Blumat Kits

Description The ideal kit setup for a 4'x4' raised bed system! Neatly irrigate your garden bed with a manifold of four rows of BluSoak drip tape. This kit contains a single 9” Maxi Blumat. This allows for a dryback between irrigation events, a desired approach by some growers. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Reservoir- See our 5 gallon bucket reservoirs How it works The Tropf Blumat self-watering system functions automatically, without the need for timers. Each Blumat is both a sensor, a valve. and a dripper. As the soil dries, suction pulls open the valve within the blumat, allowing the flow of water through the 3mm tubing. As the soil reaches the desired moisture content, the suction is released, closing the valve. Each Tropf blumat waters completely independently. Therefore the plants are watered individually, naturally accounting for changes in the environment. Components Kit includes: 16' BluSoak 2.0 Drip Tape (IG18206) 4x Blumat 8mm Elbows (IG15595) 4x Blumat 8mm Tees (IG15581)  1x Tropf Blumat Maxi 9" Sensor Carrot (IG14607) 8x BluSoak 5/8" to 8mm Adapter (BluSoak Hose to 8mm Adapter Fitting) (AG15807) 1x Blumat 8x3x8mm Tee (IG15476) 8' 8mm Superflex Water Supply Tubing (IG15634) 4' 3mm Water Supply Tubing (IG16082V) 1x Blumat Protective Cap (IG15510) *Customer assembly is required

Read more less

Description These kits water up to six plants or a 3 square yard garden. Blumat systems can adjust to any plant type or desired moisture level. This specific kit comes with 9" carrots, or Maxis, which are designed for large plants (those in 15+ gallon pots) to get water deep into the soil. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners, you can easily install with a pair of scissors! It can directly connect to your reservoir or rain barrel or, with a pressure reducer, to a conventional watering system's hose or faucet. This kit includes six, 9" carrots (Maxis) and all parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. An optional Pressure Reducer attached to garden hose or faucet can provide enough water for up to 500 Blumat Carrots (See 'Related Products'). If your reservoir does not have a thru-hull installed, you will have to drill a hole into your reservoir bucket and install a thru-hull piece. For our customers' convenience, we also sell 5-gallon reservoirs with thru-hulls already installed. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. This system does not include a water source. See our 5-gallon Reservoirs here, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 6 Blumat Maxi carrots (9") (IG16341) 7 meters (23 Feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Elbow Splitter (IG15595) 1 Blumat Hose Union (IG15638) 1 Blumat End-Piece (IG15986) 1 Blumat Reducing Tee (IG15476) 1 Rain Barrel/Gravity Tank Connector (Blumat Thru-Hull Tank Connector) and Installation Instructions (IG15691)

Read more less

Description This kit provides an easy, fast, and water-saving way to water a 2ft by 4ft bed, either raised or in your garden. No timers, batteries, or electricity required! This system utilizes Blumat carrots (sensor) to automatically water and monitor the moisture levels in your garden soil. BluSoak tape allows for even water distribution throughout. When coupled together with Blumat carrots, BluSoak hose only delivers water to your veggies when they need it, which promotes exponential growth and impressive yields. You can also leave your BluSoak tape under your garden all winter, no problem. Water source needs to be 6-10' above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Reservoir- See our 5 gallon bucket reservoirs Want more information? Here's a guide to Grassroots Raised Bed.  Components Kit includes: 8' BluSoak 2.0 Drip Tape (IG18206) 4x Blumat 8mm Elbows (IG15595) 1x Tropf Blumat Maxi 9" Sensor Carrot 1x Tropf Blumat 5" Sensor Carrot (IG14607) 4x BluSoak 5/8" to 8mm adapter (BluSoak hose to 8mm adapter fitting) (AG15807) 2x Blumat 8x3x8mm Tee (IG15653) 4' 8mm Superflex Water Supply Tubing (IG15634) 7' 3mm Water Supply Tubing *Customer assembly is required Click here to download the instructions.

Read more less

Description This kit provides an easy, fast, and water-saving way to water a 3ft by 6ft bed, either raised or in your garden. No timers, batteries, or electricity required! This system utilizes Blumat carrots (sensor) to automatically water and monitor the moisture levels in your garden soil. BluSoak tape allows for even water distribution throughout. When coupled together with Blumat carrots, BluSoak hose only delivers water to your veggies when they need it, which promotes exponential growth and impressive yields. You can also leave your BluSoak tape under your garden all winter, no problem. Water source needs to be 6-10' above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Reservoir- See our 5 gallon bucket reservoirs Want more information? Here's a guide to Grassroots Raised Bed.  Components Includes the following: 50' BluSoak 2.0 Drip Tape (IG18206) 10 BluSoak to 8mm Ddapter (AG15807) 6 Blumat Tees 8mm (IG15596) 4 Blumat Elbows (IG15595) 2 Blumat Reducing Tee - 8x3x8mm (IG15653) 1 Tropf Blumat Sensor 5" (IG14607) 1 Tropf Blumat Sensor Maxi 9" (IG14618) 12' Super-Flex 8mm Tubing (IG15634) 10' 3mm Drip Tube (IG16021) 12 7" BluSoak Hold down Stakes (IG16789) Click here to download the instructions.

