Marketing: Published Products
Perma-Loc 1/2" x 8mm Barb w/ Valve
Perma-Loc fittting that adapts 1/2" tubing directly to 8mm tubing, with an integrated on/off valve.Center of fitting swivels.
$7.73
Bulkhead Fitting to 1/2" Barbed Insert
Bulkhead Fitting 3/4" male hose x 1/2" FPT that also comes with the fitting to allow you to connect to a 1/2" line, thanks to 1/2" insert and clamp. Use to connect a large supply line into your reservoir. Great for gravity systems!
$9.65
Foot Valve Connecting System
Description If connecting a Blumat pump system to a reservoir through the side or bottom is inconvenient or not possible, this option makes it easy to mount the pump above the reservoir without losing the prime. The foot valve stops the water from going back down into the reservoir and air getting into the line each time the pump turns off. This includes 6' of special flex-tube, a foot valve, clamps and fittings that will connect into the filter or pump.
$50.97
BluSoak tape fitting w/ 5" Sensor Carrot Set
Description Set for connecting a Blumat sensor to BluSoak 2.0 Drip Tape. Easy convenient way to setup a BluSoak system, all you need is the amount of BluSoak soaker hose you need, and either another BluSoak to Sensor set or a BluSoak end plug fitting. Components The Set includes: 1 5" Tropf Blumat (IG19079) 1 Distribution Dripper (IG15565) 1 Distribution Dripper Stake (IG16314) 1 BluSoak to 3mm Adapter (IG16085)
$15.75
Blumat GmbH & Co. KG Blumat Bulkhead Filter
This new Blumat input filter fits on the Blumat Bulkhead Through-Hull Tank Connector, inside the reservoir and keeps sediment and leaves from getting into your supply line. It doesn’t fit on the older tank connectors we had before August 2023 though. The new ones (on the right in the picture below) have two tabs on the sides and a 6-sided jut on the input side, where the old ones have two parallel lines. An inexpensive "insurance policy," this could save you quite a bit of headache if your water doesn't always stay clean.
$10.80
Drip Irrigation Handle Punch
Drip Irrigation Handle PunchThis inexpensive but good quality punch makes installing drip system emitters, sprayers, and foggers quick and easy.
$10.00
Quick Connect Shut-Off Valve (Valve Only) -- for Blumat Systems
Description Color may vary. Use a quick-connect to turn the water from your supply line either on or off. This is the middle fitting (the actual valve piece) only, purchase separate fittings to attach to this valve piece and customize it how you want. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$2.94
Blumat Tropf 9" Maxi Sensors - 10 Pack
The Tropf-Blumat Maxi acts as a regulator and dripper, just like the standard 5” Tropf-Blumat. This one is 9 inches long though. You put it in the ground 6 - 7.5 inches so it senses the moisture at a deeper level. This is important when your plants get bigger because the regular Blumat sensor might turn the water off too soon. This one might turn it off too soon if your plant still has surface roots. Some growers use both - especially if they are growing in coco or a hydroponic system. The Tropf-Blumat (Drip-Blumat) is a sensor that supplies plants with drips of water via thin tubing. As the soil dries, its natural suction power triggers the opening of the Tropf Blumat allowing the water to flow. When the soil is sufficiently moist, the Tropf Blumat automatically stops. The system functions fully automatically. Every plant, every container or group of plants requires at least 1 Tropf-Blumat adjusted to the individual needs of the plant. Larger containers or surfaces require longer or more than one sensor. All Tropf-Blumats are connected using one supply tube, this allows for flexibility in the layout and is changeable at any time. Automatically waters individual plants and only when needed. There are a few options for a water source; you can either connect the system directly to your hose tap or rain barrel (with fittings not supplied with this product). Guide to Tropf Blumat Sensors Tips/Tricks Troubleshooting
$112.84
Blumat Backyard Irrigation Kit
This kit supplies everything you need except for the water. Just put the 5 gallon bucket near where you want the irrigation, attach the XL Blumat Classic watering stakes, and insert them into the potting mix or soil. The Blumats wick moisture as the plants deplete it, irrigate on the plants schedule instead of an arbitrary timer, and saves precious water. To increase or decrease the moisture content in your containers, just raise or lower the bucket. UN secretary general, António Guterres, says "we've passed the era of global warming" and “the era of global boiling has arrived." According to new scientific studies, less moisture in the soil leads to more severe heat waves while more soil moisture lowers air temperature. We designed this kit as a simple and inexpensive way almost everyone can help. You can let it fill up from rain, from a hose, or normally-wasted water like the water from a sink, shower, or bath that goes down the drain while we wait for it to get hot (just put a watering can or container under the faucet). Download installation instructions here.
$108.00
3/4" Hose Thread 75 Mesh
3/4" Hose Thread 75 Mesh Size: 3/4" Mesh: 75 Mesh
$21.54
PVC 3/4" FHT x 1/2" FPT Swivel Adapter
Description *This product is part of our "save a trip" to the hardware store line of products, where you may be able to find it cheaper but we added it to our website out of convenience. Use the 3/4" FHT x 1/2" FPT Swivel Adapter to be able to connect and adapt a 3/4" supply line to a 1/2" supply tube.
