Blumat 12 Sensor Drip Irrigation Kit - Gravity Deluxe with 5 Gallon Reservoir
Blumat 12 Sensor Drip Irrigation Kit - Gravity Deluxe with 5 Gallon Reservoir
Increase yields, decrease grow times, save time, money, and water
Free pickup in our shop(s)
SKU: IG15615
Barcode: 726670461926
$188.00
- Description
- How it works
- Components
A gravity-fed Blumat drip irrigation kit for up to 12 potted plants or a growing area of up to 3.5 square meters. It includes twelve 5-inch Tropf Blumat sensors, a 5-gallon reservoir with installed bulkhead fittings, and a water-level indicator. The gravity-fed system operates without electricity.
Choose the right sensor size
The included 5-inch sensors are intended for smaller potted plants, up to 10-gallon pots. For larger plants in pots of 10 gallons or more, we recommend 9-inch Maxi sensors to reach deeper into the soil. Contact us if you are choosing between sensor sizes.
Reservoir and installation
Perfect for landscapers and home gardeners. It is easily installed with a pair of scissors and connects directly to your reservoir. This kit includes twelve, 5” carrots and all the parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level.
The reservoir is included, but you need a suitable location to elevate it. Review the water-source and indoor-use guidance below before installation.
Water-source requirements
PLEASE NOTE: This Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. Let us know if we can help you select the right products for your custom irrigation system!
Indoor-use warning
Note: Blumat Classics (Juniors) and bottle adapters are designed for houseplants while Tropf-Blumat Sensors (the one's with the small adjustable brown knob on top) are designed for greenhouses, growrooms, decks, and outside gardens. Blumats Austria says "Please don't use the Tropf-Blumats indoors" because if hooked up to a constant water source and a pet, guest, or user-error somehow causes a run-away, it could damage an indoor floor, drywall, carpet, or furniture. We, and many others, do in fact use these systems inside ourselves, however, we are generally around enough that if a problem did occur, we would be able to notice a problem and fix it in time (not the case if someone is on vacation). We have many guides for being able to set these up the proper way and avoid a run-away or general mistakes. Please contact us for any help, we are always here to help make your life easier.
As the soil dries, changes in pressure inside each Tropf Blumat sensor open its valve and allow water to flow from the supply line. When the soil is sufficiently moist, the valve closes. Each sensor responds to moisture where it is installed rather than following a fixed watering schedule.
Each standard sensor covers an area approximately 12 inches in diameter. Additional supply hose, sensors and distributor drippers can be used to customize the layout.
This kit includes:
- 2 - Blumat Tees - 8mm x 3mm x 8mm
- 1 - Blumat 8mm Tee
- 1 - Classic Pipette
- 1 - Blumat 8mm shut Off Valve
- 25 ft Red 8mm Super-Flex tubing
- 1 - Blumat Medium Box Kit
- 1 - Blumat Water Reservoir 5 Gallon Bucket with Bulkhead fittings
- 1 - Water level indicator for 5 gallon bucket
The kit contains twelve 5-inch sensors, supplied as part of the Blumat Medium Box Kit listed above. A pressure reducer is not included.

