Qualifies for Discount
Quick Connect Bulk Head Fitting, 8mm
Description High quality, easy to use bulkhead fittings that automatically stop the water when a line is disconnected. Just a quick twist connects or disconnects supply tubing. These are a little expensive but pay for themselves quickly if you need to change lines frequently. Great for flushing by letting you quickly change from a reservoir with nutrients to one with just water. Also very helpful if you use different nutrients at different times. We also have adapters so you can connect these to 3mm or 1/4" line.Use a 5/8" drill bit to install these into any container of your choice.
$13.52
Garden Hose Adapter - 3/4" Male Hose Thread (MHT) to 8mm Barbed Insert
Description Conventional Garden Hose Adapter for a 3/4" Hose Thread to 8mm Barbed Insert, easiest way to connect your 8mm tubing to a conventional hose or any 3/4" female hose outlet. This is product to save you a hardware trip, added to our website for your inconvenience. Specs: Weight 0.012 lbs HOSE BARB 1/4" THREAD 3/4" NHR MATERIAL Black Nylon (BN) COLOR Black HEX 1 2/16
$1.57
Tropf Blumat Tee and End Piece Pack (2 Sets)
Description These let you split off branch feeder tubes and terminate them instead of making wide loops with your feeder tube. Outside for big plants you may not need to use these but for smaller areas and greenhouses, they really help. Contains 2 tees and 2 end-pieces.
$5.46
Plastic Pipette 7ml
Blumat set-up instructions work fine but getting the tiny air bubbles out of the cap lets you really fine tune the setting and makes the Blumat more responsive. This Pipette makes it very easy to do that. After soaking and under water, use it to squirt water into the underside of the cap- where you see the 3 white ovals. It's not a big deal and not necessary but we think this will make the Blumats respond a little more quickly to dry and wet conditions. You can also use this to add Drip Clean and/or concentrated H2O2 to your res as well as any kind of concentrated nutrient or additive. There are many, many ways to use these
$0.22
Tropf Blumat 9" Maxi - Case of 50
The Tropf-Blumat (Drip-Blumat) is a sensor that supplies plants with drips of water via thin tubing. As the soil dries, its natural suction power triggers the opening of the Tropf Blumat allowing the water to flow. When the soil is sufficiently moist, the Tropf Blumat automatically stops. The system functions fully automatically. Every plant, every container or group of plants requires at least 1 Tropf-Blumat adjusted to the individual needs of the plant. Larger containers or surfaces require longer or more than one sensor. The Tropf-Blumat Maxi acts as a regulator and dripper, just like the standard Tropf-Blumat. This one is 9 inches long though. You put it in the ground 6 - 7.5 inches so it senses the moisture at a deeper level. This is important when your plants get bigger because the regular Blumat sensor might turn the water off too soon. And this one might turn it off too soon if your plant still has surface roots. Some growers use both - especially if they are growing in coco or a hydroponic system. Note: Blumat Classics (Juniors) and bottle adapters are designed for houseplants while Tropf-Blumat Sensors (the one's with the small adjustable brown knob on top) are designed for greenhouses, growrooms, decks, and outside gardens. Blumats Austria says "Please don't use the Tropf-Blumats indoors" because if hooked up to a constant water source and a pet, guest, or user-error somehow causes a run-away, it could damage an indoor floor, drywall, carpet, or furniture. We, and many others, do in fact use these systems inside ourselves, however, we are generally around enough that if a problem did occur, we would be able to notice a problem and fix it in time (not the case if someone is on vacation). We have many guides for being able to set these up the proper way and avoid a run-away or general mistakes. Please contact us for any help, we are always here to help make your life easier. Guide to Tropf Blumat Sensors Tips/Tricks Troubleshooting
$535.97
Replacement Brown Cap for Tropf Blumat Sensor
Description This replacement brown cap is what goes on top of the Tropf Blumat sensor and is essential for the function of the Blumat carrot. This small brown cap allows you to adjust the flow rate of the Blumat, but more importantly also serves as a critical function in making sure to stop the water when the carrot senses that it is wet enough. If you lose or break this small essential piece, your Bluamt sensor will no longer serve its function so make sure to replace it with this replacement piece.
