Description
The IRROMETER Model LT (Low Tension) tensiometer was designed to operate in coarse sandy soils and non-soil growing media. With a range of 0-40 centibars (cb) or kilopascals (kPa), this instrument is for use in situations where tensions above 30 cb (kPa) are rarely expected. Gauge increments of 1 cb (kPa) provide a benefit where finer resolution near saturation is needed. This model instrument is also well suited for conditions where rapidly changing soil moisture conditions need to be observed. The "Quick-Flo" ceramic tip is colored blue for easy identification.
Model LT IRROMETERS can be used for manual measurement and tracking of soil moisture status in coarse sandy soils and growing media. When equipped with optional electronic output and data logging equipment, measurement and tracking can be done automatically. The low tension vacuum gauge on this model can be replaced with electronic measurement options, or automatic switching devices which can activate peripheral equipment at desired soil water tension levels. See the "Automation and Output Options" specifications for more details. The Model LT is the best choice for container media such as peat, bark, sand, perlite and vermiculite. It can also be used in any soil when the moisture is being managed close to field capacity.
Click here for Irrometer's instruction manual.
Description
12 VDC, 3.0 GPM, 55 PSI, and 7.5 Amps Self-priming water pump with internal bypass-low cycling Operates quietly and thermally protected This pump can run dry wtihout damage and contains a built-in check valve Dry primes to 6 vertical feet and comes with a 2 Year Warranty
Description
SSAT (Soil Solution Access Tubes), or Suction Lysimeters, were developed to easily extract soil water samples for testing. They provide the user with an accurate method of determining salinity or plant nutrient levels. Because the sample is collected at root zone depth, it reflects the true impact fertilization has on the plant material. Understanding soil water conditions helps the user make informed fertigation scheduling decisions resulting in improved yield and reduced fertilizer, water, labor and energy costs. Features:
Easy to install and use
Standard ceramic tip (white) for most soil types
Optional Double Suction line for longer tubes
Collects soil water sample at the root zone Crop consultants, irrigation professionals and researchers find the SSAT particularly useful because of its ability to easily gather soil water samples for testing. Commercial growers see the value of soil water sampling at the root zone because it reflects the net "effect" that fertilization has as it interacts with previously applied nutrients in the soil. Scientists also use this equipment when identifying and researching environmental contaminants and their movement in soil. Click here for Irrometer's instruction manual.
Description
The 902-200 controller comes in an outdoor enclosure with water level sensors and sensor wire. It can be operated from a 12V or 24V array. The 902-100 control must be mounted in a dry location and used with a 24V array. 1 year warranty.
The built-in "Linear Current Boosting" circuits optimize yoiur solar water pumping system by translating the current and voltage from your DC power source into a combination that is better matched to that needed by the pump. In addition to increasing your pumping system's efficiency, the 902-200 DC Pump Controller provides your pump with protection from excessive or insufficient voltage. The controller also has the ability to automate your pumping system, ensuring that the pump does not run when the well water is too low (level sensing probes are included) or the reservoir is full (float switch must be purchased separately). The optimization, protection, and automation this controller provides make it an important component in a well designed solar water pumping system.
A commercial-grade, 2-Stage, 4.5" x 10" filtration system designed for flows up to 15 GPM. Leak-proof fittings, FDA grade, NSF listed. Includes mounting bracket, stainless steel gauges, sediment micron options of 20,10,5,1, and carbon Micron Options of 10 or 5.
Filter the water supplyFlows up to 15 GPM, depending upon filters utilized.
Screws, and filter wrench.10" Commercial-Grade Cartridge Filter Housing With 3/4" or 1" Inlet/Outlet - Includes Pressure Relief Valve
Description
Real-time, accurate data showing you the moisture levels at each sensor in your system - too wet, too dry, or just right! It not only gives you the here-and-now information but also has an adjustable timeline for historic and/or specific dates and times. For example, you can start with a 3-month graph and then zoom in on any day and time.Although very simple, easy to use and interpret, it still provides vital, accurate, and critical information. It even tells you how many hours and minutes your irrigation system was on as well as rain gauge information (if you get that option).The four C batteries that normally last more than 2 years power the IrroCloud which connects with up to 6 Voltage Irrometers for soil moisture readings. These sensors report directly to the IRROcloud platform without any need for additional gateways or devices. If not the most, at least one of the most simple, affordable, and reliable solutions for automatically collecting sensor data and storing it in the cloud, for quick access at any time. Since the IrroCloud doesn't require an external power source or even a solar panel, you can easily install it in even the most challenging fields and orchards.The IRROcloud web application provides an intuitive interface with a quick reference dashboard and graphing suite.
Description
This kit is ready for integration with dosatron systems or our high-flow pump kit. This features a BlueLab Guardian EC and pH monitor, so you know your fertilizer is being properly adminstered.
Flow rates: up to 80 GPM (18.1 m3/h)
Operating pressure: up to 120 PSI (8.4 BAR)
Temperature range: up to 130°F (54°C)
Stainless steel screens from 80 to 200 mesh
Inlet and outlet size: 1 1/2" and 2" MPT
