Products

These passive irrigation emitters deliver water directly to your containers based on soil moisture — no electricity, timers, or pumps required. Designed to be used with 8mm supply tubing and a reservoir, each unit uses soil tension and capillary action to draw water only when it’s needed, helping maintain consistently healthy moisture levels for your plants. As the soil around the ceramic cone dries, it pulls moisture out of the cone. This creates a suction effect that draws water from a connected reservoir through the 8mm tubing, rehydrating the cone and surrounding soil. When the soil is moist, the flow slows or stops entirely. Water Output: ~50–150 ml per 24 hours (varies with reservoir height and soil dryness) Recommended For: Pots up to 10" in diameter For Larger Pots: Use multiple sensors for even coverage Each unit connects inline to your reservoir with our 8mm supply line using the included T-connector and operates independently based on local soil moisture. Reservoirs can be placed at the same level as your containers or elevated to increase flow. The higher the reservoir, the more water is released.

Read more less

These passive irrigation emitters deliver water directly to your containers based on soil moisture — no electricity, timers, or pumps required. Designed to be used with 8mm supply tubing and a reservoir, each unit uses soil tension and capillary action to draw water only when it’s needed, helping maintain consistently healthy moisture levels for your plants. As the soil dries out, it pulls moisture from the ceramic cone, which in turn draws water from your reservoir through 8mm tubing. When the soil is moist, the flow naturally slows or stops. Water Output: ~75–200 ml per 24 hours (varies with reservoir height and soil dryness) Recommended For: Pots between 10"–15" in diameter For Larger Pots: Use multiple sensors for even coverage Each unit connects inline to an 8mm supply line using the included T-connector and functions independently in response to local soil conditions. Reservoirs can sit level with your containers or be elevated to increase flow. Raising the reservoir increases water output.

Read more less

These passive irrigation emitters deliver water directly to your containers based on soil moisture — no electricity, timers, or pumps required. Designed to be used with 8mm supply tubing and a reservoir, each unit uses soil tension and capillary action to draw water only when it’s needed, helping maintain consistently healthy moisture levels for your plants. As the soil dries out, it pulls moisture from the ceramic cone, which in turn draws water from your reservoir through 8mm tubing. When the soil is moist, the flow naturally slows or stops. Blumat Inline Classic Water Output: ~50–150 ml per 24 hours Recommended For: Pots up to 10" diameter Blumat Inline Classic XL Water Output: ~75–200 ml per 24 hours Recommended For: Pots between 10"–15" diameter For Larger Pots: Use multiple sensors for even coverage Each unit connects to the reservoir inline with our 8mm supply line using the included T-connector and functions independently based on local soil moisture. Reservoirs can sit level with your containers or be elevated to increase flow. Raising the reservoir increases water output.

Read more less

Components This Kit Includes: 1 - Plastic Case w/ 35 Compartments 10 - Blumat 8mm Tees (IG15581) 10 - Blumat 8mm Elbows (IG15595) 10 - Blumat Hose Unions (IG15638) 5 - End Piece for 8mm Supply Line - 8mm x 3mm Elbow Adapter (IG15564) 10 - Blumat Tee - 8mm x 3mm x 8mm (IG15476) 20 - Blumat Distribution Drippers (IG15558) 5 - Blumat Distribution Drippers - End Piece IG15558 20 - Blumat Support Stakes IG15591 25 - Blumat 3mm Mini-Hose Union (IG15520) 10 - Blumat 3mm Y Connector (BM15502) 20 - Blumat Stops, Sealing Caps (IG15509) 5 - 8mm Press-In Plugs (IG15696) 5 - Blumat Quick Connect Shut-Off Valve (only Valve) (IG15936) 5 - Blumat Adapter - 3mm to 1/4" (IG16085) 15 - Tubing Clamps - 8mm & 1/4" (IG15853) 2 - Blumat Adapter - 8mm tubing to 1/2" Pipe Thread (IG16014) 2 - 8mm Bulkhead / Through-Hull Tank Connector (IG15691) 3 - Blumat 8mm Shut-Off Valve (IG15697) 1 - Blumat Watering Head (IG15559) 1 - 3/4" Female Hose Thread (FHT) to 8mm Barbed Insert - Garden Hose Adapter (IG16721) 1 - Plastic Pipette (IG15651) 15 - BluSoak Stakes Long - Mega (IG16726) 20 - Blumat Protective Cap (IG15510) 1 - Replacement Brown Cap for Tropf Blumat Sensor (IG16150) 5 - Male Luer Integral Lock Ring to 200 Series Barb, 3/32" (2.4 mm) ID Tubing, White Nylon 5 - Female Luer Thread Style to 200 Series Barb, 3/32" (2.4 mm) ID Tubing 5 - Female Luer Thread Style to 250 Series Barb, 3/16" (4.8 mm) ID Tubing 5 - Male Luer Thread Style to 200 Series Barb, 3/16" (4.8 mm) ID Tubing, blue nylon 5 - Male Luer Integral Lock Ring to 400 Series Barb, .170" (4.3 mm) ID Tubing, 1/4" black 5 - Female Luer Thread Style to 250 Series Barb, 3/16" (4.8 mm) ID Tubing