Read more less

Description Traditional drip irrigation systems generally emit water in one or two places. This distributes moisture unevenly, hindering plant growth, and making sensors inaccurate. Blusoak plant rings even out the moisture creating consistent conditions for the Blumat sensors to monitor. The Blumat sensor gives you precise control over the moisture content in your container. You can easily change the moisture setting if you have temperature, humidity, or life cycle changes. All the components in this kit can function at very low pressure allowing for gravity systems as well as pressurized sources. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Instructions for plant ring set up are here. To properly install the Blumat Sensor, see the Tropf Blumat Installation Guide here. Components This Kit Includes: 5’ of Blusoak 2.0 Drip Tape (IG18206) 3mm to Blusoak Tee (IG18838) 3’ of 3mm Drip Tube (IG16021) 1 Maxi 9” Blumat Sensor (IG14618) Blumat Protective Cap (IG15510) 3 BluSoak Stakes, Mega (IG16320) BluSoak to 8mm Barbed Adapter (AG15807)

Read more less

Description The ideal kit setup for a 4ft by 8ft raised bed system! Neatly irrigate your garden bed with a manifold of four rows of BluSoak drip tape. This kit contains a single 9” Maxi Blumat. This allows for a dryback between irrigation events, a desired approach by some growers. Click here to download the instructions. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Reservoir- See our 5 gallon bucket reservoirs How it works The Tropf Blumat self-watering system functions automatically, without the need for timers. Each Blumat is both a sensor, a valve. and a dripper. As the soil dries, suction pulls open the valve within the blumat, allowing the flow of water through the 3mm tubing. As the soil reaches the desired moisture content, the suction is released, closing the valve. Each Tropf blumat waters completely independently. Therefore the plants are watered individually, naturally accounting for changes in the environment. Want more information? Here's a guide to Grassroots Raised Bed. Components Kit includes: 32' BluSoak 2.0 Drip Tape (IG18206) 4x Blumat 8mm Elbows (IG15595) 4x Blumat 8mm Tees (IG15596) 1x Tropf Blumat Maxi 9" Sensor Carrot (IG14618) 8x BluSoak 5/8" to 8mm adapter (BluSoak hose to 8mm adapter fitting) (AG15807) 1x Blumat 8x3x8mm Tee (IG15653) 8' 8mm Superflex Water Supply Tubing (IG15634) 8' 3mm Water Supply Tubing (IG16021) 1x Blumat Protective Cap (IG15510) *Customer assembly is required

Read more less

Description Our XL kits are designed to water areas up to 6.5 square meters. This Pressure kit is designed to attach to your garden hose bib/spigot. Blumat systems can adjust to any plant type or desired moisture level. This specific kit is perfect for large home gardens and greenhouses. 40 Blumat sensors will ensure that your crops are properly watered - even when you're not home! Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. This kit includes forty, 5" carrots and all the parts required to connect your system to a hose or water spigot. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat system are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand your system to your specific needs. How it works  The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. If you want to use a reservoir see our 5-gallon Reservoirs, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. Note: Blumat Classics (Juniors) and bottle adapters are designed for houseplants while Tropf-Blumat Sensors (the one's with the small adjustable brown knob on top) are designed for greenhouses, growrooms, decks, and outside gardens. Blumats Austria says "Please don't use the Tropf-Blumats indoors" because if hooked up to a constant water source and a pet, guest, or user-error somehow causes a run-away, it could damage an indoor floor, drywall, carpet, or furniture. We, and many others, do in fact use these systems inside ourselves, however, we are generally around enough that if a problem did occur, we would be able to notice a problem and fix it in time (not the case if someone is on vacation). We have many guides for being able to set these up the proper way and avoid a run-away or general mistakes. Please contact us for any help, we are always here to help make your life easier. Components This Kit Includes: 40 Tropf Blumat Carrots (5") 15 Meters (Roughly 50 Feet) of Hose 1 Pressure Reducer (IG16242) 2 8mm Elbows (IG15564) 2 8mm Tees (IG15596) 2 8mm Unions (IG15638) 2 - 8mm x 3mm End Pieces (IG15986) 2 - 8mm x 3mm x 8mm Tees (IG14611) Instructions for Installation