$1.04
Blumat 3mm Mini-hose Union - 3 Pack
Description Connect the 3mm tubing used for Tropf Blumat sensors, Blumat Distributor Drippers, or Blumat Juniors.
$3.95
Sun-Mar GTG Toilet
COMPACT AND PORTABLE- The efficient GTG is the ideal portable toilet for camping or RV toilet use! INSTALLS IN MINUTES- This portable potty for adults (children too) is almost TOO easy to install! SOLID/LIQUID SEPARATION- This smart toilet separate liquid and solid waste to separate chambers! TINY- The most compact porta potty camp toilet (that doesn't sacrifice practicality) we could find! EASY DISPOSAL- The GTG functions similarly to a cassette toilet, making waste management a breeze! The Sun-Mar GTG composting toilet for RVs is much more than that. With a composting toilet this easy to use and install, you'll be wondering where else you can put them! This toilet separates liquid and solid waste into respective chambers, making clean-up extremely easy and straight-forward. This porta-potty toilet will have you wondering why you didn't ditch your RV toilet chemicals earlier. You can easily compost your waste using this toilet or otherwise dispose of it. We recommend using Sun-Mar microbe mix to keep odors down and keep the composting process active. This model is significantly lower hassle and has a lower environmental impact as opposed to incinerator toilet(s) and incinerating toilet (s). Perhaps bests of all, the GTG functions without a waterline connection, and works just fine as a waterless toilet. The GTG will totally complete your portable bathroom. These toilets are becoming increasingly popular due to their compact size, function that is similar to a cassette toilet, and ease of use. They are really ideal for homes, tiny homes, cottages, boats, mines, stables, aircraft hangars, near pools, RVs, cabins, camping, or other off-grid applications. Sleek and elegant, the GTG is Sun-Mar's smallest and most economical toilet ever! The GTG toilet sets up in minutes and its modern European styling and ultra-compact size make it a perfect solution for any place a toilet is needed. Perfect for Homes, Tiny Homes, Cottages and Cabins, Boats, Farms, Warehouses, Garages, Barns, Stables, Mines, RV's, Aircraft Hangars, Pools- the GTG can go anywhere it's not possible or cost-effective to install a conventional toilet.
$689.88
BLUMAT 8mm SHUT-OFF VALVE - Packaged
Description BLUMAT-READY - These valves are ready to be installed in-line in 8mm tubing in seconds! EASY CONTROL - Turn on/off water supply at the turn of a valve to your whole blumat system! HIGH QUALITY/ENDURING - Made simply & w/ care by Blumats you trust, you can expect these to last! PURGE - These work perfectly at the end of 8mm tubing to purge air and/or debris from the line! AUSTRIAN-MADE - Leave it to the Austrians to design and engineer such a foolproof device! These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! These can be used to turn on/off water supply to your entire garden, or just branches of your garden (or even individual plants, plant rows, etc.--your imagination is the limit!). PLOT TWIST: These blumat fittings can also be used as purge valves. A purge valve is used to remove air, particulate matter, or other debris from a water supply line. This can be accomplished in two different ways. One is simply by concluding an 8mm tubing or line with one of these valves. The valve will remain closed 99% of the time, but should be opened if air/debris is suspected in the tubing. The air and/or debris will flow out of the tubing when the valve is opened. The second way to install a purge valve in a blumat watering system is by cutting in the middle of a "loop" design, installing a 3-way 8mm Tee fitting, and installing one of these valves on the open-end of the tee. Simply open the valve to "purge" or clear your lines.
