Products

Display Blumats with the elegant light-weight rack.

Read more less

Display Blumats with the elegant light-weight rack.

Read more less

Description coming soon.

Read more less

Perfect for indoor or outdoor gardening. Simply choose your bed size, select your preferred trellis support option (none, s. ingle, or double layer), and add our BluMat irrigation option for precision moisture control.  Each bed features Grassroots' signature moisture-lock liner to prevent runoff and keep your soil evenly hydrated. All kits come with PVC fittings, just grab standard 1" PVC pipe to complete the frame. Need a custom size? We offer those too! Want more information? Link to Grassroots Raised Bed Guide here By choosing the Blumat Kit option you will receive our Preset 9' Blumat sensor and rows or our Blusoak drip tape to evenly distribute moisture across the bed of your choice. (Gravity reservoir/pump and supply not included)

Read more less

The highest quality fabric pots available, built specifically for living soil growing. Grassroots MoistureLock pots keep roots cooler, drain better, and air-prune more effectively than standard fabric or plastic pots. Key Features ＋ MoistureLock Technology — BPA-free waterproof inner lining prevents side-drying, simulating the way soil dries naturally from the bottom up Air pruning — 4" breathable fabric strip at the bottom promotes healthy root structure and prevents root circling Superior drainage — water moves downward through the soil, eliminating dry pockets Triple hem — reinforced top edge for added strength and durability Marine-bonded bottom seam — sewn on the outside to prevent rot Less surface area for water escape — lower water usage and lower indoor humidity Made in the USA from American-made geotextile fabric Size Guide ＋ 3 Gallon — 10" diameter x 8" tall 5 Gallon — 12" diameter x 9.5" tall 7 Gallon — 14" diameter x 10" tall 10 Gallon — 16" diameter x 12" tall 15 Gallon — 18" diameter x 14" tall 20 Gallon — 20" diameter x 15" tall 30 Gallon — 24" diameter x 16" tall 45 Gallon — 27" diameter x 18" tall 65 Gallon — 32" diameter x 18" tall 100 Gallon — 38" diameter x 20" tall 150 Gallon — 45" diameter x 22" tall 200 Gallon — 50" diameter x 24" tall

Read more less

This deluxe version of our Gravity Irrigation Kit ads 6 more XL Classics, a 12" rain screen for the top, an interior filter, and adapters for a total of 12 as well as a water level indicator that shows how much water is in your reservoir.  You can fill these with rainwater, the water that would normally go down the drain while you're waiting for it to get hot, from a pond, from a garden hose, or any good source. We designed this for a kind of simplicity that can make it extremely easy for people without much time, money, or mechanical skills. It's simple, complete, easy to set up, and inexpensive; but also, creates an easy way almost anyone can help keep more moisture in the ground, lower ambient air temperatures, prevent erosion, and keep the soil and plants more healthy. This represents only a small step in solving these environmental problems but it has solid benefits as well as providing a base learning curve for setting up larger systems in the future.

Read more less

Five gallon bucket w/level indicator and two bulkheads combined with our small supply line kit. Prefect for any 4'x4' or 5'x5' tent. This is the independent kit used in many of our complete kits.

Read more less

PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - This is an ideal timer for BluSoak and EasySoak Drip Tape systems! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries!   Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems. Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s). Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes. This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output. This will work ideally with BluSoak and EasySoak Drip Tape watering systems.

Read more less

PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - Fittings for 3/4", 1/2", and 8mm included! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries! Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems.Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s).  Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes.This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. Components The following fittings are included: IG15639 3/4" FHT x 1/2" FPT Swivel (IG15639) 3/4" Garden Hose Quick-Connect IG15716 1/2" MPT x 1/2" Barbed Insert (IG16263) IG15540 1/2" MPT x 8mm Barbed Insert (AG15807) This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output.This will work ideally with BluSoak and EasySoak Drip Tape watering systems.    

Read more less

Don’t get tangled up in netsHarvest faster and more efficiently with this innovative new system. You can hang your plants  immediately for better results while preserving flower quality. They also make tracking performance more accurate, and reduce the common damage from totes, nets, and over-handling. Instead of taking your crop to the drying hangers, you can take the hangers to your greenhouse, field, or grow room. Cut and hang your crop where it grows and you won’t have to touch your flowers again until they dry. An integrated handle lets one person carry a full stick of hangers while optimizing a consistent airflow. And when dry, you won’t believe how fast you can empty the hangers. Components This Kit Contains:  Adjustable Chains & Elevation-Bars (x2)  Tent-Stick Hanger Bar (x1)  The Right J-Hangers That Fit Your Kit (x5)

