Drippers and Stakes
Blumat Drip Ring 5" - 10 pack
Description Pack of 10 Drip Rings 5" Revolutionize your irrigation system with our Blumat Drip Ring - the professional choice for efficient, assembly-free watering. This innovative dripper seamlessly integrates with Blumat sensors, eliminating the need for extra adapters or connectors. Key Features Blumat Sensor Compatibility: Our Drip Ring has a 3mm inlet barb that connects easily with Blumat sensors. No Assembly Required: Our plug and play design saves you valuable time and reduces labor. With this ready-to-use solution, you can enjoy the benefits of efficient irrigation without the complexities of component assembly. Nutrient Compatibility: Our Drip Ring has a built-in filter and clog resistant emitters which allow you to easily feed a variety of nutrients through the ring without fear of clogging. Durable Construction: The drip ring is made from the best quality virgin resin ensuring a highly durable product with a long lifespan. Even Distribution: With 4 strategically placed drip points, this ring delivers water precisely where your plants need it most. Invest in your plants' health and growth with the Blumat Drip Ring - the ultimate blend of convenience and professionalism for your gardening needs.
$30.44
Blumat Distibution Drippers (Ten) + 2m of Drip tube - 2 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. Two barbs let you connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$40.11
BluSoak Stakes Long - Mega - Individual
Description BluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape. They also do not rust because they are made of high quality plastic rather then metal. Approximately, 7" tall, and 1" wide.
$0.48
BluSoak Stakes, mega long 7" - 50 Pack
Description 50 count package BluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape. They also do not rust because they are made of high quality plastic rather than metal. Approximately, 7" tall, and 1" wide.
$24.15
Blumat Distribution Drippers - 50 Units & 10 caps
Description Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. So with this set you can set up 10 mini systems like that. The caps go on the ends of the last distribution dripper to stop the water flow. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each put after that.
$79.00
Blumat Distributor Drippers (Ten) + 2m of Drip Tube - 4 Pack
Description These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This comes with 4 packs. Each pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
$71.72
BluSoak Stakes Long - Mega - Hold-Down Clamp (7") - 100 Pack
Description BluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape. This comes in a pack of 100. They also do not rust because they are made of high quality plastic rather then metal. Approximately, 7" tall, and 1" wide.
$48.30
Support Stake for 1/4" tubing - 100 Pack
Description These are great for holding up 1/4" tubing, allowing for greater organization and stability. Also works with 8mm tubing, but stretches the grabber slightly. Length: 8 cm
$21.00
BluSoak Tape Fitting w/ 9" Maxi Sensor Carrot Set
Description Set for connecting a Blumat sensor to BluSoak 2.0 Drip Tape. Easy convenient way to setup a BluSoak system, all you need is the amount of BluSoak soaker hose you need, and either another BluSoak to Sensor set or a BluSoak end plug fitting. Components The Set includes: 1 9" Maxi Long Blumat Sensor (IG14618) 1 Distribution Dripper (IG15557) 1 Distribution Dripper Stake (IG15591) 1 BluSoak to Sensor Fitting (IG16085)
$16.34
Blumat Flush System
Description Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding thick nutrients or teas, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake. Components This Kit Includes: 1 4-Way Adapter with On-Off Valve (IG15943) 1 Male Quick-Connect 3mm Fitting (IG16407) 1 Male Quick-Connect 8mm Fitting (IG16408) 1 Female Quick-Connect 8mm Fitting (IG16031) 1 Foot of 1/4" Super-Flex Tubing (IG16046) 1 Foot of 8mm Super-Flex Tubing (IG15634) 1 Blumat Tee (IG15653) 1 Dripper Stake (1/4") (IG16313)
$19.00
14mm Layflat Hole Punch Tool (Orange Handle)
Description This punch tool is perfect for punching holes in a Lay flat hose for drip irrigation or blumat irrigation. It will punch 14mm holes in the hose.
$153.47
Blumat Nutrient and Flush Line w/ Quick-Connect Stop
Description This is similar to our other flush line, but comes with a quick-connect stop for easy application within your system. This is an add-on to our flush systems that allows for a second medium for flushing and the addition of nutrients. This comes with configurations for 8mm supply lines, which allows for more efficient flush systems. For commercial systems (with 50 or more plants), add this line to our flush system. Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Easily: Flush your plants Add thick nutrients and teas without clogging your Blumat sensors Clean out algal and bacterial slime, as well as sediment, from your supply lines Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding tick nutrient or tea, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake.
$8.22