Read more less

Product Description: Fully customizable with every option we recommend for watering individual pots. Use this page to create the exact kit you need, whether you're irrigating small 1-gallon containers or 200-gallon living soil pot. 1. Distribution Method Options: Choose how you want water distributed around each pot. None (1-5 gal) – No distribution; recommended only for small pots 3-Dripper Setup (5-20 gal)– 3 drippers with stakes, connected by 3mm tubing 5-Dripper Setup (10-30 gal) – 5 drippers with stakes, connected by 3mm tubing 5" Drip Ring (2-7 gal) – 4 drip points; pre-assembled 10" Drip Ring (10-20 gal) – 8 drip points; pre-assembled BluSoak Plant Ring (30-90 gal) – Single loop for 30–90 gallon pots BluSoak Spiral (30–90 gal) – Spiral layout from center outward BluSoak Spiral (100–200 gal) – Larger spiral for big pots and beds 2. Sensor Type:  Choose between a 5-inch or 9-inch Blumat sensor depending on your desired sensing depth. 5-inch Sensor – Senses moisture at the soil surface. Perfect for small containers or crops with shallow root systems (<6"). 9-inch Sensor – Adjustable to depths up to 9 inches. Senses moisture deeper into the container for more dynamic moisture control.  3. Calibration Type: Decide between the Standard sensor or the upgraded Preset sensor. Standard – Includes 6" of 3mm tubing (5" sensor) or 2 ft (9" sensor); ships as it comes from Blumat Preset – Pre-calibrated and marked for gravity or pressure setups; includes locking adjustment cap, 3mm union, adjustment key, and extra 2 ft of 3mm tubing (for 5" sensor) The Preset option offers more than just pre-calibration—it gives you added flexibility, control, and extra parts to customize your install.

Read more less

Product Description: Use this page to create the exact kit you need. Fully customizable with every option we recommend for irrigating raised beds. Choose a single kit for a small bed or multiple kits to cover any size area.  1. Distribution Method Options: Choose a BluSoak layout that matches your bed dimensions. 2 Row (2×4 ft) – Two rows of BluSoak drip tape 3 Row (3×3 ft) – Three rows of BluSoak drip tape 3 Row (3×6 ft) – Three rows of BluSoak drip tape 4 Row (4×4 ft) – Four rows of BluSoak drip tape 4 Row (4×8 ft) – Four rows of BluSoak drip tape BluSoak provides even, low-pressure watering and works great with both gravity-fed and pressurized systems. 2. Sensor Type:  Choose a single sensor or dual-sensor setup for your desired moisture control. 5-inch Sensor – Senses moisture at the soil surface. Perfect for beds with shallow-rooted crops (8" deep or less). 9-inch Sensor – Adjustable to depths up to 9 inches. Senses moisture deeper into the soil for more dynamic moisture control. 5-inch + 9-inch Sensors – Dual-depth control. Sensors work in tandem for the most precise and adjustable moisture response. 3. Calibration Type: Decide between the Standard sensor or the upgraded Preset sensor. Standard – Includes 6" of 3mm tubing (5" sensor) or 2 ft (9" sensor); ships as it comes from Blumat Preset – Pre-calibrated and marked for gravity or pressure setups; includes locking adjustment cap, 3mm union, and adjustment key.

