Products

OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

Read more less

OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

Read more less

Description OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER's unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

Read more less

DescriptionIrrometer Standard (SR) Model, 48"

Read more less

OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge. They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working. Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil. Click here for Irrometer's instruction manual.

Read more less

1 oz. bottle of concentrated dye for coloring water. To prepare IRROMETER Field Solution: Add a capful of this concentrate to 1 gallon of distilled water in a clean container. Fill IRROMETER with Field Solution as recommended (See Reference Book) Harmless to roots and skin

Read more less

1 oz. bottle of concentrated dye for coloring water. To prepare IRROMETER Field Solution: Add a capful of this concentrate to 1 gallon of distilled water in a clean container. Fill IRROMETER with Field Solution as recommended (See Reference Book) Harmless to roots and skin

Read more less

This assortment kit is with 1 Soil Temperature Sensor, 7 WATERMARK Sensors. The WATERMARK Monitor is a Data Logger; a device that automatically records soil moisture readings. This reading history provides a vivid picture of the soil moisture profile your irrigation practices have created. The data can be evaluated to determine ways to improve irrigation scheduling for optimum results. Individual sensor readings display on the monitor and can be taken manually at any time. The in-field display allows you to make on-the-spot checks for scheduling purposes while periodic readings are automatically taken to record the performance history. Click here for Irrometer's instruction manual.

Read more less

Standard WATERMARK Soil Moisture Sensor. For use with all crops. To be used with WATERMARK Meter, Monitor, Voltage Adapter or a compatible device. Reads electrical resistance in 0-200 centibar (cb) and kilopascal (kPa) range. Comes standard with half inch stripped and tinned ends. 15' (4.5 m) length This sensor consists of a pair of highly corrosion resistant electrodes that are embedded within a granular matrix. A current is applied to the WATERMARK to obtain a resistance value. The WATERMARK Meter or Monitor correlates the resistance to centibars (cb) or kilopascals (kPa) of soil water tension. The WATERMARK is designed to be a permanent sensor, placed in the soil to be monitored and "read" as often as necessary with a portable or stationary device. Internally installed gypsum provides some buffering for the effect of salinity levels normally found in irrigated agricultural crops and landscapes. Click here for Irrometer's instruction manual.

Read more less

The mid-size hanger for shipping containers.

Read more less

Top choice for maximum efficiency and performance.

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco B110 Water-Reel Bellows Driven Water-Reel® with 1.1” ID x 280’ MDPE Tube Simple, reliable, portable irrigation for pastures, paddocks, riding arenas, sports fields, vegetables and residential settings Automatic shutoff allows for unattended operation Mechanical levelwind system with miswrap safety for uniform, reliable tube rewinding Click here to download the spec sheet. Standard Features and Benefits The Kifco Model B110 uses a water powered bellows drive which operates as low as 45 psi and 4 gpm with no additional pressure requirements making it more reliable than small turbines Retraction speed control dial provides easy adjustment and setting of application rate Sprinkler selector valve easily allows for automatic sprinkler shutoff at the end of the run or continued operation Two large flotation tires make transport by hand or small garden tractor simple Technial Specifications Tube Inner Diameter/Length: 1.1" x 280' Irrigated Width: 68' - 118' Irrigated Length: 314' - 339' Irrigated Area Per Run (Acres): 0.5 - 0.8 Drive System: Bellows GPM Range: 4 - 27 Inlet PSI Range: 45 - 103 Hours Per Full Run: 2.3 - 14 Retraction Speed: 20' - 120' Per Hour Dry Weight (lbs): 276 Weight With Water (lbs): 345 Inlet Diameter: 1.5" Male Camlock Supply Hose: 15' 1.5" Male x Female Camlock Options Booster Pump: 1 Hp Electric Booster Pump (cannot be Reel mounted) Primary Pump: 5.5Hp, Gas, 9Hp Gas

