Products

DescriptionThis kit provides an easy, fast, and water-saving way to water traditional small sized bonsai pots. No timers, batteries, or electricity required! This system uses a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your bonsai medium. It also has 4 additional distribution drippers that  spread water out across different areas on the surface of the pot. And it has  a quick-connect with valve to make it  easy and fast to move plants when the weather changes, you want to change the amount of light they receive, to prune or display somewhere else.Water source/reservoir needs to be above the garden for a gravity system. For a pressure system you will need a faucet or garden hose and a Blumat Pressure Reducer.

Read more less

This kit provides an easy, fast, and water-saving way to water a medium or larger size bonsai pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your bonsai medium. On top of this, there are 6 additional distribution drippers in order to spread water out across different areas on the surface of the pot. This kit also comes with a quick connect with valve for easy moving of plants for pruning, sun, etc. Water source/reservoir needs to be above the garden for a gravity system. For a pressure system you will need a faucet or garden hose and a Blumat Pressure Reducer.

Read more less

Easily convert a used plastic bottle to a Blumat supply source. This works really well for hanging plants - both inside and outside. Just attach the plastic bottle to the hanger and put the Blumat in the soil. You can cut the bottom off the plastic bottle (you can use these cut off bottoms to make plant holders that keep wooden shelves from getting rings) and fill them from the top. If you prefer to keep the bottle intact, the water will last longer and you don't have to worry about insects getting in it but it's harder to fill. If you use the auto-stop version of this bottle cap though (IG15525), you can more easily move the bottle to fill and put back without spilling the water all over. This uses the thread type common on most one liter plastic bottles - not the same as 3/4" hose thread.

Read more less

Using a plastic saucer or tray to contain soil media, plant a new clone or seedling in the sleeve. When the rooted plant has filled the sleeve with roots, then place the rooted clone or seedling on top of a living soil bed system for the life of the plant. After harvest is complete, leave the old sleeve and place the next plant right next the first. When the old roots system is gone, you can remove the old sleeve and re-plant in the original location. Here is a link to Steve Cantwell full breakdown of bottomless pots tech Watch video Download more info about our One-gallon Bottomless pots

Read more less

Description This is a Brass version of the regular plastic Bulkhead Fitting 3/4" male hose x 1/2" FPT we normally recommend, but some people may prefer metal over plastic.

Read more less

This classic looking solid metal mister, sprays water in fine and small amounts, while being aesthetically-pleasing and pragmatic. The spray is great for keeping plants clean from dust, for increasing humidity, or even for spraying fertilizer if needed. The comfortable handle makes daily misting easy. Some of the best sprayers are those that can live in close proximity to the plants for convenient regular misting. For that, the mister needs to look nice enough for display like this model. With its stainless steel and polished copper finish, this metal spray mister holds its own next to a prized orchid or bonsai tree. The 10-ounce spray mister comes in copper, brass, or nickel. Details Materials Metal Plastic Rubber Dimensions Weight: 0.3 lb. Total height: 6" Diameter: 3.5" Volume: 10 fl. oz. Plant Mister Instructions: To use the metal mister, fill with water, hold the small loop handle with the fingers then depress the top with the thumb to release a fine mist. Video

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system! These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system!   These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system! These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system!   These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system!   These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system! These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

Read more less

Description 3/4" Bulkhead Fitting

Read more less

Description Just a regular Bulkhead Fitting 3/4" male hose x 1/2" FPT Use to connect a large supply line into your reservoir. Great for gravity systems!

Read more less

Bulkhead Fitting 3/4" male hose x 1/2" FPT that also comes with the fitting to allow you to connect to a 1/2" line, thanks to 1/2" insert and clamp. Use to connect a large supply line into your reservoir. Great for gravity systems!

Read more less

Description A bulkhead fitting connector to a SwingPipe (funny pipe, slightly smaller than 1/2" poly pipe). We use this for our pump system connecting pipe.

Read more less

Description Industrial Grade. Electric blue trim. Bona Fide Blumat tech.

Read more less

Description This is a 10 pack of caps for capping off distribution drippers or 3mm barbs.

Read more less

Use with Capillary Mats outside on the ground, when you're making your own with the parts and indoor when you frequently need to walk on it. With better permeability than woven geotextiles, this non-woven, polypropylene version protects better and lasts longer than most alternatives. Comes in rolls 5.75' wide by 98' long.  

Read more less

Use with Capillary Mats outside on the ground, when you're making your own with the parts and indoor when you frequently need to walk on it. With better permeability than woven geotextiles, this non-woven, polypropylene version protects better and lasts longer than most alternatives.

Read more less

Description Use this capillary mat in the center with a top or perforated foil on the top and some regular plastic sheeting under it. Cut to any size, quickly make  4x8, 4x10, or 4x5' sets. In trays under houseplants it evens out the moisture and encourages roots to grow down instad in a spiral. In seed starting trays it helps keep the seeds and seedlings from getting either to dry to to wet. You can supply the water manually, with a Surface Blumat, or with a preset Blumat in one of the pots on the mat. specs • Lightweight, high-strength, polypropylene, polyester, viscose material •  Resists rotting, shrinking, chemical decomposition and being crushed • Reversible and will not fray after cutting • Highly absorbent, permits water to quickly wick to roots • Mat thickness is 1.0 mm • Capillary lift is 8.0 cm

Read more less