Read more less

Description Get started using Blumats with our simple, low-cost Starter Kit. If you only have a few plants or you'd like to learn how Blumats work before converting over to a larger system, this kit is just right for you. This kit is made for a gravity-fed system (does not include fittings to attach to a hose bib or pressure system). Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Our starter kits are perfect for landscapers and home gardeners. They're easily installed with a pair of scissors and connect directly to your hose, tap, or rain barrel with the help of the Pressure Reducer. Includes ten 5” carrots and all parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. An optional Pressure Regulator attached to garden hose or faucet can provide enough water for up to 500 Blumat Carrots (See 'Related Products'). If your reservoir does not have a thru-hull installed, you will have to drill a hole into your reservoir bucket and install a thru-hull piece. For our customers' convenience, we also sell 5-gallon reservoirs with thru-hulls already installed. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. The Tropf Blumat system remain suitable for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand your system to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. This system does not include a water source. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 10 Blumat Carrots (5") (IG17188) 1 Thru-The-Hull Adapter for Attaching to a Reservoir (Reservoir Not Included) (IG16901) 1 3mm-to-8mm End Piece (IG15986) 7 meters of 8mm Blumat Tubing (IG15634) (See related products for a 5-Gallon Water Reservoir and optional Pressure Reducer, which are not included in this kit, but may be required to set up a complete and functioning system.) 

Read more less

Description Perfect for landscapers and home gardeners. An included pressure reducer allows for you to simply connect your system to a home faucet or garden hose. This system can also be expanded to fit your specific irrigation needs up to 500 distribution drippers! This kit will easily water two 4'x8' raised beds or a large combination of plants in pots, planter boxes, landscaping, or in rows. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients and still ensure healthier, more potent, and faster-growing crops. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat system are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. If you want to use a reservoir, see 5-gallon Reservoirs below sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently , but extra costs may apply. Components This Kit Includes: 2 - Blumat 8mm Shut-Off Valve (IG16893) 2 - Blumat Quick Connect / Disconnect for 8mm Supply Tubing - No Water Stop (IG15524) 8 - Blumat 8mm Tees (IG15653) 10 - Blumat 8mm Elbows (IG15595) 16 - Tropf Blumat 5" Sensor (IG14607) 40 ft - 3mm Drip Tubing (IG16021V) 32.8 ft - 8mm Water Supply Tube for Blumats (IG15470) 32 - Blumat Distribution Drippers (IG15557) 8 - Blumat Distribution Drippers - End Piece (IG15558) 1 - Plastic Pipette (IG15651) 2 - Blumat Quick Connect Shut-Off Valve (Only Valve) (IG15936) 1 - Blumat Standard Pressure Reducer 1bar (15psi) (IG14606) 6 - Blumat Stops, Sealing Caps (IG15509) 3 - Blumat 3mm Tees (IG15581) 3 - Blumat 3mm Y Connector (BM15502) 3 - Blumat 3mm Mini-Hose Union (IG15520)

Read more less

Description These kits water up to six plants or a 3 square yard garden. Blumat systems can adjust to any plant type or desired moisture level. This specific kit comes with 9" carrots, or Maxis, which are designed for large plants (those in 15+ gallon pots) to get water deep into the soil. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners, you can easily install with a pair of scissors! It can directly connect to your reservoir or rain barrel or, with a pressure reducer, to a conventional watering system's hose or faucet. This kit includes six, 9" carrots (Maxis) and all parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. An optional Pressure Reducer attached to garden hose or faucet can provide enough water for up to 500 Blumat Carrots (See 'Related Products'). If your reservoir does not have a thru-hull installed, you will have to drill a hole into your reservoir bucket and install a thru-hull piece. For our customers' convenience, we also sell 5-gallon reservoirs with thru-hulls already installed. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. This system does not include a water source. See our 5-gallon Reservoirs here, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 6 Blumat Maxi carrots (9") (IG16341) 7 meters (23 Feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Elbow Splitter (IG15595) 1 Blumat Hose Union (IG15638) 1 Blumat End-Piece (IG15986) 1 Blumat Reducing Tee (IG15476) 1 Rain Barrel/Gravity Tank Connector (Blumat Thru-Hull Tank Connector) and Installation Instructions (IG15691)

Read more less

Description When making a hole for a Blumat sensor, most garden trowels and tools will make too big of a hole. This one - designed for specifically doing just that - is only 1" wide (11"+ long) and makes that job easy while disrupting roots as little as possible. Also great for any planting job when you want to make a small hole or dig out weeds while disrupting the soil as little as possible.

Read more less

Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians!   Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.

Read more less

Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians!   Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.

