Effortlessly water nine 1-3 gallon containers with our 4x4 Gravity Kit. Each kit includes nine 5-inch preset sensors and 5-inch drip rings, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest.
Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have and dramatically decreasing setup time. Just set them where you want them to be right out of the box.
Components
This Kit includes:
9 Preset Blumat 1-3 Gallon (IG19145)
9 Blumat Supply Kit Small (IG19155)
9 Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (IG16806)
Effortlessly water six 5-7 gallon containers with our 4x4 Gravity Kit. Each container includes six 9-inch preset sensors and 5-inch dtrip rings, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest.
Sensors arrive pre-calibrated with two ma rkings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time for small systems.
Components
This Kit includes:
6 Preset Blumat 5-7 Gallon (IG19146)
1 Blumat Supply Kit Small (IG19155)
1 Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (IG16806)
Description
A complete, automatic irrigation kit for a 4x4 tent or bed with up to 4 plants in between 10 and 20 gallon pots. Includes 4 pre-calibrated Blumat Tropf stakes for easy installation, which eliminate almost all the problems people have setting up and maintaining Tropf Blumats.
Effortlessly water four 10-20 gallon containers with this Gravity Kit. Each kit includes four 9-inch preset sensors and 10-inch drip ring, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest.
Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time for small systems.
Pre-calibrated for most soil/media types like living soil, standard potting mixes, coco, and peat; they take most of the work and worry out of the installation! Set just where you want them to be right out of the box.
Components
This Kit includes:
4 Preset Blumat 10-20 Gallon (IG19147)
4 Blumat Supply Kit Small (IG19155)
1 Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (IG16806)
(Effortlessly water a 3'x3' or 4'x4' bed with this Gravity Kit. Each container includes a 9-inch preset sensor and a four line Blusoak Manifold, ensuring precise and consistent hydration without pumps or timers. Keep your reservoir full and let gravity do the rest.
Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time.
Components
This Kit includes:
Preset Blumat Bed-Medium (IG19151)
Blumat Supply Kit Small (IG19155)
Blumat 5 Gallon Reservoirs - Deluxe w/ water level indicator (IG18352)
Effortlessly water a 4x4 area with our Capillary Mat Kit. Controlled by a single preset sensor, this mat provides even, consistent moisture across the entire mat. Gravity-powered and easy to use, this kit removes the need for pumps or timers. Keep your reservoir full and let gravity do the rest.
Sensors arrive pre-calibrated with two markings on the brown adjustment dial - one for gravity and one for pressure systems. This new innovation makes the Blumat Tropf practical for large commercial systems with thousands of plants as well as preventing the most common problems people have while dramatically decreasing setup time for small systems.
Components
This Kit includes:
1 Preset Blumat Capillary Mat- 4x4 (IG19154)
1 Blumat Supply Kit Small (IG19155)
1 8mm BULKHEAD / Through-Hull Tank Connector - 2 Pack (IG16900)
1 Nursery Bags 1 Gallon 50-Pack, Non-Woven Fabric (IG19235)
Description
From Gravity to Pressure in Minutes
Gravity irrigation works great but has challenges when systems expand or ceilings aren't high enough. Most pressuring systems get expensive and complicated. This new kit solves those problems, keeps the cost and learning curve down, and lets you leave without worry for longer times!
Use this kit for up to 50 gallons per day, our Horizontal Pump Kit if you need up to 250 gallons a day.
What This Kit Does Not Include
Supply Tubing for your Blumat system.
A reservoir.
A drill bit to install our bulkhead into the reservoir. ( A step up bit is preferable)
Components
What This Kit IncludesThe pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer, two pressure gauges, a 3 gpm pump, a small filter, and 2 gallon pressure tank.
Description
Description This professional moisture meter will show you how dry or wet the soil is at the push of a button. The digital moisture meter can be an ideal tool to help when dialing in your Blumat or other garden irrigation system. Keeping your soil at the ideal moisture level keeps microbes and other microorganism populations happy. *DO NOT GET ELECTRIC/DIGITAL PART OF METER WET. USE PROTECTIVE CAP, ESPECIALLY IF YOU ARE USING THESE OUTSIDE, HAND-WATERING, OR FREQUENTLY APPLY FOLIAR SPRAYS. How it Works The ceramic extension is soaked in and filled with water, just like a Blumat sensor. When this is inserted into the growing medium, the medium exerts a pressure on the water inside the cone. When the medium is more dry, it pulls harder on the water inside the cone. When the medium is more moist, the force pulling inside the cone is less. These forces of pressure correlate to different readings on the meter. A reading of 0 indicates standard water, while a high reading of 750 or so indicates sawdust completely void of moisture. The digital moisture meter is a tensiometer, but indicates moisture levels using pressure as a correlative. Reset Your Meter! When you first get your Digital Moisture Meter, it is best practice to reset it. It's also advisable to reset it periodically with continuous use. Click here for instructions.
Details
Materials
Clay Plastic Dimensions
Weight: 2.6oz Total length: 9.4" Max soil depth: 7.25"" Top width: 1.8" Sensor width: 1" Power
1 CR2032 battery (installed, replaceable). Water Proof?
No. Protect digital top from water. Stand Alone Product?