Read more less

Components Don’t get tangled up in netsHarvest faster and more efficiently with this innovative new system. You can hang your plants  immediately for better results while preserving flower quality. They also make tracking performance more accurate, and reduce the common damage from totes, nets, and over-handling. Instead of taking your crop to the drying hangers, you can take the hangers to your greenhouse, field, or grow room. Cut and hang your crop where it grows and you won’t have to touch your flowers again until they dry. An integrated handle lets one person carry a full stick of hangers while optimizing a consistent airflow. And when dry, you won’t believe how fast you can empty the hangers. Components This Kit Contains:  Adjustable Chains & Elevation-Bars (x2)  Tent-Stick Hanger Bar (x1)  The right J-Hangers that fit your kit (x5)

Read more less

High-Pressure BluSoak Drip Tape is a low-flow, emitter-style drip tape designed specifically for pressurized Blumat irrigation systems. With 6-inch emitter spacing, it delivers deep, even hydration and consistent wicking throughout the soil profile. ⚠️ Not compatible with gravity systems — requires 10–15 PSI to operate correctly. This is the tape we trust for consistent, high-performance Blumat irrigation. What Makes BluSoak Different BluSoak may look like standard drip tape, but performance comes down to flow rate and emitter spacing—and this tape was selected very intentionally. Low-flow output matched to Blumat sensor behavior 6-inch emitter spacing for continuous lateral wicking Even moisture distribution across beds and containers Designed specifically for pressurized Blumat systems After extensive testing, this is the only drip tape we’ve found that consistently performs the way a high-pressure Blumat system is meant to work. How It Performs When run at proper pressure, BluSoak delivers stable, predictable moisture across the entire root zone. Uniform hydration without dry spots No channeling or uneven watering Minimal runoff when properly set up Consistent performance across the full length of the tape This creates a balanced moisture environment that supports healthy roots and consistent plant growth. Pressure Requirements This tape is designed for pressurized systems only. Operating range: 10–15 PSI Ideal with 1-bar (15 PSI) or adjustable pressure reducers Works with pump systems or municipal water sources Gravity systems will not provide enough pressure for proper operation. Available Lengths 10 ft 20 ft 40 ft 100 ft rolls Installation Notes Cut through emitters, not between them. Cutting between emitters can disrupt spacing and lead to uneven or non-functional distribution. Always cut directly through an emitter to maintain proper performance. Ensure all Perma-Loc fittings are fully tightened. For best results, hold the black body of the fitting with pliers or channel-locks, then tighten the green collar by hand until snug. This typically provides an additional ¼ turn compared to hand-tightening alone. Even small leaks can reduce pressure and flow where it matters most, leading to inconsistent watering and reduced Blumat performance. Why Growers Choose BluSoak Clog-resistant design proven in commercial grows Consistent flow and spacing across the entire run Reliable performance under pressure Improved uniformity compared to standard drip tape Excellent value for both small and large systems

Read more less

The most durable, reliable, and easy-to-service drip tape system we've ever offered. Pairs a preset 9" Blumat sensor with ultra-low-flow, 6-inch emitter spacing drip tape for uniform moisture across beds and large containers — without runoff, dry spots, or constant tuning. ⚠️ Not compatible with gravity systems — requires 10–15 PSI to operate correctly. Kit Options ＋ Container / Small Bed Kit (up to 2×4) For 30–90 gallon containers or beds up to 2×4 Two straight runs across the bed Includes 10 ft BluSoak drip tape and all fittings 4×4 Bed Kit Four straight runs across the bed Includes 20 ft BluSoak drip tape and all fittings 4×8 Bed Kit Four straight runs across the bed Includes 40 ft BluSoak drip tape and all fittings What's Included ＋ Preset 9" Blumat sensor BluSoak 3.0 drip tape with 6-inch emitter spacing (length based on kit) 8mm SuperFlex header lines All required BluSoak fittings What You'll Also Need ＋ This kit covers everything inside the bed. To complete your system you'll also need an 8mm supply line and a pressurized water source: 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits. Pressurized Source (hose bib or pump) — requires a Pressure Reducer set to 10–15 PSI. Gravity systems will not work with this kit. Straight-Line Layout — Why It Matters ＋ Header-fed straight runs instead of a single woven piece makes a major difference between cycles: Lift the system out, amend your soil, drop it back in Easy reinstall without rebuilding Clean, modular layout with consistent pressure distribution Less frustration when turning over beds between runs What Makes BluSoak Different ＋ Lowest flow rate compatible with Blumat control 6-inch emitter spacing for continuous lateral wicking Uniform moisture distribution across the entire bed Thin-wall construction for easy cutting and installation The only tape we've found that consistently performs with pressurized Blumat systems Frequently Asked Questions ＋ Can I use this with a gravity system?No. These kits require 10–15 PSI and are designed for pressurized systems only. Why use straight lines instead of a woven layout?Straight-line layouts are modular and easy to remove, making them ideal for growers who re-amend soil between cycles. What makes this better than standard drip tape?Lower flow rate and tighter emitter spacing allow for even moisture distribution and proper compatibility with Blumat sensors. Do I need a pump?Yes, if running from a reservoir. A pressurized source is required.