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco B140 Water-Reel Bellows Driven Water-Reel® with 1.4” ID x 350’ MDPE Tube Simple, reliable, portable irrigation for sports fields, residential settings, hobby farms and food plots Automatic shutoff allows for unattended operation Mechanical levelwind system with miswrap safety for uniform, reliable tube rewinding Click here to download the spec sheet. Standard Features and Benefits The Kifco Model B140 uses a water powered bellows drive which operates as low as 47 psi and 18 gpm with no additional pressure requirements making it more reliable than small turbines Retraction speed control dial provides easy adjustment and setting of application rate Sprinkler selector valve easily allows for automatic sprinkler shutoff at the end of the run or continued operation Three large flotation tires make transport by hand or small garden tractor simple Technical Specifications Tube Inner Diameter/Length: 1.4" x 350' Irrigated Width: 100' - 198' Irrigated Length: 400' - 449' Irrigated Area Per Run (Acres): 0.9 - 2.0 Drive System: Bellows GPM Range: 18 - 80 Inlet PSI Range: 47 - 149 Hours Per Full Run: 3.7 - 10 Retraction Speed: 20 - 85 ft. per hour Dry Weight: 530 lbs. Weight With Water: 775 lbs. Inlet Diameter: 1.5" Male Camlock Supply Hose: 15' 1.5" Male x Female Camlock Options Booster Pumps: 5.5 Hp Gas, 9Hp Gas Primary Pump: 5.5Hp Gas, 9Hp Gas Guncart Tire Upgrade: Added stability in rough terrain

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco E110 Water-Reel DC Electric Driven Water-Reel® with 1.1” ID x 280’ MDPE Tube (Battery not included) Simple, reliable, portable irrigation for pastures, paddocks, riding arenas, sports fields, vegetables and residential settings Automatic shutoff allows for unattended operation Mechanical levelwind system with miswrap safety for uniform, reliable tube rewinding Click here to download the spec sheet. Standard Features and Benefits The Kifco Model E110 uses a DC electric retraction motor and can operate as low as 23 psi and 3 gpm for up to 40 hours on a full charge (Battery not included) • Optional solar panel is available for hassle free outdoor use Sprinkler selector valve easily allows for automatic sprinkler shutoff at the end of the run or continued operation Two large flotation tires make transport by hand or small garden tractor simple Technical Specifications Tube Inner Diameter/Length: 1.1" x 280' Irrigated Width: 58' - 110' Irrigated Length: 309' - 335' Irrigated Area Per Run (Acres): 0.4 - 0.8 Drive System: DC Electric Motor GPM Range: 3 - 26 Inlet PSI Range: 23-100 Hours Per Full Run: 1.75 - 9.3 Retraction Speed: 30' - 160' Dry Weight (lbs): 300 Weight With Water (lbs): 369 Inlet Diameter: 1.5" Male Camlock Supply Hose: 15' x 1.5" Male x Female Camlock Options Solar Panel Kit: Eliminates the need for AC charge Booster Pump: 1Hp Electric (cannot be Reel mounted) Primary Pump: 5.5Hp Gas, 9Hp Gas Battery & Trickle Charger Kit: 12 v battery and charger

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco T200L Water-Reel Turbine Driven Water-Reel® with 1.9” ID x 580’ MDPE Tube Simple, reliable, portable irrigation for sport fields, golf courses pastures, hobby farms, small agriculture ranches and construction sites Automatic shutoff allows for unattended operation Mechanical levelwind system with miswrap safety for uniform, reliable tube rewinding Click here to download the spec sheet. Standard Features and Benefits The Kifco Model T200L uses a turbine drive which operates as low as 60 psi and 28 gpm (only 10 psi or less used in the turbine) and features simple and accurate speed control making it the most efficient turbine in the market Sprinkler selector valve easily allows for automatic sprinkler shutoff at the end of the run or continued operation Three wheeled chassis for extra stability and three large flotation tires make transport by small garden tractor or utility vehicle simple Technical Specifications Tube Inner Diameter/Length: 1.9" x 580' Irrigated Width: 110' - 211' Irrigated Length: 635' - 686' Irrigated Area Per Run (Acres): 1.6 - 3.3 Drive System: Turbine GPM Range: 28 - 115 Inlet PSI Range: 60 - 149 Hours Per Full Run: 4.6 - 27 Retraction Speed: 21.5 - 126 ft. per hour Dry Weight (lbs): 1,290 Weight With Water (lbs): 2,000 Inlet Diameter: 2" Male Camlock Supply Hose: 15' 2" Male x Female Camlock Options Reel-Mounted Booster Pumps: 5.5Hp Gas, 9Hp Gas Stand-Alone Boosters: 5Hp Primary Pumps: 23Hp Gas, 21Hp Gas or 35 Hp Gas Stiff Tongue & Jack Kit: Bolt on kit for easy transport in rough terrain Guncart Wheel Upgrade: 16" wheels - added stability in rough terrain

