Products

Description Easy-to-use professional quick connect for your 3mm Blumat line.

Read more less

Description Use a 3mm quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.

Read more less

DescriptionOur professional style quick connect/disconnect fitting that stop flows in either direction when disconnected. A budget option in this category of quick connect.

Read more less

Description Use these to branch out and run distribution drippers in two directions. You can also put them directly into a 1/2" or 3/4" drip line and install two Blumat sensors.

Read more less

Description Use these to branch out and run distribution drippers in two directions. You can also put them directly into a 1/2" or 3/4" drip line and install two Blumat sensors. Comes in a pack of 10.

Read more less

Description Use a 3mm to 8mm quick-connect to turn the water from your supply line to your drip line on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.

Read more less

Description These are great for connecting a plant when it's far away from the supply line, too far to make long 3mm lines - just use a tee and 8mm, adapt down to the 3mm with this.

Read more less

Description coming soon.

Read more less

Description 3mm Unions for Blumat tubing. A pack of 10.

Read more less

Description1/4" female insert fitting x 1/8" barbs. Usually used for multi pot drip emitter systems in commercial applications.

Read more less

Description Great for making your own custom-sized cap mat, good for lining seed trays and for use with the Surface-Blumat or manually filling up a tray. Use this in the middle, regular plastic under and the perforated black foil on top. To automate, use a Surface-Blumat or Tropf-Blumat in a pot. For larger systems, attach BluSoak to the Blumat.

Read more less

Description Capillary Mat System, 4’ x 4’ Here's a great, automated systems for growing seedlings, starts, and clones. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don't dry out or drown. Watch out for old info: this used to include a Blumat Surface mount but now it's an option along with using a Blumat sensor in one of the pots, manually adding water, wicking it with a strip of cap mat, and using a Surface Mount with Globe rather than connecting to pressure. Click here to download the instructions. The water wicks up from the bottom so it doesn't squeeze the oxygen out of your planting mix or disturb delicate seed sprouts like hand-watering easily does. https://www.irrigation.equipment/guide-to-blumat-regulated-capillary-mat-systems Components This set-up includes: 1 Capillary Mat 4' x 4' (IG16914)  1 - Perforated Black Foil, 1.2 meters wide (47.3") Anti-Algae (IG16354) 5 ft Super-Flex 8mm by the Foot Silicone Rubber Tubing (IG15634) 8 ft BluSoak 2.0 Drip Tape (IG18206) 4 Blumat Elbows - Bulk (IG14613) 4 Blusoak to 8mm Barbed Adapter (AG15807) 1 3mm Quick-Connect On-Off Adapter Valves (IG15939) This system needs to have a flat surface but it can be almost anything: a cement or tile floor, a plastic-covered sheet of plywood, metal or glass. Does not include Impermeable Plastic Layer you need for the bottom to keep the water in.

Read more less

Description Capillary Mat System, 4' x 8' Here's a great, automated systems for growing seedlings, starts, and clones. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don't dry out or drown. Click here to download the instructions. This system needs to have a flat surface but it can be almost anything: a cement or tile floor, a plastic-covered sheet of plywood, metal or glass. Does not include Impermeable Plastic Layer The water wicks up from the bottom so it doesn't squeeze the oxygen out of your planting mix or disturb delicate seed sprouts like hand-watering easily does. https://www.irrigation.equipment/guide-to-blumat-regulated-capillary-mat-systems/ Components This set-up includes: 8 ft. Capillary Mat 4' Wide (AG16037) 8 ft. Anti-Algae Perforated Black Foil (IG16354) 5 ft. Red 8mm Super-Flex Tubing IG15634 4 Blumat 8mm Elbows (IG15595) 3 ft. 3mm Drip Tubing for Blumat Systems (IG16021) 16 ft. Blusoak 2.0 Drip Tape (IG18206) 4 Blusoak to 8mm Barbed Adapter (AG15807)Watch out for old info: this used to include a Blumat Surface mount but now it's an option along with using a Blumat sensor in one of the pots, manually adding water, wicking it with a strip of cap mat, and using a Surface Mount with Globe rather than connecting to pressure.

