’s water supply. Use containers that can wick water from below. An air gap between the pot and mat can interrupt water uptake. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Install the mat on a clean, level surface. Place compatible containers against it so they can wick water from below. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$213.26 - $223.46
Water a bed up to 2 × 4 feet with preset Blumat control and gravity-fed BluSoak. An elevated reservoir supplies water without a pump or timer. Choose with or without a reservoir. Both options include the reservoir connection fittings. Kit Details＋ Fits: One bed up to 2 × 4 feet. Water delivery: 9-inch preset sensor and gravity BluSoak. Water source: elevated reservoir. Watering control: preset Blumat sensors, prepared by Sustainable Village. BluSoak spreads water through the shared bed while the sensor controls flow as the soil dries. What's Included＋ One 9-inch preset Blumat sensor Gravity BluSoak distribution for a bed up to 2 × 4 feet Supply tubing and connection fittings Reservoir fittings for the water-source connection reservoir when you select “With reservoir” Reservoir Options＋ With reservoir: includes the kit’s reservoir. Without reservoir: use your own suitable reservoir. The kit still includes the reservoir connection fittings. The reservoir is the item left out. Your own reservoir needs two ½-inch holes for the supplied connections. How It Works＋ The elevated reservoir supplies water pressure. As the soil dries, the Blumat sensor opens the water flow. As moisture returns, it closes the flow. The BluSoak distribution distributes water through the growing area. The system waters according to soil moisture, so there is no timer schedule to program. Setup Notes＋ Place the bottom of the reservoir at least 3 feet 6 inches above the top of the soil. Measure from the reservoir’s bottom so it retains head height as the water level falls. Support the reservoir securely and refill it as needed. Follow the supplied preset-sensor instructions and use the gravity reference setting. Start with evenly moist growing media and make good contact between the ceramic sensor tip and the soil. Check water delivery and soil moisture after installation. Test well before leaving. Frequently Asked Questions＋ Do I need a pump, timer or electricity? No. These gravity kits use an elevated reservoir and Blumat control. You still need to refill the reservoir and check the system. Does “preset” mean I can skip setup? No. Sustainable Village presets the sensors to simplify the starting adjustment. Follow the instructions for your water source, install the sensors correctly, and check how the system waters. How long will the reservoir last? That depends on reservoir capacity and plant demand. Measure water use in your own setup before relying on it while away. Can I use a pressurized water source? These options are gravity kits. Contact Sustainable Village to confirm the pressure control and connection parts needed for a hose bib or pump. Compare grow tent kits and read the gravity setup guide · Shop all Grow Tent Kits
$79.20 - $103.20