$7.35
Blumat Longs Kit - Automatic Watering Irrigation System for Up to 6 Bigger Plants
These kits water up to six plants or a 3 square yard garden. Blumat systems can adjust to any plant type or desired moisture level. This specific kit comes with 9" carrots, or Maxis, which are designed for large plants (those in 15+ gallon pots) to get water deep into the soil. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients - and still ensure healthier, more potent, and faster-growing crops. Perfect for landscapers and home gardeners, you can easily install with a pair of scissors! It can directly connect to your reservoir or rain barrel or, with a pressure reducer, to a conventional watering system's hose or faucet. This kit includes six, 9" carrots (Maxis) and all parts required for a gravity-fed system. Reservoirs should be at least 3' above ground-level. An optional Pressure Reducer attached to garden hose or faucet can provide enough water for up to 500 Blumat Carrots (See 'Related Products'). If your reservoir does not have a thru-hull installed, you will have to drill a hole into your reservoir bucket and install a thru-hull piece. For our customers' convenience, we also sell 5-gallon reservoirs with thru-hulls already installed. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat systems are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. This Deck and Planter Kit is a great way to start your customized irrigation system. The flexible system can be expanded to include up to 500 drippers. See 'Blumat Accessories' to expand our systems to your specific needs. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: Tropf Blumat systems do not include a Pressure Reducer. You will need this if you are connecting your system to a threaded spigot, such as your hose/home water supply or the spigot on a rain barrel or reservoir. The Pressure Reducer is in 'Related Products' below. This system does not include a water source. See our 5-gallon Reservoirs here, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Components This Kit Includes: 6 Blumat Maxi carrots (9") (IG16341) 7 meters (23 Feet) of 8mm Tubing (IG15634) 1 Tee Splitter (IG17310) 1 Elbow Splitter (IG15595) 1 Blumat Hose Union (IG15638) 1 Blumat End-Piece (IG15986) 1 Blumat Reducing Tee (IG15476) 1 Rain Barrel/Gravity Tank Connector (Blumat Thru-Hull Tank Connector) and Installation Instructions (IG15691)
$94.00
Blumat Pressure Reducer - 2 Pack
Description TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$111.14
Blumat 8mm Hose Unions - 3 Pack
Description Use these to add more line for more plants as your garden grows, or get some just in case you cut into the wrong place or need fix a bad cut. The 3 pack comes in a blister-pack which is ideal for stores, storage, or for hanging up.
$8.64
Bottle Cap Adapter for Blumat Systems
Easily convert a used plastic bottle to a Blumat supply source. This works really well for hanging plants - both inside and outside. Just attach the plastic bottle to the hanger and put the Blumat in the soil. You can cut the bottom off the plastic bottle (you can use these cut off bottoms to make plant holders that keep wooden shelves from getting rings) and fill them from the top. If you prefer to keep the bottle intact, the water will last longer and you don't have to worry about insects getting in it but it's harder to fill. If you use the auto-stop version of this bottle cap though (IG15525), you can more easily move the bottle to fill and put back without spilling the water all over. This uses the thread type common on most one liter plastic bottles - not the same as 3/4" hose thread.
$1.57
Red 1/4" Super-Flex Tubing for Blumat Watering Systems - By the Foot
Description Super flexible and almost impossible to kink(For standard irrigation systems, for Blumat systems refer to 8mm Superflex)This tubing is more expensive than typical 1/4", but is extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, etc.It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reuseable, and we can cut this to the length you need.We also have this in 100' rolls.
$1.23
3mm Tees - 10 Pack
Description Use these to branch out and run distribution drippers in two directions. You can also put them directly into a 1/2" or 3/4" drip line and install two Blumat sensors. Comes in a pack of 10.
