Marketing: Published Products
Blumat Distributor Drippers (Ten) + 2m of Drip Tube - 4 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This comes with 4 packs. Each pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$77.46
$2.04
Perma-Loc 1/2" x 3/4" MHT End Cap
The Perma-Loc 1/2" x 3/4" MHT End Cap is a durable and reliable irrigation fitting designed to provide a secure and watertight seal. It features a 1/2" barb on one end, allowing for easy connection to a 1/2" irrigation tubing, and a 3/4" male hose thread (MHT) on the other end, providing compatibility with standard garden hoses or other fittings with a 3/4" female hose thread. The end cap is made from high-quality materials to ensure long-lasting performance and resistance to weathering and UV damage. It is an ideal choice for sealing off the end of a 1/2" irrigation line or for creating a watertight connection point.
$2.06
Blumat Pressure Reducer - 4 Pack
TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$204.12
Anti-Algae Biofilm Buster - Quart
A drinking-grade quality biofilm buster -- this uses oxygenated salt cluster ions to react with and disrupt the larger organic molecules like common biofilm. It's more effective than straight chlorine or hydrogen peroxide without the negative side-effects. And beyond keeping your Blumat lines clean and clear, it reduces root born disease, improves nutrient absorption, increases efficient plant growth, and eliminates algae and Pythium from roots. Has a chlorine base. Dilution ratio is 1:2000. Our Biofilm Buster goes 4x further than a comparable size of the other leading brands because it's more concentrated!
$50.76
Blusoak Plant Ring 30-90 Gallon
Description Traditional drip irrigation systems generally emit water in one or two places. This distributes moisture unevenly, hindering plant growth, and making sensors inaccurate. Blusoak plant rings even out the moisture creating consistent conditions for the Blumat sensors to monitor. The Blumat sensor gives you precise control over the moisture content in your container. You can easily change the moisture setting if you have temperature, humidity, or life cycle changes. All the components in this kit can function at very low pressure allowing for gravity systems as well as pressurized sources. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) Instructions for plant ring set up are here. To properly install the Blumat Sensor, see the Tropf Blumat Installation Guide here. Components This Kit Includes: 5’ of Blusoak 2.0 Drip Tape (IG18206) 3mm to Blusoak Tee (IG18838) 3’ of 3mm Drip Tube (IG16021) 1 Maxi 9” Blumat Sensor (IG14618) Blumat Protective Cap (IG15510) 3 BluSoak Stakes, Mega (IG16320) BluSoak to 8mm Barbed Adapter (AG15807)
$34.56
Amazon Purchase Orders Bulkhead Fitting 3/4" male hose x 1/2" FPT
Description Just a regular Bulkhead Fitting 3/4" male hose x 1/2" FPT Use to connect a large supply line into your reservoir. Great for gravity systems!
$7.00$6.30
BluSoak Drip Tape Tee
Description Join three lengths of Blu Carrot Soaker Hose together.
$1.30
Super Quiet Fan - Improve Air circulation, Move Heat or Cold Air Throughout Home
Evenly distribute the heat in your home by mounting this extremely quiet fan securely in a doorway, and push trapped warm air into an adjoining room. This is a great option for eliminating any “hot spots” near stoves and ceilings. Improve air circulation and heat up your home quickly. This 4 11/16" x 4 11/16", 50 CFM fan works great with passive solar heating systems and air conditioning systems as well. It has a 12 ft. power cord with an in-line switch. Hookup is a breeze with no wiring required. Measures 4 1/2" x 4 1/2". Finish is black with a chrome guard and it has a sound rating of 39 Db. *This fan has tested 3 times quieter than other comparable 50 CFM fans. This fan can also be used for moving cooler air throughout the home during the warm summer season. The Super Quiet® Fan moves an impressive 50 cubic feet of air per minute.
$73.44
Gravity System Timer
PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - This is an ideal timer for BluSoak and EasySoak Drip Tape systems! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries! Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems. Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s). Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes. This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output. This will work ideally with BluSoak and EasySoak Drip Tape watering systems.
