AquaMat Kits

Description Self contained design. Best to use with mixes at least 50% peat. Can use with fabric pots, beds, or plastic pots with holes in the bottom larger than 1/8". Must be used on a level surface. Take extra precautions when laying mats directly on the ground--it should be clear of debris and gravel. Ideally, the ground should be covered by compacted sand or geotextile. Does not include Blumat Irrigation System Potential Benefits (Compared to Hand-Watering) Save 92% on labor Save 70% on water consumption Increase growth by 12.5% Reduce fertilizer use by 80% Specifications Water Capacity: 2.1Gal/Sq Yard (9.5L/Sq Meter) Mat flow rate: 0.007 Gal/min/Sq Ft (0.3L/min/Sq Meter) Integrated with BluSoak Drip Tape Things to Keep in Mind: Start capillary action by combining overhead and sub irrigation (for about 7 days, continue overhead watering) Ensure soil or growing medium is moist Slope must be less than 0.5%. If slope is greater, split water injections into more frequent but shorter intervals Use with pressure reducers and/or gravity-feed Continue until roots have developed or the capillary link has been established Water consumption should be 50-80% lower than with overhead systems--runoff occurs when mats are filled for 25 minutes or more. Reduce fertilization rates by 50% due to lack of run-off Maintenance Disinfect, sweep, and rinse after each crop Repair tears on cover Store below 105F (40C) and protect against UV rays For short-term storage, clean the mats, roll them, and cover with a tarp https://www.irrigation.equipment/guide-to-blumat-regulated-capillary-mat-systems/

Read more less

Description Multilayered. Self contained design. Best to use with mixes at least 50% peat. Can use with fabric pots, beds, or plastic pots with holes in the bottom larger than 1/8". Must be used on a level surface. Take extra precautions when laying mats directly on the ground--it should be clear of debris and gravel. Ideally, the ground should be covered by compacted sand or geotextile. Does not include Blumat Irrigation System Potential Benefits (Compared to Hand-Watering) Save 92% on labor Save 70% on water consumption Increase growth by 12.5% Reduce fertilizer use by 80% Specifications Water Capacity: 2.1Gal/Sq Yard (9.5L/Sq Meter) Mat flow rate: 0.007 Gal/min/Sq Ft (0.3L/min/Sq Meter) Integrated with BluSoak Drip Tape Things to Keep in Mind: Start capillary action by combining overhead and sub irrigation (for about 7 days, continue overhead watering) Ensure soil or growing medium is moist Slope must be less than 0.5%. If slope is greater, split water injections into more frequent but shorter intervals Use with pressure reducers and/or gravity-feed Continue until roots have developed or the capillary link has been established Water consumption should be 50-80% lower than with overhead systems--runoff occurs when mats are filled for 25 minutes or more. Reduce fertilization rates by 50% due to lack of run-off Maintenance Disinfect, sweep, and rinse after each crop Repair tears on cover Store below 105F (40C) and protect against UV rays For short-term storage, clean the mats, roll them, and cover with a tarp https://www.irrigation.equipment/guide-to-blumat-regulated-capillary-mat-systems/

Read more less

Description Bottomless pots and capillary mats make an ideal partnership. This kit is excellent for growers who want to minimize labor while growing high-quality starts. Click here to download the instructions. Because the water comes from the bottom, roots spread out and grow down instead of only out. The tiny holes in the capillary mat's top layer prevents the roots from growing into it but keeps them ready for a new home. To transplant outside or into a bigger pot or bed, just pick up and put the pot on top of your soil or planting mix - no need to dig a hole and cut into the soil’s microbe networks. After the roots have sufficiently decomposed, you can easily lift away your sleeve for re-use. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fittings for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Surface Blumats Either an 8mm x 8mm elbow or an 8mm shut-off valve to put at the end of your supply line Components This Kit Contains: 20 1 Gallon Grassroots Sleeves (IG18466) 1 Complete 4'x4' Capillary Mat System (IG19267)

Read more less

Description Bottomless pots and capillary mats make an ideal partnership. This kit is excellent for growers who want to minimize labor while growing high-quality starts. Click here to download the instructions. Because the water comes from the bottom, roots spread out and grow down instead of only out. The tiny holes in the capillary mat's top layer prevents the roots from growing into it but keeps them ready for a new home. To transplant outside or into a bigger pot or bed, just pick up and put the pot on top of your soil or planting mix—no need to dig a hole and cut into the soil’s microbe networks.After the roots have sufficiently decomposed, you can easily lift away your sleeve for re-use. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fittings for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Surface Blumats Either an 8mm x 8mm elbow or an 8mm shut-off valve to put at the end of your supply line Components This Kit Contains: 40 1 Gallon Grassroots Sleeves (IG18466) 1 Complete 4'x8' Capillary Mat System (IG16964)

Read more less

This Kit includes: 1 Aquamat 4x8 Multilayer Capillary Mat Plain (IG17180) 1 Preset Blumat Tropf 5" (IG19079) 1 Blumat Tee - 8mm x 3mm - Individual (IG15653) 1 BluSoak Drip Tape End/Flush Plug (IG16065) 4 3mm Drip Tube for Blumat Systems (IG16021V) 4 8mm Super-Flex Tubing - Red (IG15634) 4 Blumat 8mm Elbows - Individual (IG15595)  

Read more less