$12.48
Strainer for Blumats - Clear Bowl, 8mm
A relatively inexpensive but still high quality and easy-to-use filter. Because of the clear base, you can quickly see if it's getting dirty and you can clean it out without having to unhook your lines. Includes adapters going to 8 mm Blumat line so to install, just cut the line and push the tubing on to the adapters! If your water isn't clean or you'd like to use thick nutrients in a reservoir, this filter will keep your Blumats safe. The screen has just the right mesh - not too big that could let clogging particles through or too small that would mean unnecessary cleaning. Clear bases make it easier to tell if they need to be cleaned but best only in dark rooms. White bases better to prevent algae build-up. For the same price, we can also ship this with fittings for 1/2" drip, 3/8" drip, 1/2" & 3/4" slip PVC. For a little extra, we can provide a fitting for 3/4 hose thread or any combination of the above. Specs Blumat Filter/Strainer Specs: Length 3 In. Height 4 3/16 In. 177 Microns 80 Mesh 316 Stainless Steel Screen Color Clear or White Screen Area 6.75 Sq.-In. Material of Construction Polypropylene 20 Max. Flow GPM Max. Pressure 100 At 70 Deg F PSI
$39.13
8mm Tubing Clamps - 10 Pack
DescriptionKeep your tubing in place. 1/2" round clamp with nail for easy installation
$3.89
Blumat Quick Connect Fittings 8mm to 8mm
Description Quick disconnect -connect for Blumat 8mm tubing. an easy and inexpensive way to be able to connect/disconnect your main 8mm supply tubing with just one quick rotation. Buy an off/off valve to be able to turn off/on incoming water supply, valve sold separately (IG15936). Also a plug is now available so you have a cheap way to plug up the fittings as well. This makes it easy to bring the cone "carrots" in during the winter.
$2.16
3/4" MPT x 3/4" MHT or 1/2" FPT Fitting - Adapt to Garden Hose or Pressure Reducer
Description A very versatile adapter! On one side it has 3/4" MHT (male hose thread) and 1/2" FPT, on the other 3/4" MPT (male pipe thread). These are handy for many situations including adapting the input for a Blumat Pressure reducer from the 3/4" hose thread it comes with to 1/2" pipe thread.
$1.82
Mini Pump for Pressurizing Blumat systems
The ultimate upgrade for a Blumat system. The Mini Pump Kit converts your gravity-fed setup into a pressurized irrigation system — faster sensor response, more consistent moisture levels, and the freedom to run a large reservoir on the ground without elevation. Once you run Blumat on pressure, it's very hard to go back. Why Pressure Changes Everything ＋ Blumat systems are pressure-sensitive. Gravity setups can work well, but they often introduce slow response times and small inconsistencies. When you switch to pressure, the entire system tightens up: Faster sensor response to soil moisture changes Adjustments show results much more quickly More consistent moisture levels across your grow More reliable overall system performance What's Included ＋ Mini pump Expansion / pressure tank Adjustable pressure reducer with integrated gauge Inline filter Bulkhead fitting for reservoir connection All tubing and hardware to connect to your reservoir Adapter for 8mm tubing or 1/2" black poly via Perma-Loc fitting System Size & Capacity ＋ Ideal for small tents and home grows Scales to multi-tent setups Rated for up to approximately 50 gallons per day Suitable for larger rooms when properly designed Frequently Asked Questions ＋ Do I need a pump for a small Blumat system?No — but even small systems benefit from faster response and more consistent performance when running on pressure. Can I use a larger reservoir with this system?Yes. One of the biggest advantages is being able to run a large reservoir on the ground instead of elevating it. What's the benefit of switching from gravity to pressure?Faster sensor response, more stable moisture levels, better system control, and reduced maintenance.
$464.40
Blumat Distributor Drippers (Ten) + 2m of Drip Tube - 4 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This comes with 4 packs. Each pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$77.46
$2.04
Perma-Loc 1/2" x 3/4" MHT End Cap
The Perma-Loc 1/2" x 3/4" MHT End Cap is a durable and reliable irrigation fitting designed to provide a secure and watertight seal. It features a 1/2" barb on one end, allowing for easy connection to a 1/2" irrigation tubing, and a 3/4" male hose thread (MHT) on the other end, providing compatibility with standard garden hoses or other fittings with a 3/4" female hose thread. The end cap is made from high-quality materials to ensure long-lasting performance and resistance to weathering and UV damage. It is an ideal choice for sealing off the end of a 1/2" irrigation line or for creating a watertight connection point.
$2.06
Blumat Pressure Reducer - 4 Pack
TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi.
$204.12
What Growers Are Saying
