Growers set up Blumat systems in many different situations with various kinds and sizes of supply line. These fittings and reducers allow you to customize an automated system in nearly any circumstance. Blumat systems come from Europe so most of the fittings are designed for European tubing measured in millimeters. Since people in the USA don't have good access to these diameters and thread sizes, it can be almost impossible to adapt a Blumats to a conventional drip or gardening system. Until now! We've found and assembled many different fittings to make this process easy. We can also special order these fittings in many different configurations and for many different pipe sizes. If you don't see exactly what you're looking for, just let us know - we can probably find the perfect part for you!
Fittings and Reducers
Perma-Loc 1/2" Elbow
Description Connect two pieces of 1/2" tubing at a 90° angle.
$2.99
3/4" Female Hose Thread (FHT) to 8mm Barbed Insert - Garden Hose Adapter
Description Conventional Garden Hose Adapter for a 3/4" Female Hose Thread to 8mm Barbed Insert, easiest way to connect your 8mm tubing to a conventional hose or any 3/4" male hose outlet. Extremely hard to find anywhere but we managed to find it internationally and have it shipped to us. This is product to save you a hardware trip, added to our website for your inconvenience.
$6.30
Blumat PVC Adapter - 1/2" MPT to 8mm Barbed
Description Easiy attach Blumat 8 mm tube to irrigation line, PVC, or even a garden hose (with a hose to pipe adapter). This has a male insert fitting for the 8 mm tube and a 1/2" male pipe thread on the other
$2.00
Blumat 3mm Tee - 3 Pack
Description Multi-use tee connectors for the 3 mm line that comes with each Blumat carrot. Use these to send distribution drippers in different directions, to connect into drip tubing and give water to 2 carrots, and to make watering circles around plants.
$3.40
Perma-Loc 1/2" Tee
Description Connect three pieces of drip tubing in "T" shape.
$3.97
8mm BULKHEAD / Through-Hull Tank Connector - 4 Pack
Description 4 Blumat Thru-Hull Tank Connectors to attach 8 mm Blumat water supply line to a rain barrel or water storage tank. This is your classic bulkhead fitting, made in Austria, high quality and efficient for a Blumat System. Bulkhead fittings allow you to penetrate through a wall or barrier, while allowing passage within the fitting. This allow you to tap into a tank of water, while allowing water to pass-through the bulkhead fitting, and into a water supply line. We have these pre-drilled into our 5-gal bucket reservoir, see related products below. Have your own reservoir? No problem, simply drill 1/2" holes into your own water tank and convert it into a Blumat Reservoir. We have even higher quality bullhead fittings, some that stop water flow when disconnected. Check out our bulkhead fittings category. *Reservoir not included, look into Blumat Reservoir or 5-gal bucket if you need a reservoir
$19.45
Quick Connect Bulkhead Fitting w/ Stop on Both Ends, 8mm
Description High quality, easy to use bulkhead fittings that automatically stop the water at both ends when a line is disconnected. Just a quick twist connects or disconnects supply tubing. Great for flushing -- quickly change from a reservoir with nutrients to one with just water. Also very helpful if you use different nutrients at different times. We also have adapters so you can connect these to 3mm or 1/4" line.
$21.00
3mm Quick Connect On/Off Valve
Description Use a 3mm quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$4.75
Blumat Elbows - 3 Pack
Description These really help in greenhouses and raised beds. They help you neatly go around corners in your Tropf Blumat irrigation system. The right-angled elbow eliminates bends in the tubing that can limit the flow in your irrigation system. The black plastic is robust and barbed at both ends to hold the tube securely in place. Contains three 8mm (5/16") elbows.
$4.00
Blumat 8mm Bulkhead/Through-Hull Tank Connector - Packaged
Description To attach 8 mm Blumat water supply line to a rain barrel or water storage tank. This is your classic bulkhead fitting, made in Austria, high quality and efficient for a Blumat System. Bulkhead fittings allow you to penetrate through a wall or barrier, while allowing passage within the fitting. This allow you to tap into a tank of water, while allowing water to pass-through the bulkhead fitting, and into a water supply line. We have even higher quality bullhead fittings, some that stop water flow when disconnected. Check out our bulkhead fittings category. This particular product comes with packaging, or a blisterpack, that's perfect for storage, hanging, or display. Ideal for stores.
$5.60
1/2" Perma-Loc x 1/2" Perma-Loc x 8mm Tee w/ Valve
DescriptionReduces 1/2" poly tubing to 8mm (traditional Blumat supply line). Includes valve. Particularly useful when using 1/2" poly tube as supply line in large Blumat installations.
$12.43
Perma-Loc 1/2" Swivel Adapter
Description Connect standard hose fittings to drip tubing. 3/4" FHT to 1/2" Perma-Loc fitting.
$2.43