Read more less

Description The ideal kit setup for a 2ft by 4ft raised bed system! Neatly irrigate your garden bed with a manifold of two rows of BluSoak drip tape. This kit contains a single 9” Maxi Blumat. This allows for a dryback between irrigation events, a desired approach by some growers. Click here to download the instructions. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Reservoir- See our 5 gallon bucket reservoirs How it works The Tropf Blumat self-watering system functions automatically, without the need for timers. Each Blumat is both a sensor, a valve. and a dripper. As the soil dries, suction pulls open the valve within the blumat, allowing the flow of water through the 3mm tubing. As the soil reaches the desired moisture content, the suction is released, closing the valve. Each Tropf blumat waters completely independently. Therefore the plants are watered individually, naturally accounting for changes in the environment. Want more information? Here's a guide to Grassroots Raised Bed. Components This Kit Includes: 8' BluSoak 2.0 Drip Tape (IG18206) 4x Blumat 8mm Elbows (IG15595) 1x Tropf Blumat Maxi 9" Sensor Carrot (IG14618) 4x BluSoak 5/8" to 8mm adapter (BluSoak hose to 8mm adapter fitting) (AG15807) 1x Blumat 8x3x8mm Tee (IG15653) 4' 8mm Superflex Water Supply Tubing (IG15634) 1x Blumat Protective Cap (IG15510) *Customer assembly is required

Read more less

Description This kit provides an easy, fast, and water-saving way to water a 1 to 5 gallon pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. Water source needs to be above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) *Customer assembly is required. How it Works The Tropf Blumat self-watering system functions automatically, without the need for timers. Each Blumat is both a sensor, a valve and a dripper. As the soil dries, suction pulls open the valve within the Blumat, allowing the flow of water through the 3mm tubing. As the soil reaches the desired moisture content, the suction is released, closing the valve. Each Tropf Blumat waters completely independently. Therefore the plants are watered individually, naturally accounting for changes in the environment.For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Click here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG17188) 2' of 3mm Drip Tube (IG15473V) 1 Universal Stake (IG16314) 1 Blumat Protective Cap (IG15510)

Read more less

Description This kit provides an easy, fast, and water-saving way to water a 30 gallon pot. No timers, batteries, or electricity required! Click here to download the instructions. This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. BluSoak tape allows for even water distribution throughout. When coupled together with Blumat carrots, BluSoak hose only delivers water to your veggies when they need it, which promotes exponential growth and impressive yields. You can also leave your BluSoak tape under your garden all winter, no problem. Water source needs to be 6-10' above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer.What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fittings for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes Fittings (tee's, elbows, couplers, etc.) for your custom system. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. It is easily installed with a pair of scissors and connects directly to your hose, or rain barrel with the help of the Pressure Reducer or Thru-Hull Bulkhead Fittings. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. PLEASE NOTE: This system does not include a water source. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG17188) 1 Blumat Maxi Carrot (9") (IG16341) 2 BluSoak Tape Fittings to 3mm (IG16085) 12 feet BluSoak 2.0 Drip Tape (IG18206) 3 feet of 3mm Tubing (IG16021V) 3 4" Mega Stakes (IG16320) *Customer assembly is required.

Read more less

Description This small kit comes with a Pressure Reducer, which allows you to connect and operate your system with a hose/water faucet and/or a custom pump (pressurized) system. This kit comes with 8 Blumat carrots (5"), however, a system utilizing a pressure reducer can be expanded to have up to 500 different watering spots or drippers. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. It is easily installed with a pair of scissors and connects directly to your hose, tap or rain barrel with the help of the Pressure Reducer. This kit includes eight, 5" carrots and all parts required for a pressure-fed system. This kit includes a Pressure Reducer, which allows you to connect your Blumat system to a hose or rain barrel. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops dripping water. Each Blumat Outdoor Sensor in the Small Box Kit covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. You must have a hose bib water source for this system to connect to. If you would like to convert the system to a stand-alone gravity system, see our 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 8 Blumat Carrots (5") (IG17188) 1 Pressure Reducer (IG16242) 7 Meters (23 feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Reducer Tee (IG15476) 1 Elbow Splitter (IG15564) 1 Hose Coupler (IG15638) 1 Hose End-Piece (IG15986) 1 Rain Barrel/Gravity Tank Connectors (IG15691)

Read more less

Description This kit provides an easy, fast, and water-saving way to water a 50 to 75 gallon pot. No timers, batteries, or electricity required! Click here to download the instructions. This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. BluSoak tape allows for even water distribution throughout. When coupled together with Blumat carrots, BluSoak hose only delivers water to your veggies when they need it, which promotes exponential growth and impressive yields. You can also leave your BluSoak tape under your garden all winter, no problem. Water source needs to be 6-10' above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer.What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When your soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops water flow. Essentially, water will seep through your BluSoak hose only when your plants need it, thanks to Blumat technology. For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Maxi Carrot (IG14618) 12 feet BluSoak 2.0 Drip Tape (IG18206) 4 BluSoak Securing Stakes (5") (IG16320) 1 BluSoak Fittings (Tape to Sensor) (IG16085) 1 BluSoak End Plug (To End Drip Tape) (IG16065) *Customer assembly is required.

Read more less