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco T25-750 Ag-Rain Water-Reel Turbine Driven Water-Reel® with 2.5” ID x 750’ MDPE Tube Portable, Simple, Reliable irrigation for pastures, cash crops, reclamation, mining and construction sites, and large sports complexes The UV resistant MDPE Tube is extremely durable and carries a 5 year pro-rated warranty against manufacturing defects Click here to download the spec sheet. Standard Features and Benefits Extremely efficient radial turbine provides retraction speed control A two speed gearbox and three pulley settings provide six speed operation Taky (Electronic Tachometer) which measures retraction speed, length of run, tube remaining and time to end of run Liquid filled inlet pressure gauge 30' x 3" supply hose with 4" male ring lock supply end Tube mis-wrap safety shutoff Automatic shutoff of drive mechanism Chain operated level wind system Speed compensation for consistent retraction speeds for entire length of run Adjustable width guncart for added stability Hand crank operated guncart lift Heavy duty hand crank stabilizer legs Drawbar hitch for easy towing Single axle galvanized heavy duty chassis Hand operated jack Ball bearing turntable Cross-Over Pipe allowing for water inlet on both sides of the reel Technical Specifications Tube Inner Diameter/Length: 2.5" x 750' Irrigated Width: 154' - 207' Irrigated Length: 831' - 857' Retraction Speed: 30 - 300 ft. per hr. Irrigated Area Per Run (Acres): 2.9 - 4.1 Drive System: Turbine GMP Range: 74 - 177 Inlet PSI Range: 72 - 141 Hours Per Full Run: 1.9 - 18.9 Dry Weight (lbs): 2,150 Weight w/ Water (lbs): 3,100 Chassis Size: ST2 Options Primary Pumps: 23Hp Gas, 37Hp Gas or 48Hp Diesel Reel-Mounted Booster Pumps: 9Hp Gas Guncart Riser Extensions: 12" or 24" guncart riser extensions (High Cart) High Pressure Shutdown: Automatically shuts off water flow at the end of each run Rain Sentry Irrigation Computer: Generates a digital read out and controls retraction speed, application rate, shut off and start up PTO Shaft: Ability to rewind your machine with your tractor without irrigating Sprinklers: Nelson SR100

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco Water Reel Model T30/660 Turbine Driven Water-Reel® with 3.0” ID x 660’ MDPE Tube Portable, Simple, Reliable irrigation for pastures, cash crops, reclamation, mining and construction sites, and large sports complexes The UV resistant MDPE Tube is extremely durable and carries a 5 year pro-rated warranty against manufacturing defects Click here to download the spec sheet. Standard Features and Benefits Extremely efficient radial turbine provides retraction speed control A two gearbox and three pulley settings provide six speed operation Taky (Electronic Tachometer) which measures retraction speed, length of run, tube remaining and time to end of run Liquid filled inlet pressure gauge 30’ x 3” supply hose with 4” male ring lock supply end Tube mis-wrap safety shutoff Automatic shutoff of drive mechanism Chain operated level wind system Speed compensation for consistent retraction speeds for entire length of run Adjustable width guncart for added stability Hand crank operated guncart lift Heavy duty hand crank stabilizer legs Drawbar hitch for easy towing Single axle galvanized heavy duty chassis Hand operated jack Ball bearing turntable Cross-Over Pipe allowing for water inlet on both sides of the reel Technical Specifications Tube Inner Diameter/Length: 3.0" x 660' Irrigated Width: 182' - 258' Irrigated Length: 751' - 789' Retraction Speed: 30 - 300 ft. per hr. Irrigated Area Per Run (Acres): 3.1 - 4.6 Drive System: Turbine GPM Range: 125- 332 Inlet PSI Range: 72 - 150 Hours Per Full Run: 2.2 - 22 Dry Weight (lbs): 2,800 Weight w/ Water (lbs): 4,500 Chassis Size: ST3 Options Primary Pumps: 23Hp Gas, 48Hp Diesel Stand-Alone Boosters: 5Hp, 7.5Hp High Pressure Shutdown: Automatically shuts off water flow at the end of each run Rain Sentry Irrigation Computer: Generates a digital read out and controls retraction speed, application rate, shut off and start up Guncart Riser Extensions: 12" or 24" guncart riser extensions (High-Cart) PTO Shaft: Ability to rewind your machine with your tractor without irrigating Sprinklers: Nelson SR150 or Kormet 140 Ultra