Read more less

Description True reducer - Not a mere flow controller, this brings water pressure down to 7.25 psi (0.5 bar)! Easy to install - Screws onto standard hose thread (3/4" input), and outputs to 8mm tubing! Enduring - Made from ABS plastic and designed with few points of failure, this is built to last! Blumat ready - Designed specifically for Blumat water systems and 8mm tubing, no tools necessary! Austria-engineered - This is high-quality component and is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from a normal house water connections. The Blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. Beware imposters! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates do not necessarily correlate to reduced pressure. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87 psi) down to 7.25i (0.5 bar) output. This is ideally suited and low enough for Blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4") hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with Tropf Blumats. This adaptation makes setting up a Blumat system from a hose or pressurized line an absolute breeze, and you can install blumats in seconds. Blumat systems need low pressure, much less than comes from a normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to a Blumat 8mm supply tube. Maximum input pressure is 87 psi.

Read more less

DescriptionThe standard Blumat pressure reducers work great for most systems. But for larger systems that need a higher flow rate, this becomes a better choice. This also works better when there's a long distance between the pressure reducer and your plants.A TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4"" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 15 psi (1 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference."3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 15 psi maxA TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 15 psi (1 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference.3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 15 psi max

Read more less

DescriptionLike our standard Blumat Pressure Reducer but with 3/4"" hose thread output!The standard Blumat pressure reducers work great for most systems. But for larger systems that need a higher flow rate, this becomes a better choice. This also works better when there's a long distance between the pressure reducer and your plants.A TRUE REDUCER - Not just a flow controller that only works with high flows, these reduce pressure in Blumat systems with extremely low flow ratesEASY TO INSTALL - Uses standard 3/4"" hose thread for both input and ouput sidesHIGH QUALITY - Built to last from ABS plastic and designed for longest life Blumat systems need constant low pressure — much less than municipal home and farm pressure. These reducers insure a constant pressure.Often, people call flow restrictors "pressure reducers" and they can reduce pressure — but only if the system has a high flow. These true pressure reducers take input an pressure up to 87 psi and drop it down to 7.5 psi (.5 bar) output. Ideally suited for Blumat and other drip irrigation systems, lowering the pressure also prevents tubing connections from coming apart and creating a flood. In gravity systems, you don't need a reducer unless you have a storage tank high up a hill, 35' or more vertical. Horizontal distance doesn't make much difference.3/4" Female Hose Thread input, 3/4" Male Hose Thread output, Max pressure in 87 psi, output pressure limited at 7.5 psi max

Read more less

Description Our XL kits are designed to water areas up to 6.5 square meters. This Pressure kit is designed to attach to your garden hose bib/spigot. Blumat systems can adjust to any plant type or desired moisture level. This specific kit is perfect for large home gardens and greenhouses. 40 Blumat sensors will ensure that your crops are properly watered - even when you're not home! Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. This kit includes forty, 5" carrots and all the parts required to connect your system to a hose or water spigot. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat system are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand your system to your specific needs. How it works  The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. If you want to use a reservoir see our 5-gallon Reservoirs, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. Note: Blumat Classics (Juniors) and bottle adapters are designed for houseplants while Tropf-Blumat Sensors (the one's with the small adjustable brown knob on top) are designed for greenhouses, growrooms, decks, and outside gardens. Blumats Austria says "Please don't use the Tropf-Blumats indoors" because if hooked up to a constant water source and a pet, guest, or user-error somehow causes a run-away, it could damage an indoor floor, drywall, carpet, or furniture. We, and many others, do in fact use these systems inside ourselves, however, we are generally around enough that if a problem did occur, we would be able to notice a problem and fix it in time (not the case if someone is on vacation). We have many guides for being able to set these up the proper way and avoid a run-away or general mistakes. Please contact us for any help, we are always here to help make your life easier. Components This Kit Includes: 40 Tropf Blumat Carrots (5") 15 Meters (Roughly 50 Feet) of Hose 1 Pressure Reducer (IG16242) 2 8mm Elbows (IG15564) 2 8mm Tees (IG15596) 2 8mm Unions (IG15638) 2 - 8mm x 3mm End Pieces (IG15986) 2 - 8mm x 3mm x 8mm Tees (IG14611) Instructions for Installation

Read more less

Description Keep your hands off my Blumats! This Blumat Protective cap prevents unintentional adjustments to the moisture level dial. Great for fending off children, pets, wild animals, or well intentioned employees.It takes some time and some skill to dial Blumats in just right. After you find the ideal soil moisture content, you adjust the valve based on growing medium, size of plants and pot, number of distribution dripper, temperatures, etc.So after finding the ideal setting, it can be very frustrating if a young child or curious co-worker comes along and plays with them, changing your settings. This protective cap will make that much less likely to happen - just snap on top of the valve dial. It comes off again but not too easily, enough to dissuade misguided tampering.

