Official Blumat Distributors for the United States | FREE Shipping Over $100

Beat the heat (400 x 140 px) (1500 x 120 px).jpg__PID:5fc4cf0b-0757-4b4c-95d5-6f197b12d13e
Beat the heat (400 x 140 px)-2.jpg__PID:0b07577b-4c15-456f-997b-12d13e076cea

Marketing: Published Products

567 products


  • BluSoak Flush Valve / BluSoak Drip Tape to 1/2" MPT - BluSoak to PVC Connection

    BluSoak Flush Valve / BluSoak Drip Tape to 1/2" MPT - BluSoak to PVC Connection

    Description Connect your BluSoak directly to a 1/2" Male Pipe Thread. Comes with a Valve that allows you to stop water flow. These also work great for putting at the end of your BluSoak line as a flush line, simply open the valve to purge water/air out. Use our 3/4" FHT to 1/2" MPT fittings (IG15620) and connect it directly to your hose. Make sure you reduce the pressure if not using a Flow Controller, pressure needs to be below 10psi if your trying to use our Soaker Hose, ideal is 3psi. Link to Soaker Hose Benefits Video

    $2.00

  • Senninger 3/4" 15psi Pipe Thread Pressure Reducer-1

    Senninger 3/4" 15psi Pipe Thread Pressure Reducer

    Senninger 3/4" 15psi Pipe Thread Pressure Reducer Designed and built to rigorous standards, Senninger Pressure Regulators are known for their accuracy and reliable performance. *Not recommended for use in Blumat systems* Preset Operating Pressure: 15 psi Max Inlet Pressure: 95 psi Flow Rate: 0.5 - 7 GPM

    $15.83

  • Preset Blumat 1-3 Gallon

    Preset Blumat 1-3 Gallon

    1 review

    Revolutionize your irrigation system with our combined Blumat Preset Tropf (5 inch) sensor & Drip Ring (5 inch) - the professional choice for efficient, assembly-free watering. This innovative dripper seamlessly integrates with the pre-calibrated Blumat along with eliminating the need for setting up and maintaining the Blumat.    Key Features   Blumat Compatibility: Our Drip Ring has a 3mm inlet barb that connects easily with Blumat sensors. No Assembly Required: Our plug and play design saves you valuable time and reduces labor. With this ready-to-use solution, you can enjoy the benefits of efficient irrigation without the complexities of component assembly. Nutrient Compatibility: Our Drip Ring has a built-in filter and clog resistant emitters which allows you to easily feed a variety of nutrients through the ring without fear of clogging. Durable Construction: The drip ring is made from the best quality virgin resin ensuring a highly durable product with a long lifespan. Even Distribution: With 4 strategically placed drip points, this ring delivers water precisely where your plants need it most. Invest in your plants' health and growth with the Blumat Drip Ring - the ultimate blend of convenience and professionalism for your gardening needs.  

    $20.52

  • Anti-Algae Biofilm Buster 1 gallon*-1

    Anti-Algae Biofilm Buster 1 gallon*

    Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. A drinking-grade quality biofilm buster -- this uses oxygenated salt cluster ions to react with and disrupt the larger organic molecules like common biofilm. It's more effective than straight chlorine or hydrogen peroxide without the negative side-effects. Beyond keeping your Blumat lines clean and clear, it reduces root born disease, improves nutrient absorption, increases efficient plant growth, and eliminates algae and Pythium from roots. Has a chlorine base. Dilution ratio is 1:2000. Our Biofilm Buster goes 4x further than a comparable size of the other leading brands because it's more concentrated!