Read more less

Not eligible for free shipping. Please contact us for a shipping estimate, or we will reach out to you after you place your order. About the Kifco T40-1320 Water-Reel Turbine Driven Water-Reel® with 4.0” ID x 1320’ MDPE Tube Portable, Simple, Reliable irrigation for pastures, cash crops, reclamation, mining and construction sites, and large sports complexes The UV resistant MDPE Tube is extremely durable and carries a 5 year pro-rated warranty against manufacturing defects Click here to download the spec sheet. Standard Features and Benefits Heavy duty hydraulic stabilizer legs are operated by your tractor's hydraulics Efficient radial turbine provides retraction speed control Taky (Electronic Tachometer) which measures retraction speed, length of run, tube remaining and time to end run Liquid filled inlet pressure gauge 30' x 4" supply hose with 4" male ring lock supply end Tube mis-wrap safety shutoff Automatic shutoff of drive mechanism Hand operated hydraulic jack Chain operated level wind system Speed compensation for consistent retraction speeds and application rate for the entire length of run Adjustable width guncart which allows for offset gun operation & added width for stability Hydraulic operated guncart lift Galvanized heavy duty chassis Heavy ST8 chassis is equipment with dual, adjustable width axles for added stability Adjustable height drawbar hitch for easy towing Ball bearing turntable Cross-Over Pipe allowing for water inlet on both sides of the reel Technical Specifications Tube Inner Diameter/Length: 4.0" x 1320' Irrigated Width: 226' - 298' Irrigated Length: 1,433' - 1,469' Retraction Speed: 30 - 300 ft. per hr. Irrigated Area Per Run (Acres): 5.5 - 10 Drive System: Turbine GPM Range: 230 - 501 Inlet PSI Range: 86 - 150 Hours Per Full Run: 4.4 - 44 Dry Weight (lbs): 8,765 Weight w/ Water (lbs): 18,750 Chassis Size: ST7 Options Primary Pumps: N/A Booster Pumps: N/A Hydraulic Turntable: Hands free rotation Hydraulic Jack: Eliminates need to manually raise or lower the tongue of the machine High Pressure Shut Down: Automatically shuts off water flow at the end of each run Rain Sentry Irrigation Computer: Generates a digital read out and controls retraction speed, application rate, shut off and start up Guncart Riser Extensions: 12" or 24" guncart riser extensions (High-Cart) PTO Shaft: Ability to rewind your machine with your tractor without irrigating Frame Mounted Purge Pump: Purges water from PE Tube for lighter tow load Front Skid Plate: Useful in slurry applications or sludgy terrain Over Foliage Cart: Tall cart with over foliage irrigation Dual 5-Wheel Guncart Sprinklers: Nelson SR200 or Kormet 202 Ultra

Read more less

This kit is easier to assemble and has a smaller floor footprint then our earlier pump kit models. It can easily supply water pressure to a large number of Blumat Tropfs in both commercial and home operations. When To Use A Pump Kit This kit is a great solution for larger home grows and commercial facilities looking to supply their plants from a reservoir without having to get a reservoir up high for a gravity system or attach directly to a pressurized water line. What This Kit Does Not Include Supply Tubing for your Blumat system A reservoir A drill bit to install our bulkhead into the reservoir (A step up bit is preferable) Components What This Kit Includes Then pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer (2.5—14 psi).

Read more less

DescriptionPlastic stake used to locate fixed objects in the garden, such as a Blumat carrot.

Read more less

Description Find your Blumats when your mulch or cover crops get too high. The red tops make them easy to see and we also use them at the beginnings and ends of BluSoak and EasySoak lines to prevent cutting or putting a stake into the tubing and causing leaks. Also good for seedlings or anything that's easy to get lost in the garden.

Read more less

Description Find your Blumats when your mulch or cover crops get too high. The red tops make them easy to see and we also use them at the beginnings and ends of BluSoak and EasySoak lines to prevent cutting or putting a stake into the tubing and causing leaks. Also good for seedlings or anything that's easy to get lost in the garden.

Read more less

Description Locator Stakes Find your Blumats when your mulch or cover crops get too high. The red tops make them easy to see and we also use them at the beginnings and ends of BluSoak and EasySoak lines to prevent cutting or putting a stake into the tubing and causing leaks. Also good for seedlings or anything that's easy to get lost in the garden.

Read more less