Read more less

Description Keep your hands off my Blumats! Protective cap prevents unintentional adjustments to the moisture level dial. Great for fending off children, pets, wild animals, or well intentioned employees.It takes some time and some skill to dial Blumats in just right. After you find the ideal soil moisture content, you adjust the valve based on growing medium, size of plants and pot, number of distribution dripper, temperatures, etc.So after finding the ideal setting, it can be very frustrating if a young child or curious co-worker comes along and plays with them, changing your settings. This protective cap will make that much less likely to happen - just snap on top of the valve dial. It comes off again but not too easily, enough to dissuade misguided tampering.

Read more less

Description Quick disconnect -connect for Blumat 8mm tubing. an easy and inexpensive way to be able to connect/disconnect your main 8mm supply tubing with just one quick rotation. Buy an off/off valve to be able to turn off/on incoming water supply, valve sold separately (IG15936). Also a plug is now available so you have a cheap way to plug up the fittings as well.  This makes it easy to bring the cone "carrots" in during the winter.

Read more less

Description Blumat Red/Green/Gold Hat

Read more less

Description These are the T pieces that come included with the Tropf-Blumat sensors. You can use these to replace a broken or lost one. You can also use it to run a direct line with the distributor drippers (IG14609). 8mm x 3mm x 8mm Tee - pack of 3

Read more less

Description New Blumat Mini-Strainer for Filtering In-Line This is a small strainer that goes directly into 1/4" Blumat supply line! Includes a clear bowl to make it easier to know if sediment fills up the container. Easy twist-on/twist-off clear filter bowls allows you to easily clean out the filter and re-use. Also includes quick connect fittings that gives you the ability to easily take out of line and clean. Also available for 8mm tube and with quick connect/stops that give you the option to stop water flow after removing. SHURflo 255-213 Twist-on Strainer Specifications: Inlet: 1/2" NPSM Male Outlet: 1/2" NPSM Female 50 mesh stainless steel screen Transparent filter bowl Keeps debris out of pump or water supply line

Read more less

Description New Blumat Mini-Strainer for Filtering In-Line This is a small strainer that goes directly in 8mm Blumat supply line! Includes a clear bowl to make it easier to know if sediment fills up the container. Easy twist-on/twist-off clear filter bowls allows you to easily clean out the filter and re-use. Also includes quick connect fittings that gives you the ability to easily take out of line and clean. Also available for 1/4" spaghetti tube and with quick connect/stops that give you the option to stop water flow after removing. SHURflo 255-213 Twist-on Strainer Specifications: Inlet: 1/2" MPT or 1/4" FPT Outlet: 1/2" MPT or 1/4" FPT 50 mesh stainless steel screen Transparent filter bowl Keeps debris out of pump or water supply line  

Read more less

Description This small kit comes with a Pressure Reducer, which allows you to connect and operate your system with a hose/water faucet and/or a custom pump (pressurized) system. This kit comes with 8 Blumat carrots (5"), however, a system utilizing a pressure reducer can be expanded to have up to 500 different watering spots or drippers. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners. It is easily installed with a pair of scissors and connects directly to your hose, tap or rain barrel with the help of the Pressure Reducer. This kit includes eight, 5" carrots and all parts required for a pressure-fed system. This kit includes a Pressure Reducer, which allows you to connect your Blumat system to a hose or rain barrel. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops dripping water. Each Blumat Outdoor Sensor in the Small Box Kit covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. You must have a hose bib water source for this system to connect to. If you would like to convert the system to a stand-alone gravity system, see our 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 8 Blumat Carrots (5") (IG17188) 1 Pressure Reducer (IG16242) 7 Meters (23 feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Reducer Tee (IG15476) 1 Elbow Splitter (IG15564) 1 Hose Coupler (IG15638) 1 Hose End-Piece (IG15986) 1 Rain Barrel/Gravity Tank Connectors (IG15691)

Read more less