Backyard Gardens

Description coming soon.

Read more less

Description coming soon.

Read more less

Description Repair a SHURflo Solar Sub Pump with this Motor Replacement Kit. Includes instructions and parts.

Read more less

Description The 902-200 controller comes in an outdoor enclosure with water level sensors and sensor wire. It can be operated from a 12V or 24V array. The 902-100 control must be mounted in a dry location and used with a 24V array. 1 year warranty. The built-in "Linear Current Boosting" circuits optimize yoiur solar water pumping system by translating the current and voltage from your DC power source into a combination that is better matched to that needed by the pump. In addition to increasing your pumping system's efficiency, the 902-200 DC Pump Controller provides your pump with protection from excessive or insufficient voltage. The controller also has the ability to automate your pumping system, ensuring that the pump does not run when the well water is too low (level sensing probes are included) or the reservoir is full (float switch must be purchased separately). The optimization, protection, and automation this controller provides make it an important component in a well designed solar water pumping system.

Read more less

Description Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. For use with 12V fan

Read more less

DescriptionWant to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.This kit uses the Dosatron D8RE2. This is fertilizer injector has a variable uptake range from 0.2%-2%. While more expensive than a standard model it allows for versatility and adaptability in your nutrient program.

Read more less

Description Want to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.

Read more less

Description Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. The 12 VOLT FAN is meant to accelerate airflow in all non-electric units. It comes pre-installed in an 11" piece of 4" diameter vent pipe so that it will fit inline in your vent stack. It also protects against downdraft and increases the evaporative performance of your non-electric unit by about 10 to 15% (still not enough to evaporate all liquids on an NE). The 2 watt, 12V fan option increases capacity and evaporation for heavy or residential use. Fan option uses 2.4 watts. Its purchase is optional with an Excel NE, a Centrex 2000 NE, or a Centrex 1000 NE.

Read more less

Introducing our Hobby Grow Living Soil Raised Bed—the perfect solution for small-scale gardening enthusiasts! Designed specifically for hobby customers, this raised bed is the only size we currently offer as a complete package, including all necessary PVC components. Product Details Dimensions: 19” x 19” x 18” Download the Assembly Instructions Watch the Assembly Video Key Features The Hobby size Living soil raised bed is made so you can fit two units' side by side in one two-by-four grow tent and have extra room on each side. Soil Capacity: When filled to the top, this bed holds 28.13 gallons (or 3.7 cubic ft). New Pipe Caps Included: These caps are used when you don't have a trellis system installed. These caps are included to prevent bugs, pests, or soil from entering the internal frame of the raised bed. (Note: Not used for the ends of the legs; they will not fit.) Innovative Liner: Includes our revolutionary living soil liner Emulate Nature with MoistureLock™ Technology, designed to replicate natural soil drainage and help maintain positive soil moisture levels. This new size allows for the highest soil capacity possible for a two-by-four tent without sacrificing environmental airflow or humidity issues.

Read more less

DescriptionBlusoak tape and fittings to water a 4'x8' area. To connect to a 5 gallon reservoir with a Float valve (IG18380). For small systems, this is a simple way of controlling your pressure without needing a pressure regulator - just raise the reservoir higher for more water, lower for less. The output fittings include an adapter to the included 8mm line these kits use. Each includes the fittings and supply line to go from the bucket to the bed plus an auto-irrigation system.

Read more less