Products

Description A pre-set Blumat sensor matched with parts for 30 to 70 gallon container. Because pre-set, you can just push the sensor into your potting mix, connect the parts, attach to a supply line with less than 15 psi, and start automatic watering. Components This Kit includes: 1 Pre-set Blumat 9" (IG19080) 1 3mm Blusoak Tee (IG18838) 10ft BluSoak Drip Tape (IG18206) 4 BluSoak Stakes (IG16320)

Read more less

Precision-Calibrated Tropf Blumat Tops – Optimize Your System InstantlyGive your Tropf Blumat system a quick and easy upgrade with these pre-set replacement tops. Instead of manually resetting or replacing your entire sensor, simply reuse your existing ceramic cones and swap in these calibrated tops. Perfect for the start of a new growing season, a fresh round, or anytime you want to ensure consistent and accurate watering. Whether you're upgrading, or just maintaining your system, these preset tops provide a fast, effective way to restore peak performance.✔ Pre-calibrated for ideal moisture settings✔ Saves time – no need to manually reset each sensor✔ Compatible with both 5" and 9" Tropf Blumat sensors✔ Reliable results with higher yields

Read more less

Preset Tropf Blumat– Simplified Moisture Control with Hand-Calibrated PrecisionAvailable in: 5-inch | 9-inch | Watering Head Only Take the guesswork out of dialing in your Blumat system with the new Preset Tropf Blumat Sensors. These upgraded sensors offer fast, reliable setup with no soil calibration required. Whether your soil is too wet or too dry at the start, the preset sensors will automatically bring it to the proper moisture level—delaying watering if it's already moist, or starting immediately if it's dry. Each sensor is hand-marked in our Colorado warehouse with two color-coded reference points: Gold – for low-pressure systems like gravity setups Silver – for high-pressure systems like hose bibs or pump kitsFor medium-pressure systems, simply adjust between the two marks. Still Fully Adjustable: Use the included adjustment key through the top access port to fine-tune your setting anytime. Once set, the sensor provides consistent, plant-driven irrigation tailored to your system's pressure—without the trial and error of older models. 3 Sensor Options: 5-inch Preset Blumat – Ideal for small containers under 5 gallons, shallow-rooted plants, or capillary mat systems. 9-inch Preset Blumat – Great for larger pots, beds, and applications where you're targeting root-zone moisture. Adjustable from surface level up to 9 inches deep. Watering Head Only – Already using Blumat sensors? Swap your existing head for this preset version. Includes a union for easy connection without replacing tubing. Each Preset Blumat Includes: Hand-marked adjustment dial with gold and silver reference points Protective cap to prevent unwanted adjustments Adjustment key 3mm union for easy install and repositioning Why Preset? No soil calibration required—just plug, set, and grow Automatically corrects for too-wet or too-dry conditions Faster setup and fewer mistakes, especially for first-time users Fully adjustable for dialing in your moisture preferences Upgrade to Preset Blumat Sensors and make your irrigation setup easier, faster, and more precise. Your browser does not support the video tag. Click here to read/download instructions.

Read more less

DescriptionFits into the end of our 8mm Black, White, or Super-Flex tubing to create and end plug.

Read more less

Steep ground but even watering!Most inexpensive irrigation kits require flat ground and a pressure reducer. This special dripline compensates for elevation and pressure changes and normally saves you the cost of a pressure reducer. This includes 100' of Apex Pressure Compensating drip line (12" Spacing 0.55GPH), a flushable end, and a 3/4" swivel hose thread beginning. You can cut into smaller sections, get more beginnings or endings; add a coupling (IG16744) and get another roll (IG18755) for longer lines.

Read more less

Pressure Compensation Dripper, Take Apart, 1/4" Color: Yellow2L/h0.8-3.2bar

Read more less

Pressure Compensation Dripper - Take Apart, 1/4", Color: Blue 8L/h   0.8-3.2bar

Read more less

Part of the EasyDrip System, 100 pack at a discounted price. This is a pressure compensating dripper, meaning it can work on slightly higher pressure applications. Great for using on individual pots. Fits into conventional 1/4" drip tube. Great for low pressure systems! Black color

Read more less

This meter is useful for fine tuning low pressure systems. Although hard to find, a gauge with this small range makes it easy to troubleshoot and correct problems with BluSoak and other systems that require less than 5psi. With a higher psi meter, small changes would be almost impossible to detect.

Read more less

Description coming soon.

Read more less

Replacement screen for the input side of a Blumat brand 15psi pressure reducer.

Read more less

Fits the Blumat Brand 8mm Shut-Off Valve as well.

Read more less

This a pressure reducer used for if you need a higher pressure due to having a longer distance going from your hose bib to your plants, or if your water supply is going up so you need a little extra pressure to bring it up vertically. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include a pressure reducer but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. For BluSoak Systems, use a our 0.5bar Pressure Reducer (7psi) as our BluSoak doesn't like pressure over 10psi and can even split. Or use one of these and a flow restrictor alternatively.

Read more less

This is the typical flow restrictor mis-named pressure reducer. They do reduce pressure but only if the flow range is at least 2 GPM. They work well in our EasyDrip and EasySoak systems but not in normal Blumat or BluSoak set-ups. They need at least 20 psi on the input side but not more than  120 psi.

Read more less

With a big pressure tank like this one, you can easily use a Dosatron with a small to medium Blumat system without worrying about having enough flow for the Dosatron to work. Guide to Pressure Accumulator Tanks?

Read more less

Designed to connect a pressure accumulator tank with a 1/4" threaded valve to a 1/2" water line. This is especially useful when using our Shur-flo pressure switch operated pumps.

Read more less

Do you need to switch to a bigger Pressure tank? Well luckily we made it easy to do exactly that! Introducing the Pressure Tank Adapter with Fittings and Hose for Upgrading your smaller accumulator tank to a large pressure tank! This particular product includes all the fittings you need to attach to a pressure tank (sold seperately), which includes 6' of 1/2" Clear Funny Pipe Hose, a 1/2" FPT to 3/4" FPT (3/4" MPT to 1/4"FPT bushing included) to 1/2" MPT. We also clamp in the fitting to insure you don't get any leaks when installing your larger pressure tank! Needs a pressure tank that fits directly to this? Check out WP16130 for a large 4 gallon pressure tank.

Read more less

Description Use this high grade professional PVC to Blumat System adapter to go from your threaded 1/2" or 1/4" PVC pipe into a 3mm Blumat sensor. This includes a professional quick connect with water flow stop, makes it easy to disconnect from the system but water will still flow out when disconnected.  Convert your already existing irrigation system, into a smart Blumat automatic watering Blumat system. Only water your plants, when your plants want to be watered!

Read more less