BEAT THE HEAT SUMMER SALE

• 5" Sensor — Best for small pots, shallow containers, capillary mat-style setups, or situations where you specifically want shallower moisture sensing.
• 9" Sensor — Recommended for containers over 6" deep . The 9" sensor depth is adjustable, so it does not need to be buried all the way down. It gives more flexibility for larger containers, deeper root zones while still allowing you to place the ceramic cone at the moisture-sensing depth you want.

• Standard — Ships as-is from Blumat. You dial in the moisture level yourself. Includes 6" of 3mm tubing (5" sensor) or 2 ft (9" sensor).
• Preset — Pre-calibrated at the factory for most soil and potting mix types. Just insert and go. Includes locking adjustment cap, 3mm union, adjustment key, and extra 2 ft of 3mm tubing.

• None (1–5 gal) — Sensor waters directly at the insertion point. Best for small pots.
• 5" Drip Ring (2–7 gal) — 4 drip points, pre-assembled.
• 3-Dripper Setup (5–20 gal) — 3 drippers with stakes and 3mm tubing.
• 10" Drip Ring (10–20 gal) — 8 drip points, pre-assembled.
• 5-Dripper Setup (10–30 gal) — 5 drippers with stakes and 3mm tubing.
• BluSoak Tape Loop (30–90 gal) — Single loop for even coverage around large containers.
• BluSoak Tape Double Spiral (30–90 gal) — Spiral from center outward for maximum coverage.
• BluSoak Tape Triple Spiral (100–200 gal) — Largest spiral layout for very big pots and beds.

• 1 Blumat sensor (5" or 9" based on selection)
• 3mm drip tubing (6" or 2 ft based on sensor size)
• Distribution components based on selection (drip ring, drippers, or BluSoak tape)
• Preset upgrade includes: locking adjustment cap, 3mm union, adjustment key, extra tubing

This kit covers everything at the pot. To complete your system you’ll also need an 8mm supply line and a water source:

• 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits.
• Gravity Reservoir — our complete 5-Gallon Deluxe Bucket Kit comes pre-drilled and ready to connect, or grab our 8mm Bulkhead Fittings and use any container of your choosing.
• Pressurized Source (hose bib or pump) — if connecting to a hose bib or pump instead of a gravity reservoir, you’ll need a Pressure Reducer to bring the pressure down to the safe Blumat operating range of 7–15 PSI.

The Blumat sensor is a ceramic cone that reads soil moisture. As the soil dries, a vacuum builds inside the cone and pulls water through the drip line. When moisture is restored, the valve closes automatically.

Connect your sensor to any 8mm Blumat supply line running from a gravity reservoir or pressurized source. No programming, no timers, no electricity required.

• 2 Row (2×4 ft) — Two rows of BluSoak drip tape
• 3 Row (3×3 ft) — Three rows of BluSoak drip tape
• 3 Row (3×6 ft) — Three rows of BluSoak drip tape
• 4 Row (4×4 ft) — Four rows of BluSoak drip tape
• 4 Row (4×8 ft) — Four rows of BluSoak drip tape

• 5" Sensor — Senses moisture at the surface. Best for beds 8" deep or less with shallow-rooted crops.
• 9" Sensor — Adjustable to depths up to 9". Better for deeper beds and more dynamic moisture control.
• 5" + 9" Dual Sensor — Two sensing depths working in tandem for the most precise moisture response.

• Standard — Ships as-is from Blumat. You dial in moisture yourself. Includes 6" of 3mm tubing (5" sensor) or 2 ft (9" sensor).
• Preset — Pre-calibrated at the factory. Just insert and go. Includes locking adjustment cap, 3mm union, and adjustment key.

• Blumat sensor(s) based on selection
• BluSoak drip tape rows sized to your bed
• All BluSoak fittings and adapters
• 3mm drip tubing
• Preset upgrade includes: locking cap, 3mm union, adjustment key

This kit covers everything inside the bed. To complete your system you'll also need an 8mm supply line and a water source:

• 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits.
• Gravity Reservoir — our complete 5-Gallon Deluxe Bucket Kit, or use our 8mm Bulkhead Fittings with any container of your choosing.
• Pressurized Source (hose bib or pump) — requires a Pressure Reducer to bring pressure down to the safe Blumat range of 7–15 PSI.

The Blumat sensor reads soil moisture and controls water flow through the BluSoak drip tape. As the bed dries, the sensor opens and water flows. When moisture is restored, it closes automatically.

No timers, no electricity, no programming. Works with both gravity and pressurized water sources.

• 2×4 ft
• 3×3 ft
• 4×4 ft
• 4×8 ft

• Preset 5" Blumat Sensor — Placed into a pilot container filled with soil, this sensor regulates water flow into the mat based on soil moisture levels. Best suited for pots 4" or larger.
• Surface-Mounted Blumat — A bell-shaped ceramic base that attaches to a Blumat sensor and sits directly on the mat. Fine-tune moisture levels for uniform watering across the surface. Ideal for cell trays or small containers.
• No Sensor — For manual watering. No fittings included.

• Grassroots 1-Gallon Bottomless Sleeves — Maximize aeration and allow roots to grow through the open base into the mat. Ideal for easy transplanting. (10 for 2×4, 20 for 3×3 or 4×4, 40 for 4×8)
• Non-Woven Nursery Pots — Biodegradable, tear-resistant fabric bags that allow roots to grow through the sides and bottom for easy transplanting. (50 with any mat size)
• None — Use your own containers. Any pot with holes flush to the bottom will work.

This kit covers the mat and containers. To complete your system you'll also need an 8mm supply line and a water source:

• 8mm Supply Line — runs from your water source to the sensor. See our 8mm SuperFlex Supply Line Kits.
• Gravity Reservoir — our complete 5-Gallon Deluxe Bucket Kit, or use our 8mm Bulkhead Fittings with any container of your choosing.
• Pressurized Source (hose bib or pump) — requires a Pressure Reducer to bring pressure down to the safe Blumat range of 7–15 PSI.

• 25 ft, 50 ft, or 100 ft of 8mm SuperFlex tubing
• 4 × 8mm Tees
• 3 × 8mm Shut-Off Valves

• 25 ft kit — up to 25 square feet
• 50 ft kit — up to 50 square feet
• 100 ft kit — up to 100 square feet