Read more less

Description Grassroots Living Soil Fabric Raised Bed 4 x 8 x 1.5 Living Soil Raised Bed:Living Soil Raised Beds are the ideal way to maximize soil volume for your surface area. This living soil raised bed kit is made by Grassroots Fabric pots, and is complete with their moisture-lock plastic lining to ensure moisture makes its way into your bed--no more run-off from hydrophobic soil/media! If you don't see a size that will work for you, submit a custom order request and well take care of you! Dimensions: 46" W x 94" L x 1.5' H(Size is slightly smaller to allow the bed to fit inside a 4 x 8 tray.)Estimated gallons of soil: 300 gallons Our raised beds come with PVC fittings. All you'll need to do is get 1" PVC to complete the setup. These beds generally will hold up 3-5 years in an outdoor setting, or 5-8 years in an indoor setting. Components 4 x 8 Raised Bed Kit Includes: Fabric for Raised Bed (FE17152) Four 3-Way Fittings (IG17023) Two 4-Way Fittings (IG17025) Assembling your 4 x 8 raised bed kit - Please refer to the video below for more information on setting up your raised bed. Not included: You will need to purchase 1" PVC pipe lengths separately. Want more information? Link to Grassroots Raised Bed Guide here

Read more less

Description This easy-to-use valve makes switching back and forth between your supply line and nutrient feed easier. NOTE: This is just the valve, which is included in a flush system kit. Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Easily: Flush your plants Add thick nutrients and teas without clogging your Blumat sensors Clean out algal and bacterial slime, as well as sediment, from your supply lines Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding tick nutrient or tea, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake.

Read more less

Four Branches Arrow Dripper (4 pc 2102+ 4pc 50 cm PVC soft Pipe + 1pc 5135)

Read more less

Description 4-way Quick-Connect Valve, 8mm on all 3 sides with On/Off Valve, easily choose where to provide water in your irrigation system. 3 output valves and 4 different options (including all 3 valves open). Use this to easily be able to turn off the water supply to multiple sensors in a single spot. The high quality quick-connects allow for easy customization and can make your system as efficient as possible.

Read more less

Description This is the heart and soul of our Blumat flush systems - the 4-way valve. Rather than ordering all the extra parts and following a complex system, use this valve and customize your own. You can add several drip stakes for larger pots and use this in many different ways. This kit comes standard with fittings for 3 connections: one 3mm, one 1/4", and one 8mm for the supply line(s). NOTE: You can request different sizes or configurations for no extra charge. Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Easily: Flush your plants Add thick nutrients and teas without clogging your Blumat sensors Clean out algal and bacterial slime, as well as sediment, from your supply lines Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding tick nutrient or tea, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake.

Read more less

Crafted from high-quality, breathable fabric, these pots encourage healthy root growth and prevent root binding. Their design keeps soil cool and ensures proper air circulation, which is crucial for plant development.Featuring a durable construction with a double-stitched bottom seam and, in larger sizes, a triple hem, these pots are an eco-friendly and lasting choice. They are lightweight, easy to move, machine washable, and conveniently foldable for storage.Key Features: High-Quality Fabric: Encourages air flow and prevents root binding, essential for plant health. Durable Construction: Double-stitched seam and triple hemming on larger sizes ensure long-term use. Eco-Friendly Materials: Made from American-made polypropylene, free from BPA and heavy metals, and resistant to mold and mildew. Practical Design: Easy to move, machine washable, and folds for convenient storage. Variety of Sizes: Available in multiple sizes, suitable for a wide range of gardening projects. Understanding the Classic Fabric PotThe Grassroots Classic Fabric Pot is perfect for both indoor and outdoor gardening. Its breathable fabric is ideal for growing a variety of plants, from herbs and flowers to vegetables. The pot's design is beneficial for ensuring a healthy root system, making it a reliable choice for all seasons. Utilize the Grassroots Classic Fabric Pot for a natural, efficient, and successful gardening experience, maximizing your garden's potential.

Read more less

Water from the bottom up and let the roots decide. Fast watering from the top can squeeze out the air pockets in the soil and limit transpiration. This system keeps water always available for the plants without the negative effects of too much or too little water.

Read more less