    $135.00

  • Seed-Starting Cap Mat/ Thick Mat & top; 2 Sets

    Seed-Starting Cap Mat/ Thick Mat & top; 2 Sets

    Seed-starting Cap Mat setsHelp protect and nourish those plants starts, seeds, and clones!The smaller the plant and the less soil or potting mix, the easier to both dry out and get too wet. And when either of those happen, plant momentum slows or stops. Keeping this cap mat set on your trays, under your plants can help prevent both of those problems. If one plant gets too much  water a, it will spread to the water to other ones on the tray. If a plant doesn't get enough, it can share the water from another one that got more than it needs. These come 12" wide by 23" long so they easily fit into a standard 10" x 20" seed-starting tray or anything smaller -- just cut with scissors to fit. The cap mat holds and spreads the water around, the MicroFab goes on top of the mat, under the plants and prevents algae, evaporation, and the roots from growing into the capillary mat.Put water in the tray manually, automatically with a Surface Blumat, a Tropf-Blumat in one of the pots, with a strip of cap mat going to a water source, or with our new Clear Globe connected to a Surface Blumat.Key Benefits  Water comes from bottom so roots grow down instead of staying closer to the surface;  Prevents both under- and overwatering Flexibility -- water different plant types in different sized pots on same bed Move plants on and off without needing to change water lines or emitters Easy set up -- just get water to the bed, don't worry about getting it to the plants Prevents fungal diseases, powdery mildew, and root rot.  Lower water use, little evaporation; can reduce water usage by up to 50% Versatility -- use for everything between a small windowsill to a large commercial operation; from a deluxe automated system to manual, low-cost choices   Increased and uniform growth Low maintenance  Lower costs, less labor

    $15.12

  • Blumat Large Hose Pressure Garden Kit-1

    Blumat Large Hose Pressure Garden Kit

    Description Perfect for landscapers and home gardeners. An included pressure reducer allows for you to simply connect your system to a home faucet or garden hose. This system can also be expanded to fit your specific irrigation needs up to 500 distribution drippers! This kit will easily water two 4'x8' raised beds or a large combination of plants in pots, planter boxes, landscaping, or in rows. Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients and still ensure healthier, more potent, and faster-growing crops. The Tropf Blumat system is great for watering balcony boxes, planters, hanging baskets, and row crops. It fulfills the needs of the plants on an individual basis, regardless of their location, light levels, or plant type. Our systems save your plants from excessive and improper watering. Tropf Blumat system are ideal for plant groupings that require consistent moisture, such as vegetable gardens, bushes, flower beds, grow bags and greenhouse containers. Not only do your plants receive the right amount of water, slow and consistent dripping ensures that your plants receive warmed water, avoiding shock. How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When the soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops taking in water. Each Blumat Outdoor Sensor in the Deck and Planter Set covers an area 12 inches in diameter. To expand and customize your own system, add additional Supply Hoses, Outdoor Sensors, and Distributor Drippers. PLEASE NOTE: This system does not include a water source. If you want to use a reservoir, see 5-gallon Reservoirs below sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently , but extra costs may apply. Components This Kit Includes: 2 - Blumat 8mm Shut-Off Valve (IG16893) 2 - Blumat Quick Connect / Disconnect for 8mm Supply Tubing - No Water Stop (IG15524) 8 - Blumat 8mm Tees (IG15653) 10 - Blumat 8mm Elbows (IG15595) 16 - Tropf Blumat 5" Sensor (IG14607) 40 ft - 3mm Drip Tubing (IG16021V) 32.8 ft - 8mm Water Supply Tube for Blumats (IG15470) 32 - Blumat Distribution Drippers (IG15557) 8 - Blumat Distribution Drippers - End Piece (IG15558) 1 - Plastic Pipette (IG15651) 2 - Blumat Quick Connect Shut-Off Valve (Only Valve) (IG15936) 1 - Blumat Standard Pressure Reducer 1bar (15psi) (IG14606) 6 - Blumat Stops, Sealing Caps (IG15509) 3 - Blumat 3mm Tees (IG15581) 3 - Blumat 3mm Y Connector (BM15502) 3 - Blumat 3mm Mini-Hose Union (IG15520)

    $391.48

  • Tees 1/4"-1

    Tees 1/4"

    Tees for 1/4" line.