Yes Comparison Chart
Blumat Digital Moisture Meter
Analog Moisture Meter
12" Low Tension Irrometer
Measures Moisture in
mBar
hPa, hPa = mBar
kPa, kPa = 10 x mBar
Accurate Readings in
About 45 minutes to an hour
As little as 5-10 minutes
Almost instant
Can Get Wet
No
Yes
Yes
Needs a Battery
Yes. Can be replaced: IG16246
No
No
Needs a Service Kit
No
No
Yes. One sevice kit can service multiple irrometers: IG17954
Additional Info
Additional Info
Wait until after watering media to let the moisture evenly disperse and stabilize before trusting readings from the meter.
Aim for 100mbar on average in living soil. Some gardeners report best results at 40mbar–I personally get overwatering symptoms there. Let mbar readings on your meter be a guide to plant health, not a tyranny that rules your mental peace.
The meter cannot be used in extremely airy or chunky media such as chunky perlite, lava rock, etc. When the ceramic is in contact with air, the pressure readings will be extremely high. However, your plant roots may have access to moisture in these media even when the meter is displaying high readings.
Avoid getting the digital display wet. The protective cap is highly encouraged in all circumstances, and is completely necessary for outdoor growers as well as those who supplement with any over-the-top watering.
Do not drop or otherwise rattle the display.
Keep the digital display in dry storage when it’s not in use. Guide to Blumat Digital Moisture Meter | Irrigation Equipment
Description
Traveling or too many plants without enough time to take care of them? Blumat Classics can take care of them for you and make everyone think you have a "green thumb." This kit can water up to 12 plants and you can easily extend it for more. Without batteries, timers, electricity, or even a conventional water source, Blumat Classics siphon water from a reservoir into the plant containers. They give the plants water slowly through a porous ceramic cone so you won’t worry about squeezing the important air pockets out of the potting mix, under, or over-watering. Just place each cone in the potting soil, and connect to the provided main line attached to the reservoir. You can also add more Classics to the main 8mm line or add another kit and second bulkhead fitting to the same bucket to extend the number of plants. This specific kit can water up to 10 days minimum, 20 days max. Click here to read/download instructions.
Revolutionize your irrigation system with our combined Blumat Preset Tropf (9 inch) sensor & Drip Ring (10 inch) - the professional choice for efficient, assembly-free watering. This innovative dripper seamlessly integrates with the pre-calibrated Blumat along with eliminating the need for setting up and maintaining the Blumat.
Key Features
Blumat Compatibility: Our Drip Ring has a 3mm inlet barb that connects easily with Blumat sensors.
No Assembly Required: Our plug and play design saves you valuable time and reduces labor. With this ready-to-use solution, you can enjoy the benefits of efficient irrigation without the complexities of component assembly.
Nutrient Compatibility: Our Drip Ring has a built-in filter and clog resistant emitters which allows you to easily feed a variety of nutrients through the ring without fear of clogging.
Durable Construction: The drip ring is made from the best quality virgin resin ensuring a highly durable product with a long lifespan.
Even Distribution: With 4 strategically placed drip points, this ring delivers water precisely where your plants need it most.
Invest in your plants' health and growth with the Blumat Drip Ring - the ultimate blend of convenience and professionalism for your gardening needs.
Description
Automatic, gravity, irrigation for up to 16 sq. ft. of raised beds. No timers, batteries, or electricity required! The pre-set Blumat sensor automatically waters and monitors the moisture levels. The BluSoak tape assures an even water distribution that promotes exponential growth and impressive yields.
Components
This Kit includes:
1 Preset Blumat 9" (IG19080)
8 BluSoak to 8mm Barbed Adapter (AG15807)
4 Blumat 8mm Elbows (IG15595)
4 Blumat 8mm Tees (IG15596)
4ft Super-Flex 8mm Tubing (IG15634)
1 Blumat 8mm x 3mm Tee (IG15653)
3ft Drip 3mm Tubing (IG16021)
16ft BluSoak Drip Tape (IG18206)
4 BluSoak Stakes (IG16320)
A time, cost, and water-saving solution to automate growing seedlings, starts, and clones; this kit could become a good friend. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don't dry out or drown. Put the pre-set Blumat sensor in one of the pots and it will automatically turn the water and off.
Components
This Kit Includes
1 Preset Blumat Capillary Mat- 4x4 (IG19154)
1 Blumat Supply Kit Small (IG19155)
1 8mm BULKHEAD / Through-Hull Tank Connector - 2 Pack (IG16900)
1 Nursery Bags 1 Gallon 50-Pack, Non-Woven Fabric (IG19235)
Description
Get the water from your source to your plants with this high quality, super flexible, almost kink-proof silicone tubing kit.
Components
This Kit includes:
25ft 8mm Super-Flex Tubing - Red (IG15634)
2 Blumat 8mm Tees (IG15596)
3 Blumat Shutoffs (IG15697)
Description
5 Gallon Reservoir with water level indicator
The main trouble people have with gravity Blumat systems comes from forgetting to refill the reservoir and letting the carrots dry out. With this simple water level indicator installed, you can see with a quick glance how soon you'll need to refill. If you already have a 5-gallon bucket system, you can just add on the water level kit.
