Please see the Blumat Information page for detailed information on Blumats. In a nutshell, The Tropf (tropf is Austrian for drip) Blumat has become the ideal watering method for growing in greenhouses, for indoor gardening, on decks and in planter boxes, as well as for certain kinds of outdoor plants. It's the evolution of drip irrigation.
Description 10-Pack Use a quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$46.95
Description The NEW EasySoak System for 4' x 8' Beds The newest addition to the Blumat Systems and Sustainable Village catalog, similar to BluSoak but without the carrot. EasySoak features the highest quality Soaker Hose (drip tape), along with a flow restrictor and fittings to connect directly to your garden hose or hose bib (spigot). Simply tap into your water source, lay out the soaker hose onto your single 4' x 8' bed, and your ready to irrigate! The EasySoak system is left on all day and night, timers are optional! The flow restrictor limits the flow of water entering the drip tape, in this system you will get approximately 6.25 gallons of water per day. Want to save water? Either just manually turn off your garden hose or add a timer to turn it off at night. Bury the BluSoak drip tape to extend its lifetime, we have had farms using the same EasySoak drip tape for 25+ years! Components This Kit Includes: 33' of Original BluSoak Drip Tape (IG16073) 1 Green Flow Restrictor (for 25' to 50' of Soaker Hose) (IG16330) 1 GHT Female Adapter to 8mm Barbed Fitting (IG16721) 1 BluSoak to 8mm Adapter (AG15807) 1 BluSoak End Plug (IG16065) 10 Stakes Made Ideally for Drip Tape (IG16726) 1 BluSoak Coupler (For Repair) (IG16092) 1 3/4" MPT x 1/2" FHT & 3/4" MHT (IG17163)
$52.30
Description BluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape. They also do not rust because they are made of high quality plastic rather then metal. Approximately, 7" tall, and 1" wide.
$0.52
Description Use a 1/4" quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$4.70
Description1/4" female insert fitting x 1/8" barbs. Usually used for multi pot drip emitter systems in commercial applications.
$0.40
Description The NEW EasySoak System The newest addition to the Blumat Systems and Sustainable Village catalogue, similar to BluSoak but without the carrot. EasySoak features the highest quality Soaker Hose (drip tape), along with a flow restrictor and fittings to connect directly to your garden hose or hose bib (spigot). Simply tap into your water source, lay out the soaker hose, and your ready to irrigate! The EasySoak system is left on all day and night, no need to add timers! The flow restrictor limits the flow of water entering the drip tape, so you are only getting a pint of water, for every foot of drip tape, per 24 hours. Bury the BluSoak drip tape to extend its lifetime, we have had farms using the same BluSoak drip tape for 25+ years! Components This kit includes: 100' of Original BluSoak Drip Tape (IG16073) 1 Blue Flow Restrictor (For 25' to 100' of Soaker Hose) (IG16330) 6" of 8mm Black Tubing (IG16329) 1 GHT Female Adapter to 8mm Barbed Fitting (IG16721) 3 BluSoak Coupler (In Case of Repair) (IG16092) 1 3/4" MHT x 1/2" FPT & 3/4" MPT (Adapter) (IG15620) 1 BluSoak to 8mm Adapter (AG15807) 1 BluSoak End Plug (IG16065) 30 Hold Down Stakes (IG16314) *Note: BluSoak works best on flat surfaces. If your landscape has more than a 1% slope, then the moisture won't spread evenly. As a solution you may need to use individual sections of BluSoak or have us recommend an alternative system.
$135.52
Description The NEW EasySoak System The newest addition to the Blumat Systems and Sustainable Village catalogue, similar to BluSoak but without the carrot. EasySoak features the highest quality Soaker Hose (drip tape), along with a flow restrictor and fittings to connect directly to your garden hose or hose bib (spigot). Simply tap into your water source, lay out the soaker hose, and your ready to irrigate! The EasySoak system is left on all day and night, no need to add timers! The flow restrictor limits the flow of water entering the drip tape, so you are only getting a pint of water, for every foot of drip tape, per 24 hours. Bury the BluSoak drip tape to extend its lifetime, we have had farms using the same BluSoak drip tape for 25+ years! Components This Kit Includes: 50' of Original BluSoak Drip Tape (IG16073) 1 Green Flow Restrictor (for 25' to 100' of Soaker Hose) (IG16329) 6" of 8mm Black Tubing (IG15611) 1 GHT Female Adapter to 8mm Barbed Fitting (IG16721) 2 BluSoak coupler (In Case of Repair) (IG16749) 1 3/4" MHT x 1/2" FPT & 3/4" MPT (Adapter) (IG15620) 1 BluSoak to 8mm Adapter (AG15807) 1 BluSoak End Plug (IG16065) 15 Hold Down Stakes (IG16789)
$76.56
Description This is a convenient fitting for any EasySoak or Soaker Hose System. Normally comes with a Flow Restrictor Ring but in case you already have one, or would like to purchase multiple type of flow controller rings, then this is product for you! Once you have this, all you need for an easy soak system is the appropriate Flow Controller, however many feet of BluSoak 2.0 Drip Tape, and a BluSoak plug. That's it! Includes the Following Parts Assembled Together: 1 3/4" Female Hose Thread fitting x 8mm barb 6" of 8mm Black tubing 8mm barb x BluSoak adapter
$7.94
Description8mm Cross that works best our Super-Flex silicon tubing.
$3.15
Description This 3/4" male pipe thread adapter makes it easy to go from conventional drip tubing into a Blumat system. An 8mm barbed adapter, it easily connects to Blumat 8mm tubing. Saves a hardware trip and makes this transition with one part instead of 3. COLOR Black HOSE BARB 8mm THREAD 3/4" NPT MATERIAL Black Nylon (BN)
$1.42
Description This kit provides an easy, fast, and water-saving way to water a 5 gallon fabric pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. On top of this, there are 5 additional distribution drippers in order to drip onto five different areas of the 5 Gal pot. Water source needs to be above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) *Customer assembly is required.How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When your soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops water flow. Essentially, water will seep through your BluSoak hose only when your plants need it, thanks to Blumat technology. For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG14607) 4 Distribution Drippers (In-Line) (IG15557) 1 Distribution Dripper End-Piece (IG15558) 2 ft. 3mm Drip Tubing (IG16021V) 5 Universal Hold-Up Stakes (IG15924)
$21.60
Description This kit provides an easy, fast, and water-saving way to water a 5 gallon fabric pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. On top of this, there are 3 additional distribution drippers in order to drip onto three different areas of the 5 Gal pot. Water source needs to be above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) How it Works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When your soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops water flow. Essentially, water will seep through your BluSoak hose only when your plants need it, thanks to Blumat technology. For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG17188) 2 Distribution Drippers (in-line) (IG15565) 1 Distribution Dripper End-Piece (IG15558) 1 foot of 3mm drip tube (IG15473V) 3 Universal Hold-Up Stakes (IG16789) *Customer assembly is required.
$17.28
