Growers set up Blumat systems in many different situations with various kinds and sizes of supply line. These fittings and reducers allow you to customize an automated system in nearly any circumstance. Blumat systems come from Europe so most of the fittings are designed for European tubing measured in millimeters. Since people in the USA don't have good access to these diameters and thread sizes, it can be almost impossible to adapt a Blumats to a conventional drip or gardening system. Until now! We've found and assembled many different fittings to make this process easy. We can also special order these fittings in many different configurations and for many different pipe sizes. If you don't see exactly what you're looking for, just let us know - we can probably find the perfect part for you!
Fittings and Reducers
1/4" x 1/8" (3mm) transfer barb - 10 Pack
Description Punch into a drip line, and use these transfer barbs to get into 1/8" or 3mm tubing. 10-Pack of barbs
$2.86
Quick Connect Bulk Head Fitting, 8mm
Description High quality, easy to use bulkhead fittings that automatically stop the water when a line is disconnected. Just a quick twist connects or disconnects supply tubing. These are a little expensive but pay for themselves quickly if you need to change lines frequently. Great for flushing by letting you quickly change from a reservoir with nutrients to one with just water. Also very helpful if you use different nutrients at different times. We also have adapters so you can connect these to 3mm or 1/4" line.Use a 5/8" drill bit to install these into any container of your choice.
$12.51
1/4" Quick Connect Fittings w/ Stop/Plug
Description Quick Disconnect - Connect Fittings for Blumat 1/4" spaghetti tubing, what nearly every drip irrigation system uses. An easy and inexpensive way to be able to connect/disconnect your main 1/4" small tubing with just one quick rotation. Includes a quick connect female fitting, male fitting, and a stop plug to connect to the male fittings so you can stop water from exiting the line. Buy an On/Off Valve to be able to turn off/on incoming water supply, valve sold separately (IG15936). Or buy the more expensive Professional Quick Connects for the quickest and most efficient way to disconnect your water line while being able to stop the flow of water from both input and/or output. This makes it easy to bring Blumat sensor "carrots" in during the winter.
$1.76
Tropf Blumat Tee and End Piece Pack (2 Sets)
Description These let you split off branch feeder tubes and terminate them instead of making wide loops with your feeder tube. Outside for big plants you may not need to use these but for smaller areas and greenhouses, they really help. Contains 2 tees and 2 end-pieces.
$5.05
3mm Tubing Union - 10 Pack
Description 3mm Tubing Union for Blumat tubing. A pack of 10.
$7.98
Garden Hose Adapter - 3/4" Male Hose Thread (MHT) to 8mm Barbed Insert
Description Conventional Garden Hose Adapter for a 3/4" Hose Thread to 8mm Barbed Insert, easiest way to connect your 8mm tubing to a conventional hose or any 3/4" female hose outlet. This is product to save you a hardware trip, added to our website for your inconvenience. Specs: Weight 0.012 lbs HOSE BARB 1/4" THREAD 3/4" NHR MATERIAL Black Nylon (BN) COLOR Black HEX 1 2/16
$1.45
BLUMAT 8mm SHUT-OFF VALVE - Packaged
Description BLUMAT-READY - These valves are ready to be installed in-line in 8mm tubing in seconds! EASY CONTROL - Turn on/off water supply at the turn of a valve to your whole blumat system! HIGH QUALITY/ENDURING - Made simply & w/ care by Blumats you trust, you can expect these to last! PURGE - These work perfectly at the end of 8mm tubing to purge air and/or debris from the line! AUSTRIAN-MADE - Leave it to the Austrians to design and engineer such a foolproof device! These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! These can be used to turn on/off water supply to your entire garden, or just branches of your garden (or even individual plants, plant rows, etc.--your imagination is the limit!). PLOT TWIST: These blumat fittings can also be used as purge valves. A purge valve is used to remove air, particulate matter, or other debris from a water supply line. This can be accomplished in two different ways. One is simply by concluding an 8mm tubing or line with one of these valves. The valve will remain closed 99% of the time, but should be opened if air/debris is suspected in the tubing. The air and/or debris will flow out of the tubing when the valve is opened. The second way to install a purge valve in a blumat watering system is by cutting in the middle of a "loop" design, installing a 3-way 8mm Tee fitting, and installing one of these valves on the open-end of the tee. Simply open the valve to "purge" or clear your lines.
$6.80
Blumat 3mm Mini-hose Union - 3 Pack
Description Connect the 3mm tubing used for Tropf Blumat sensors, Blumat Distributor Drippers, or Blumat Juniors.
$4.00
Blumat 8mm Hose Unions - 3 Pack
Description Use these to add more line for more plants as your garden grows, or get some just in case you cut into the wrong place or need fix a bad cut. The 3 pack comes in a blister-pack which is ideal for stores, storage, or for hanging up.
$8.00
8mm Tubing Clamps - 10 Pack
DescriptionKeep your tubing in place. 1/2" round clamp with nail for easy installation
$3.60
Blumat Quick Connect Fittings 8mm to 8mm
Description Quick disconnect -connect for Blumat 8mm tubing. an easy and inexpensive way to be able to connect/disconnect your main 8mm supply tubing with just one quick rotation. Buy an off/off valve to be able to turn off/on incoming water supply, valve sold separately (IG15936). Also a plug is now available so you have a cheap way to plug up the fittings as well. This makes it easy to bring the cone "carrots" in during the winter.
$2.00
3mm Tees - 10 Pack
Description Use these to branch out and run distribution drippers in two directions. You can also put them directly into a 1/2" or 3/4" drip line and install two Blumat sensors. Comes in a pack of 10.
$11.55