    $0.29

  • PVC Adapter 3/4" MPT to 8mm Tubing-1

    PVC Adapter 3/4" MPT to 8mm Tubing

    DescriptionPVC Adapter 3/4" MPT to 8mm Tubing

    $6.42

  • PVC 3/4" MPT x 1/2" FPT Bushing, Sch 40-1

    PVC 3/4" MPT x 1/2" FPT Bushing, Sch 40

    Description3/4" MPT x 1/2" FPT Bushing. Schedule 40 PVC.

    $2.23

  • Buildable PVC 3/4" 5-Way Elbow-1

    Buildable PVC 3/4" 5-Way Elbow

    FURNITURE GRADE - Excellent quality PVC fittings & connector(s) for buildling scrog, structures, or anything else you can imagine! PVC PIPING READY - Available in 1 inch or 3/4 inch, you just need PVC piping to build with these elbow(s)! USER FRIENDLY - No glue or adhesives necessary! Simply cut PVC pipes, and insert - these are no fuss and straight-forward! REVOLUTIONARY - Build anything you can imagine! SCROG, raised beds, trellis, greenhouses, chicken coops & more! NOT FOR WATER - These PVC fittings are for building and construction, not irrigation. So, do not use these with your watering system! These furniture grade PVC fitting(s) are the perfect solution to your building problems! These connectors can be used to construct variations of frames, including scrog systems, scaffolding, greenhouses, doghouses, chicken coops, raised beds, trellis systems, or anything else you could imagine. To build the frame, just purchase some PVC pipe locally and insert it into these fittings. You don't even need glue, adhesive, or other materials to fit the pipe and fittings snugly. You can fit these 3 way, 4 way, and 5 way PVC elbow(s) without a square. You really don't need additional tools to utilize these - no flange(s), screen(s), or galvanized materials are necessary. You are limited by your imagination only - you can build large pvc (or pbc if you have clumsy fingers) structures, small structures, integrate tee or y fittings, cross your pvc pipes, or tackle any other cool projects you can think up. It is wise and recommended to keep these on hand if you're into off-grid living, homesteading, self-sufficiency, independent living, farming, or construction. These really are the one tool you need to tackle any home construction project at a low cost.

    $0.95

  • Water Pressure Gauge (0-100 PSi) Liquid-Filled Gauge-1

    Water Pressure Gauge (0-100 PSi) Liquid-Filled Gauge

    0-100 PSI READING • This liquid-filled pressure gauge and psi gauge gives accurate readings in the range of 0-100 psi! WATER PRESSURE TEST GAUGE • This gauge can be used to test water pressure, whether in your home, irrigation system, or anywhere else! SCHRADER VALVE COMPATIBLE • This gauge reads from Schrader valves, the same valves used with tire pressure gauge(s), tire gauge(s), and air pressure gauge(s)!* (This product does require an additional quick-connect fitting to read directly from Schrader Valves) RELIABLE • Unlike digital tire pressure gauge(s), this does not feature any electronic or digital components and is built to last! VERSATILE • Can be used as an air gauge, water gauge, water pressure tester, RO pressure gauge, or pool pressure gauge!   Instead of having to buy, install, and maintain multiple pressure gauges; use these quick connects to just keep one and quickly test your pressure in many different places. These really help in large filtration systems where you can check before and after the filters to let you know if they need to be cleaned yet or not. The kit includes an oil-filled (so you can use at different angles) 0-100 psi gauge and you can also order the quick connects separately. Liquid-filled pressure gauge. Reads from 0-100 psi. This is ideal for pressure in irrigation tubing=lines using Shrader valves. This product can also be used to detect whether filtration systems require cleaning or not.

    $23.59

  • 1/2" Tee (insert-FPT-insert)-1

    1/2" Tee (insert-FPT-insert)

    This is the brown fitting shown in the image that fits on top of accumulator tanks.

    $2.72

  • 4 Branches for micro tube 3/5mm-1

    4 Branches for micro tube 3/5mm

    Description1/4" female insert fitting x 1/8" barbs. Usually used for multi pot drip emitter systems in commercial applications.

