Fittings and Reducers

DescriptionSchedule 80 1/2" close nipple.

Read more less

Description Foot valves go into a reservoir or water tank and keep the input line full of water. They let the water come in but not out. This prevents the need to prime the pump or for the pump to work hard self-priming. Blumats don't like air in the lines and this prevents that. Without it, the water goes back into the reservoir each time the pump turns off and air goes in. If you install the bulkhead fitting on the side of the reservoir though and the pump lower than the water level, you won't need this. 3/4" female pipe thread.

Read more less

Description Transfer Barbs 1/4"

Read more less

Description Use a 1/4" quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.

Read more less

Description coming soon.

Read more less

Description Connect your BluSoak directly to a 1/2" Male Pipe Thread. Comes with a Valve that allows you to stop water flow. These also work great for putting at the end of your BluSoak line as a flush line, simply open the valve to purge water/air out. Use our 3/4" FHT to 1/2" MPT fittings (IG15620) and connect it directly to your hose. Make sure you reduce the pressure if not using a Flow Controller, pressure needs to be below 10psi if your trying to use our Soaker Hose, ideal is 3psi. Link to Soaker Hose Benefits Video

Read more less

Description Connect your Blu Carrot Soaker Hose to 3/4" hose thread.

Read more less

Description *This product is part of our "save a trip" the the hardware store, where you may be able to find this cheaper locally, but we added it to the website out of convenience. Use a 1/2" x 3/4" Male Pipe Threads Adapter to be able to convert your line from going to a 1/2" line to a 3/4" inch line, just needs to add female pipe threads to each side.

Read more less

Description An easy way to connect and disconnect Blumat sensor carrots from a drip system or main line. Just an easy half-turn on and off. We have these in almost any configuration: from 3mm to 3mm, from 3mm to 1/8," from 3mm to 1/4," from 3mm to 8mm. These come as a reducer or from the same size to the same size. We also have these with auto stops so that when you disconnect them, the water flow automatically stops. This is very handy when you want to bring a system inside for the winter, change to a different location, if you harvest a plant(s) and want to stop the water flow, or if you want to change from a low flow to a high flow set up as a plant gets larger.

Read more less

Description This is a Brass version of the regular plastic Bulkhead Fitting 3/4" male hose x 1/2" FPT we normally recommend, but some people may prefer metal over plastic.

Read more less

A float valve that stays out of your way and doesn't so easily break or get stuck like the common ones. Instead of the arms like used in toilets, this has a float that goes up and down in a protected cylinder. When the water rises, it automatically turns off the input line. When the water gets used and the float goes down, it turns the water back on.  Use with a gravity rainwater system to fill a reservoir during long times without rain, in gravity backyard systems, in tent grows, and any time you need to fill a reservoir without worrying when to turn the incoming water off — this will do that for you!

Read more less

Description3/4" MPT x 1/2" FPT Bushing. Schedule 40 PVC.

Read more less