$54.00
8mm Quick Connect Fittings w/ Stop/Plug
Description Quick Disconnect - Connect Fittings for Blumat 8mm supply tubing. An easy and inexpensive way to be able to connect/disconnect your main 3mm small Blumat tubing with just one quick rotation. Includes a quick connect female fitting, male fitting, and plug to connect to the male fittings so you can stop water from exiting the line. Buy an On/Off Valve to be able to turn off/on incoming water supply, valve sold separately (IG15936). Or buy the more expensive Professional Quick Connects for the quickest and most efficient way to disconnect your water line while being able to stop the flow of water from both input and/or output. This makes it easy to bring the cone "carrots" in during the winter.
$1.91
Blumat Classic Extend-A-Kit
Description Extend the reach of your Blumat sensors. Sometimes, it's best to have your water source further away from your plants than the 33" that comes with Blumat. This little kit offers 10 additional feet of tubing plus 2 coupling fittings and a tee fitting. The couplings allow you to extend your watering range and the tee allows you to water two separate plants from the same water line. Components This Kit Includes: 3mm Tubing (10 ft.) (IG15473V) 2x 3mm Couplings (IG15520) 3mm Tee (IG15581)
$15.00
Irrometer Pump Service Kit
Service Units are designed to aid users in the placement and installation, interpretation of readings, and maintenance of IRROMETER soil moisture indicators. Several helpful items are included in the kit. The primary component of a Service Unit is a small hand vacuum pump. The pump is designed to seal on the reservoir portion of the instrument body and is used to create a vacuum manually, evacuating any air contained in the tensiometer. These instruments function with the greatest accuracy when all air has been removed. One Service Unit will service multiple instruments. The Pump Service Unit is different in that it includes a pump with an integral vacuum gauge that registers in centibars (cb) or kilopascals (kPa). This is used to validate accuracy of the gauge on the IRROMETER being serviced. Click here for Irrometer's instruction manual.
$142.80
Blumat 15psi Pressure Reducer w/ Fittings for 1/4" Tubing to 8mm
This is a 15 Psi Blumat Pressure Reducer that has all of the fittings and adapters to allow you to fit this into 1/4" supply tube with 8mm on the output.Great for being able to get optimal pressure for your Blumat System, but can now be implemented into your existing 1/4" drip system so that you can get the optimal pressure from your own supply line, then lead into the 8mm tubing from that main line.
$57.24
8mm BULKHEAD / Through-Hull Tank Connector - 6 Pack
Description 6 Blumat Thru-Hull Tank Connectors to attach 8 mm Blumat water supply line to a rain barrel or water storage tank. This is your classic bulkhead fitting, made in Austria, high quality and efficient for a Blumat System. Bulkhead fittings allow you to penetrate through a wall or barrier, while allowing passage within the fitting. This allow you to tap into a tank of water, while allowing water to pass-through the bulkhead fitting, and into a water supply line. We have these pre-drilled into our 5-gal bucket reservoir, see related products below. Have your own reservoir? No problem, simply drill 1/2" holes into your own water tank and convert it into a Blumat Reservoir. We have even higher quality bullhead fittings, some that stop water flow when disconnected. Check out our bulkhead fittings category. *Reservoir not included, look into Blumat Reservoir or 5-gal bucket if you need a reservoir
$34.14
Blumat 3mm 4-way Cross
Description Make cross connections in 3mm line. You can use these to send distribution drippers in different directions rather than in a straight line. You can also use them as a more economical distribution method instead of using the drippers. Just cut equal lenghts of 3mm tubing and spread them around. This requires more maintenance because roots can grow into the tubing but it does save some dollars. This would be our "Economy" design suggestion. The "Mid-Range" version would use the drippers and the "Deluxe" suggestion would be to use more Blumat carrots. This is more expensive but gives you redundancy rather than having all the eggs in one basket.