Read more less

Introducing our Hobby Grow Living Soil Raised Bed—the perfect solution for small-scale gardening enthusiasts! Designed specifically for hobby customers, this raised bed is the only size we currently offer as a complete package, including all necessary PVC components. Product Details Dimensions: 19” x 19” x 18” Download the Assembly Instructions Watch the Assembly Video Key Features The Hobby size Living soil raised bed is made so you can fit two units' side by side in one two-by-four grow tent and have extra room on each side. Soil Capacity: When filled to the top, this bed holds 28.13 gallons (or 3.7 cubic ft). New Pipe Caps Included: These caps are used when you don't have a trellis system installed. These caps are included to prevent bugs, pests, or soil from entering the internal frame of the raised bed. (Note: Not used for the ends of the legs; they will not fit.) Innovative Liner: Includes our revolutionary living soil liner Emulate Nature with MoistureLock™ Technology, designed to replicate natural soil drainage and help maintain positive soil moisture levels. This new size allows for the highest soil capacity possible for a two-by-four tent without sacrificing environmental airflow or humidity issues.

Read more less

Description Use to secure connection points on 3mm and 8mm fittings. Snaps into place.

Read more less

3/4" male hose thread x 3/4" male hose thread. This filter will remove physical particulates and debris prior to entering your irrigation line. Great for drip emitters.

Read more less

An easy way to check pressure on long tape or tubing lines. Just use use this on end of a tape line, a water supply line, even on to a faucet. The thread is standard 3/4" hose thread. With several of these and our quick connect pressure gauge connectors (IG17692 or IG17691), you only need one meter and can still quickly check multiple lines. Contains: 3/4" Hose Thread Cap w/ Washer Schrader Valve Single

Read more less

Need some automated houseplant watering support but not sure how to start? To get exactly what you want, start with this foundation kit and add on Classics based on number and size of your plants, the type of water container, and any other options you might need.For our complete version see IG18665.This starter kit includes a bulkhead fitting that will connect with the water reservoir of your choice. All that's needed is a 1/2" (12mm) borehole.

Read more less

Automatically water multiple houseplants from one container and one water line. When at home or on vacation, your plants will thrive. This complete kit has everything you need for 3 plants and you can easily add parts for more plants later.The Inline Blumat Classics maintain ideal moisture levels for your plants automatically. Super-Flex Tubing connects the plants to your water container and the Shut-off Valve creates a stop at the end of the line. Any place you need watering,For each plant, just cut the line with scissors and push the Classic into your potting mix. You can change the amount of water supplied by raising or lowering the jar.

Read more less

Our indoor kit features six Blumat stakes. These Blumats ensure a constant supply of water to your indoor plants. They automatically supply just the right amount -never too much or too little. Your plants won't experience any drying out that stunts growth or over-watering that squeezes the air out of the soil and keeps plants from "breathing" properly. As the soil dries, a ceramic cone gradually delivers water into the surrounding dirt, which creates a vacuum within the cone that draws water from a nearby container of water. And once the soil reaches a desired moisture level, the Blumat will stop pulling in water. You can even add fertilizer to the water supply — slow, continual feeding encourages prolific plant growth. Vacation without worrying about watering your plants. Just fill up a container with enough water to last your plants while you're gone - Blumat will do the rest! No need to re-pot, move your plants, or hire a plant sitter. Great while you're at home, too! Simply fill a water container, connect your Blumat, and take care of many different plants and plant types at the same time! Easy and simple to set up Plants grow healthier and faster Slow and steady watering allows water to warm up before going into the soil, eliminating the worry of shocking your plants. Blumat stakes will only draw water up 12 inches (30cm). Be sure to place your water supply within this range. If the surface of the water in your container is lower than this, the flow of water will be restricted and your plants will gradually dry out. Each Blumat holds a limit on how fast it can deliver water. Use several cones or a Blumat Classic XL for larger plants with higher water needs. In this case, also be sure to use a larger water reservoir. With the included Extend-a-Kit, you can expand the reach of your Blumat stakes. Regarding plant health, sometimes it's best to have your water source further than the 33" that comes with the Blumat. This little kit gives you 10 extra feet of 8mm tubing plus 2 couplings, a T-splitter and a Y-splitter adapter. The couplings allow you extend your watering range and the T- and Y-splitters let you water 2 plants from a single water line. Guide to the Blumat Classic Components This Kit Includes: 4 Blumat Classic Stakes (IG15693) 2 Blumat Classic XL Stakes (IG16897) 1 Blumat Extend-A-Kit (IG14610) 1 3mm Y Connect Adapter (BM15502)

Read more less

Description 2" 120 Mesh Disk FilterSize: 2" XLMesh: 120 Mesh Disks

Read more less

Adapts from a layflat hose into a fitting for 5/8", ideal for our BluSoak 2.0 Drip Tape. Valve included in adapter.

Read more less