Please see the Blumat Information page for detailed information on Blumats. In a nutshell, The Tropf (tropf is Austrian for drip) Blumat has become the ideal watering method for growing in greenhouses, for indoor gardening, on decks and in planter boxes, as well as for certain kinds of outdoor plants. It's the evolution of drip irrigation.
Description Use a 1/4" quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier.
$4.35
Description1/4" female insert fitting x 1/8" barbs. Usually used for multi pot drip emitter systems in commercial applications.
$0.37
Description The NEW EasySoak System The newest addition to the Blumat Systems and Sustainable Village catalogue, similar to BluSoak but without the carrot. EasySoak features the highest quality Soaker Hose (drip tape), along with a flow restrictor and fittings to connect directly to your garden hose or hose bib (spigot). Simply tap into your water source, lay out the soaker hose, and your ready to irrigate! The EasySoak system is left on all day and night, no need to add timers! The flow restrictor limits the flow of water entering the drip tape, so you are only getting a pint of water, for every foot of drip tape, per 24 hours. Bury the BluSoak drip tape to extend its lifetime, we have had farms using the same BluSoak drip tape for 25+ years! Components This kit includes: 100' of Original BluSoak Drip Tape (IG16073) 1 Blue Flow Restrictor (For 25' to 100' of Soaker Hose) (IG16330) 6" of 8mm Black Tubing (IG16329) 1 GHT Female Adapter to 8mm Barbed Fitting (IG16721) 3 BluSoak Coupler (In Case of Repair) (IG16092) 1 3/4" MHT x 1/2" FPT & 3/4" MPT (Adapter) (IG15620) 1 BluSoak to 8mm Adapter (AG15807) 1 BluSoak End Plug (IG16065) 30 Hold Down Stakes (IG16314) *Note: BluSoak works best on flat surfaces. If your landscape has more than a 1% slope, then the moisture won't spread evenly. As a solution you may need to use individual sections of BluSoak or have us recommend an alternative system.
$125.48
Description The NEW EasySoak System The newest addition to the Blumat Systems and Sustainable Village catalogue, similar to BluSoak but without the carrot. EasySoak features the highest quality Soaker Hose (drip tape), along with a flow restrictor and fittings to connect directly to your garden hose or hose bib (spigot). Simply tap into your water source, lay out the soaker hose, and your ready to irrigate! The EasySoak system is left on all day and night, no need to add timers! The flow restrictor limits the flow of water entering the drip tape, so you are only getting a pint of water, for every foot of drip tape, per 24 hours. Bury the BluSoak drip tape to extend its lifetime, we have had farms using the same BluSoak drip tape for 25+ years! Components This Kit Includes: 50' of Original BluSoak Drip Tape (IG16073) 1 Green Flow Restrictor (for 25' to 100' of Soaker Hose) (IG16329) 6" of 8mm Black Tubing (IG15611) 1 GHT Female Adapter to 8mm Barbed Fitting (IG16721) 2 BluSoak coupler (In Case of Repair) (IG16749) 1 3/4" MHT x 1/2" FPT & 3/4" MPT (Adapter) (IG15620) 1 BluSoak to 8mm Adapter (AG15807) 1 BluSoak End Plug (IG16065) 15 Hold Down Stakes (IG16789)
$70.88
Description This is a convenient fitting for any EasySoak or Soaker Hose System. Normally comes with a Flow Restrictor Ring but in case you already have one, or would like to purchase multiple type of flow controller rings, then this is product for you! Once you have this, all you need for an easy soak system is the appropriate Flow Controller, however many feet of BluSoak 2.0 Drip Tape, and a BluSoak plug. That's it! Includes the Following Parts Assembled Together: 1 3/4" Female Hose Thread fitting x 8mm barb 6" of 8mm Black tubing 8mm barb x BluSoak adapter
$7.35
Description8mm Cross that works best our Super-Flex silicon tubing.