$2.33
Excel Concept Holdings (HK) Ltd Auto fill Float Valve
A float valve that stays out of your way and doesn't so easily break or get stuck like the common ones. Instead of the arms like used in toilets, this has a float that goes up and down in a protected cylinder. When the water rises, it automatically turns off the input line. When the water gets used and the float goes down, it turns the water back on. Use with a gravity rainwater system to fill a reservoir during long times without rain, in gravity backyard systems, in tent grows, and any time you need to fill a reservoir without worrying when to turn the incoming water off — this will do that for you!
$12.96$11.66
Perma-Loc 1/2" to 8mm
1/2" tubing connector with 8mm barb connector. Adapts from 1/2" piping/tubing to 8mm Super-Flex.
$2.69
Shurflo High Flow 115v AC 3GPM Pump
The Shurflo pump model 2088-594-154 which is the higher flow model pump made by Shurflo. Warranty coverage provided by ShurFlo, best used with our 4-gal Pressure Tank This is the pump that comes standard in our High Flow Pump kits.
$174.96
Blumat 3mm mini-hose union
Description With the small Blumat kit and 12 carrots or with the XL kit and 40 in a pressure system, the 8 mm Blumat tubing works great. But when you start doing something much larger than that, you may want to start using 1/2" or 3/4" drip tube line. These 3 mm transfer barbs make it easy to do that. Just puch a small hole in your main line (see our Universal Hole Punch) and put one of these in between your Blumat 3 mm line and your main supply pipe. And if you really want to make it convenient, add the 3 mm Quick Connect or better still the 3 mm Quick Connect with auto stop.
$1.08
Blumat XL Gravity Kit - Automatic Watering Irrigation System for up to 40 Plants
This kit, like the more common Blumat XL pressure kit, is tuned for gravity-fed systems rather than a pressure system, which means it's also electricity-free. It does not include a pressure regulator, but it does come with 2 thru-hull adapters (for connecting to a reservoir), an on/off valve, and an extra Tee splitter. This way, you can easily incorporate the recommended loop method into your system (instructions included.) If you love plants, you'll love these Blumat kits. From a reservoir, this one will easily water two, 4'x8' raised beds or a large combination of plants in pots, planter boxes, or various landscaping. 40 Blumat sensors will ensure that your crops are properly watered - even when you're not home! Installation instructions Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. This kit includes forty 5" carrots and all the parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. PLEASE NOTE: This system does not include a water source. See our 5-gallon Reservoirs, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 40 Blumat Sensor Carrots (5") (IG17188) 15 Meters 8mm Water Supply Tubing (IG15634) 2 Bulkhead Fitting (8mm Thru-Hull) (IG15691) 2 Tees (8mm) (IG15653) 1 Elbow (8mm) (IG15595) 1 Reducing Tee (8x3x8mm) (IG15476) 2 End Pieces (3mm to 8mm elbow) ( IG15986) 1 Shut Off valve (IG15697)
$410.08
Water Level Indicator - For 55 Gallon Reservoir (3')
By far, the main trouble people have with gravity Blumat systems comes from forgetting to refill the reservoir and letting the carrots dry out. With this simple water level indicator installed, you can see with a quick glance how soon you'll need to refill. If you already have a 50 or 55-gallon drum, you can just add on the water level kit. Components This product includes: 3' 8mm Clear Flex Tube (IG18177) 1 Blumat 8mm Bulkhead (IG15691) 1 Blumat 8mm Tee (IG15581) 1 8mm Union (IG15638)
$13.80
BluSoak Drip Tape Elbow
Description Join two lengths of Blu Carrot Soaker Hose together at an elbow.
$1.08
Blumat System - Extension Kit
Description This kit is an add-on to other kits. An extension kit allows you to easily expand and customize your system to perfectly-fit your watering needs. Add on to your starter kit to create a more customizable and efficient system, great for when expanding a system! Components This Kit Includes: 10 Meters of Blumat Black Supply Line (32') 3 Blumat 8 mm Tee's (Hose Branch) (IG15597) 1 Blumat 8mm Elbow (IG15595) 1 Shut-off Valve (Fits Into 8mm Supply Line or Can Be Tee'd Off in a Closed Loop System) (IG15697)
$32.28
What Growers Are Saying