    $0.40

  • Irrometer Standard (SR) Model, 18"-1

    Irrometer Standard (SR) Model, 18"

    1 review

    OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

    $189.83

  • Hose security clamps, 5 pcs-1

    Hose security clamps, 5 pcs

    Description Use to secure connection points on 3mm and 8mm fittings. Snaps into place.

    $6.48

  • Figure 8 End Closures 1/2"-1

    Figure 8 End Closures 1/2"

    End closure for 1/2" pipe/tubing. Figure 8 Ending.

    $0.48

  • Tape End Closure Flat-1

    Tape End Closure Flat

    Tape End Closure Flat

    $0.29

  • Schrader Quick-Connect w/ Liquid Filled 0-100 PSi Gauge-1

    Schrader Quick-Connect w/ Liquid Filled 0-100 PSi Gauge

    0-100 PSI READING  This liquid-filled pressure gauge and psi gauge gives accurate readings in the range of 0-100 psi! WATER PRESSURE TEST GAUGE This gauge can be used to test water pressure, whether in your home, irrigation system, or anywhere else! SCHRADER VALVE COMPATIBLE This gauge reads from Schrader valves, the same valves used with tire pressure gauge(s), tire gauge(s), and air pressure gauge(s)! RELIABLE Unlike digital tire pressure gauge(s), this does not feature any electronic or digital components and is built to last! VERSATILE Can be used as an air gauge, water gauge, water pressure tester, RO pressure gauge, or pool pressure gauge! Instead of having to buy, install, and maintain multiple pressure gauges; use these quick connects to just keep one and quickly test your pressure in many different places. These really help in large filtration systems where you can check before and after the filters to let you know if they need to be cleaned yet or not. The kit includes an oil-filled (so you can use at different angles) 0-100 psi gauge and you can also order the quick connects separately. 

    $43.10

  • Irrometer Standard (SR) Model, 6"-1

    Irrometer Standard (SR) Model, 6"

    OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

    $214.58

  • 3mm Quick Connect with Auto Shut Off-1

    3mm Quick Connect with Auto Shut Off

    DescriptionOur professional style quick connect/disconnect fitting that stop flows in either direction when disconnected. A budget option in this category of quick connect.

    $20.09

  • Quick Connect Adapter 1/2" NPT w/ Water Stop Technology-1

    Quick Connect Adapter 1/2" NPT w/ Water Stop Technology

    Description This includes two integrated fittings, each threaded for standard 1/2" piping/tubing. When disconnected, these fittings stop water flow (from one direction). Great for making disconnections in your line without spewing water all over the place!

    $19.97

  • Garden BluSoak Kit, 100'-1

    Garden BluSoak Kit, 100'

    This kit include 100 feet of BluSoak (IG18206)

    $111.14

  • 5-Gallon Reservoir w/8mm Bulkhead (1 hole)

    $41.04

  • Preset Blumat 5" Drip Ring

    Preset Blumat 5" Drip Ring

    Revolutionize your irrigation system with our combined Blumat Pre-set Tropf sensor (9 inch) & Drip Ring (5 inch) - the professional choice for efficient, assembly-free watering. This innovative dripper seamlessly integrates with the pre-calibrated Blumat along with eliminating the need for setting up and maintaining the Blumat.  Key Features Blumat Compatibility: Our Drip Ring has a 3mm inlet barb that connects easily with Blumat sensors. No Assembly Required: Our plug and play design saves you valuable time and reduces labor. With this ready-to-use solution, you can enjoy the benefits of efficient irrigation without the complexities of component assembly. Nutrient Compatibility: Our Drip Ring has a built-in filter and clog resistant emitters which allows you to easily feed a variety of nutrients through the ring without fear of clogging. Durable Construction: The drip ring is made from the best quality virgin resin ensuring a highly durable product with a long lifespan. Even Distribution: With 4 strategically placed drip points, this ring delivers water precisely where your plants need it most. Invest in your plants' health and growth with the Blumat Drip Ring - the ultimate blend of convenience and professionalism for your gardening needs.

    $21.60

Login

Forgot your password?

Don't have an account yet?
Create account