$2.91
Description Conventional Pipe Adapter for a 3/4" Pipe Thread to 8mm Barbed Insert, easiest way to connect your 8mm tubing to a 3/4" pipe thread. This product save's you a hardware trip, added to our website for your inconvenience. COLOR Black HOSE BARB 8mm THREAD 3/4" NPT MATERIAL Black Nylon (BN)
$1.31
Description This kit provides an easy, fast, and water-saving way to water a 5 gallon fabric pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. On top of this, there are 5 additional distribution drippers in order to drip onto five different areas of the 5 Gal pot. Water source needs to be above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) *Customer assembly is required.How it works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When your soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops water flow. Essentially, water will seep through your BluSoak hose only when your plants need it, thanks to Blumat technology. For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG14607) 4 Distribution Drippers (In-Line) (IG15557) 1 Distribution Dripper End-Piece (IG15558) 2 ft. 3mm Drip Tubing (IG16021V) 5 Universal Hold-Up Stakes (IG15924)
$20.00
Description This kit provides an easy, fast, and water-saving way to water a 5 gallon fabric pot. No timers, batteries, or electricity required! This system utilizes a Blumat carrot (sensor) to automatically water and monitor the moisture levels in your garden soil. On top of this, there are 3 additional distribution drippers in order to drip onto three different areas of the 5 Gal pot. Water source needs to be above the garden for a gravity system. For a pressure system running off a faucet or garden hose, simply add a Blumat Pressure Reducer. What You Might Need (Not included in kit): Connection to your water source (either thru-hull bulkhead fitting for gravity systems, a pressure reducer, or a Blumat pump for larger systems) 8mm Supply tube to connect your water source to your Blumats Additional Hold-Down stakes or 3mm tubing Fittings (tee's, elbows, couplers, etc.) How it Works The Tropf Blumat self-watering system functions automatically. As the soil dries, a vacuum and hydro-static pressure, coupled with a spring-loaded gating mechanism, pulls water from the main line. When your soil is sufficiently moist, pressures equalize, and the Tropf Blumat automatically stops water flow. Essentially, water will seep through your BluSoak hose only when your plants need it, thanks to Blumat technology. For a gravity-fed system, you'll need a reservoir. See 5-gallon Reservoirs below, sold with or without thru-hulls installed. Let us know if we can help you select the right products for your custom irrigation system! Need a reservoir? Link to product page here. *Note: If ordering more than a quantity of two, we will pack together a sample kit with the contents of the kit, but the rest will come in bulk packaging (we do this in order to ship items out in time, rather than to delay shipments). You may special request for all items to be packaged independently, but extra costs may apply. Components This Kit Includes: 1 Blumat Standard Carrot (5") (IG17188) 2 Distribution Drippers (in-line) (IG15565) 1 Distribution Dripper End-Piece (IG15558) 1 foot of 3mm drip tube (IG15473V) 3 Universal Hold-Up Stakes (IG16789) *Customer assembly is required.
$16.00
Description This a pressure reducer used for if you need a higher pressure due to having a longer distance going from your hose bib to your plants, or if your water supply is going up so you need a little extra pressure to bring it up vertically. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include a pressure reducer but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. For BluSoak Systems, use a our 0.5bar Pressure Reducer (7psi) as our BluSoak doesn't like pressure over 10psi and can even split. Or use one of these and a flow restrictor alternatively.
$54.88
Description New! This product allows the user to connect up to 6 Blumat Sensors with 1 connector. Perfect for growers who have multiple carrots in one pot or bed. If you have a large pot or bed with multiple sensors, organize them all together, and quickly be able to connect or disconnect them from the water source. Do you move your plants from one room to another? If so, this product will make it easier than ever to be able to quickly disconnect the plant from the water source, bring it over to the other room, and then quickly connect it back to the water source. This Product Comes With: One 6-Port Connecting Fitting Six 1/4" to 3mm Reducers About One Foot of 1/4" Super Flex One 1/2" MPT to 8mm Barbed Fitting\ Six 1/4" Plugs One 8mm Quick Connect On/Off Valve Note* This product comes unassembled. The six 1/4" plugs may be pretty hard to remove the first time so we recommend using a pair of Plyers to remove them. Does not come with extra 3mm or 8mm tubing. Retail pricing only, no wholesale or professional discounts until we can increase the volume on these.
$19.00
DescriptionThis is a 15 Psi Blumat Pressure Reducer that has all of the fittings and adapters to allow you to fit this into 1/4" supply tube with 8mm on the output.Great for being able to get optimal pressure for your Blumat System, but can now be implemented into your existing 1/4" drip system so that you can get the optimal pressure from your own supply line, then lead into the 8mm tubing from that main line.
$53.00