$7.46
4-Way Valves for Blumat Flush Systems
Description This is the heart and soul of our Blumat flush systems - the 4-way valve. Rather than ordering all the extra parts and following a complex system, use this valve and customize your own. You can add several drip stakes for larger pots and use this in many different ways. This kit comes standard with fittings for 3 connections: one 3mm, one 1/4", and one 8mm for the supply line(s). NOTE: You can request different sizes or configurations for no extra charge. Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Easily: Flush your plants Add thick nutrients and teas without clogging your Blumat sensors Clean out algal and bacterial slime, as well as sediment, from your supply lines Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding tick nutrient or tea, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake.
$6.48
Support Stake for 1/4" tubing - 100 Pack
Description These are great for holding up 1/4" tubing, allowing for greater organization and stability. Also works with 8mm tubing, but stretches the grabber slightly. Length: 8 cm
$22.68
Poly Hose Cutter
For cutting poly hose.
$12.99
1/2" Poly Trunk Line Kit
Product Description: This Trunk Line Kit is the foundation of a flexible, expandable irrigation system—perfect for larger gardens or complex layouts with multiple zones. Available in either 50 feet or 100 feet of durable ½-inch poly tubing, this kit allows you to deliver water from your source—whether it’s a raised reservoir or pressurized pump system—to several key locations throughout your garden. Each kit includes up to six ½-inch to 8mm reducing tees with shutoff valves, so you can create distinct irrigation zones exactly where you need them. From there, you’ll connect 8mm Bluemat Superflex tubing to complete your system using one of our 8mm Supply Kits (sold separately), which include the tubing and shutoffs needed to feed your individual beds or rows. This kit keeps things simple and scalable: Start with a central trunk line (main line) Branch off to each zone head using reducing tees with shutoffs Complete each zone using 8mm Superflex and Bluemat sensors Whether you're irrigating beds, pots, or rows, this kit gives you a clean, organized way to manage multiple zones from a single water source.
$52.49 - $116.64
8mm to 1/4" Quick Connect On/Off Valve
Description Use a 8mm to 1/4" quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$4.49
4' x 4' Capillary Mat System with Blumat Irrigation
Description Capillary Mat System, 4’ x 4’ Here's a great, automated systems for growing seedlings, starts, and clones. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don't dry out or drown. Watch out for old info: this used to include a Blumat Surface mount but now it's an option along with using a Blumat sensor in one of the pots, manually adding water, wicking it with a strip of cap mat, and using a Surface Mount with Globe rather than connecting to pressure. Click here to download the instructions. The water wicks up from the bottom so it doesn't squeeze the oxygen out of your planting mix or disturb delicate seed sprouts like hand-watering easily does. https://www.irrigation.equipment/guide-to-blumat-regulated-capillary-mat-systems Components This set-up includes: 1 Capillary Mat 4' x 4' (IG16914) 1 - Perforated Black Foil, 1.2 meters wide (47.3") Anti-Algae (IG16354) 5 ft Super-Flex 8mm by the Foot Silicone Rubber Tubing (IG15634) 8 ft BluSoak 2.0 Drip Tape (IG18206) 4 Blumat Elbows - Bulk (IG14613) 4 Blusoak to 8mm Barbed Adapter (AG15807) 1 3mm Quick-Connect On-Off Adapter Valves (IG15939) This system needs to have a flat surface but it can be almost anything: a cement or tile floor, a plastic-covered sheet of plywood, metal or glass. Does not include Impermeable Plastic Layer you need for the bottom to keep the water in.
$79.00
PVC 1/2" MPT x 1/2" Insert Adapter
Description1/2" MPT x 1/2" Insert adapter. Use with hose clamp and 1/2" poly tubing.
$2.29
Pressure Reducer Screen
Replacement screen for the input side of a Blumat brand 15psi pressure reducer.
$3.17
3mm to Blusoak Tee
Description coming soon.
$5.40
3mm Professional Quick Connect, Stop on Both Sides
Description Easy-to-use professional quick connect for your 3mm Blumat line.
$18.70
Buildable PVC 3/4" 4-Way Elbow
FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system! These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.
$0.95
Perma-Loc 1/2" Swivel Tee w/o screen
Female thread adapter works with male hose fittings and splits into two tubing connection barbs.
$8.33
Bonsai Kit Compact
DescriptionThis kit provides an easy, fast, and water-saving way to water traditional small sized bonsai pots. No timers, batteries, or electricity required! This system uses a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your bonsai medium. It also has 4 additional distribution drippers that spread water out across different areas on the surface of the pot. And it has a quick-connect with valve to make it easy and fast to move plants when the weather changes, you want to change the amount of light they receive, to prune or display somewhere else.Water source/reservoir needs to be above the garden for a gravity system. For a pressure system you will need a faucet or garden hose and a Blumat Pressure Reducer.
$38.55
What Growers Are Saying
