Select a category below.
Blumat Pumps and Reservoirs
SHURflo Revolution Pressure Pump 8005
Description This is the pump we use in our Blumat Pressure systems. The 8005-233-236 ShurFlo Pressure pump is ideal for a Blumat irrigation system due to being rated for continuous use and its built in pressure switch. If you'd like to do your own version of this system, we highly recommend the pump model - we've tested quite a few and this one is the most dependable, quite, and has ideal pressure and flow specs. It's more expensive than other Shurflo models but with both a built in pressure switch and internal bypass, we haven't seen anything like it yet. This is a new and redesigned fresh water pump created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all systems. Constructed for high flow demand, low noise and no rapid cycling. SHURflo's quality reputation has been built on the reliability and dependability. The Revolution fresh water automatic demand pump is super quiet, thermally protected and can run dry without damage. Dimensions: 4.90 inch x 8.10 inch x 4.30 inch; Flow Rate 1.4 GPM. 115 VAC.
$177.45
SHURflo Accumulator Tank
Description This 21 Oz. OEM Accumulator Tank, includes a mounting bracket and has 1/2" female ports (the RV version has male threads). You can get by without using this is a pressure system but if you have it, the system will be quieter, run more smoothly, and the pump won't turn on as often. Materials: nylon housing, butyl diaphragm. Ports 1/2" NPT female. Dimensions 3.75" diameter x 8.75" long. Approvals NSF listed Max. Working Pressure 125 psi Guide to Pressure Accumulator Tanks
$73.20$43.92
1/2" Tee (insert-FPT-insert)
Description This is the brown fitting shown in the image that fits on top of accumulator tanks.
$2.51
SS Gear Clamps #10
DescriptionSS Gear Clamps #10
$1.84
SHURflo 4008-101-E65 3.0 Revolution Water , 12V DC version
Description 12 VDC, 3.0 GPM, 55 PSI, and 7.5 Amps Self-priming water pump with internal bypass-low cycling Operates quietly and thermally protected This pump can run dry wtihout damage and contains a built-in check valve Dry primes to 6 vertical feet and comes with a 2 Year Warranty
$124.95$74.97
5/8" Braided Clear Flex Tube - Food Grade Water Supply Tube - 100' Roll
Description This product is a "save a trip to the hardware store", you may be able to find 5/8" tubing cheaper but we have decided to add it to our website out of convenience. This is an extremely high quality 5/8" braided flex tubing that is transparent in design and made to be Food Grade and NSF compliant. Use this flexible tubing to easily run you water into your Blumat system. We normally use it only to run water into our pump systems, but these can be used in the same way any water supply line is run.
$203.70
Adjustable Dosatron Blumat Pressure Pump System
DescriptionWant to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.This kit uses the Dosatron D8RE2. This is fertilizer injector has a variable uptake range from 0.2%-2%. While more expensive than a standard model it allows for versatility and adaptability in your nutrient program.
$1,736.62
Dosatron Pressure Pump Kit for Blumat Systems
Description Want to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.
$1,023.35
Advanced Technology Products 5/8" Braided Clear Flex Tube - Food Grade Water Supply Tube - by the foot
Description This product is a "save a trip to the hardware store", you may be able to find 5/8" tubing cheaper but we have decided to add it to our website out of convenience. This is an extremely high quality 5/8" braided flex tubing that is transparent in design and made to be Food Grade and NSF compliant. Use this flexible tubing to easily run you water into your Blumat system. We normally use it only to run water into our pump systems, but these can be used in the same way any water supply line is run.
$2.21
Gravity Starter Kit
Five gallon bucket w/level indicator and two bulkheads combined with our small supply line kit. Prefect for any 4'x4' or 5'x5' tent. This is the independent kit used in many of our complete kits.
$110.40$77.00
Cable Plug Assembly Kit
Description coming soon.
$120.75$60.38
2" and 3" TIF Filter Cover
Description coming soon.
$183.92$119.55
