This deluxe version of our Gravity Irrigation Kit ads 6 more XL Classics, a 12" rain screen for the top, an interior filter, and adapters for a total of 12 as well as a water level indicator that shows how much water is in your reservoir. You can fill these with rainwater, the water that would normally go down the drain while you're waiting for it to get hot, from a pond, from a garden hose, or any good source. We designed this for a kind of simplicity that can make it extremely easy for people without much time, money, or mechanical skills. It's simple, complete, easy to set up, and inexpensive; but also, creates an easy way almost anyone can help keep more moisture in the ground, lower ambient air temperatures, prevent erosion, and keep the soil and plants more healthy. This represents only a small step in solving these environmental problems but it has solid benefits as well as providing a base learning curve for setting up larger systems in the future.
Description
PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)! NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement! AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity! BLUSOAK/EASYSOAK COMPATIBLE - This is an ideal timer for BluSoak and EasySoak Drip Tape systems! WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries! Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems. Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s). Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes. This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer. This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output. This will work ideally with BluSoak and EasySoak Drip Tape watering systems.
Description
PERFECT FOR RAIN BARREL(S) - Ideal for automating gravity-fed irrigation and drip irrigation kit(s)!
NO PRESSURE REQUIRED - Unlike competitors, this timer has no minimum pressure requirement!
AUTOMATIC GRAVITY WATERING - Unlike rainbird, rachio 3, and orbit timers, this will work w/ gravity!
BLUSOAK/EASYSOAK COMPATIBLE - Fittings for 3/4", 1/2", and 8mm included!
WIRELESS, WIFI-FREE, BATTERY POWERED - No wifi, no wires, no excessive EMF, just batteries!
Forget wasteful lawn sprinkler(s), so-called smart sprinkler controller(s), and systems with excessive drip irrigation parts. This timer is so low-fuss and user-friendly that you'll be throwing away your water sprinklers for lawns, rainbird, rachio 3, and orbit systems. This is the perfect battery-powered timer for any garden watering system, but is ideally suited for gravity-fed systems.Other irrigation timer(s) and wifi sprinkler controller(s) require a minimum pressure input to operate. These timers generally require 10-15PSi to function--but not this gravity system timer. It allows for drip system integration from rain barrel(s) or passive gravity-powered garden irrigation system(s).
Intervals can be set anywhere from 1 hour to 1 week, with on times capable of being set to 1 minute up to 120 minutes.This could also be used as garden hose timer, water hose timer, watering timer, outdoor hose timer, hose timer outdoor, hose faucet timer, but it will really shine as a drip irrigation timer and/or garden water timer.
Components
The following fittings are included:
IG15639 3/4" FHT x 1/2" FPT Swivel (IG15639)
3/4" Garden Hose Quick-Connect
IG15716 1/2" MPT x 1/2" Barbed Insert (IG16263)
IG15540 1/2" MPT x 8mm Barbed Insert (AG15807)
This timer uses 2x AA batteries, which are not provided. Dials operate the intervals and on-time, and the timer has a 3/4" Female Hose Thread (FHT) Input (perfect for garden hoses), and a 3/4" Male Hose Thread (MHT) output.This will work ideally with BluSoak and EasySoak Drip Tape watering systems.
Description
GrowStream™ Subsurface Irrigation Tape is a plant-responsive subsurface irrigation system that dynamically delivers water and nutrients based upon individual plant demand. This tube is a microporous material that retains water until flow is triggered by plant root exudates. The tubing has no emitters, but releases water along its entire surface through millions of micropores.
The tubing diameter is 0.625 in. (5/8 in.) (16 millimeters) I.D.
Responsive Pressure Range: 1.0-4.0 psi (69-276 mbar)
Recommended Operating Pressure: 1.0-3.0 psi (69-207 mbar)
Maximum Operating Pressure: 6.0 psi (414 mbar)
Flow Rate: 0-0.054 gpm (0.204 l/m) per linear foot
Minimum install depth: 3” (7.6 cm)
GrowStream™ is compatible with virtually all soil types and growing mediums. Soil must be free of debris and sharp objects like rocks and thorns. Sand can be added to the trenches below and around tubing to prevent damage.
Other Products You Might Need (not included)
Pressure Gauge 0-5 psi
For a guide on the proper use of this product, please go to https://www.irrigation.equipment/guide-to-sub-surface-irrigation-with-growstream/
Description
GrowStream™ Subsurface Irrigation Tape is a plant-responsive subsurface irrigation system that dynamically delivers water and nutrients based upon individual plant demand. This tube is a microporous material that retains water until flow is triggered by plant root exudates. The tubing has no emitters, but releases water along its entire surface through millions of micropores.
The tubing diameter is 0.625 in. (5/8 in.) (16 millimeters) I.D.
Responsive Pressure Range: 1.0-4.0 psi (69-276 mbar)
Recommended Operating Pressure: 1.0-3.0 psi (69-207 mbar)
Maximum Operating Pressure: 6.0 psi (414 mbar)
Flow Rate: 0-0.054 gpm (0.204 l/m) per linear foot
Minimum install depth: 3” (7.6 cm)
GrowStream™ is compatible with virtually all soil types and growing mediums. Soil must be free of debris and sharp objects like rocks and thorns. Sand can be added to the trenches below and around tubing to prevent damage.
Other Products You Might Need (not included)
Pressure Gauge 0-5 psi
For a guide on the proper use of this product, please go to https://www.irrigation.equipment/guide-to-sub-surface-irrigation-with-growstream/
Description
GrowStream™ Subsurface Irrigation Tape is a plant-responsive subsurface irrigation system that dynamically delivers water and nutrients based upon individual plant demand. This tube is a microporous material that retains water until flow is triggered by plant root exudates. The tubing has no emitters, but releases water along its entire surface through millions of micropores.
The tubing diameter is 0.625 in. (5/8 in.) (16 millimeters) I.D.
Responsive Pressure Range: 1.0-4.0 psi (69-276 mbar)
Recommended Operating Pressure: 1.0-3.0 psi (69-207 mbar)
Maximum Operating Pressure: 6.0 psi (414 mbar)
Flow Rate: 0-0.054 gpm (0.204 l/m) per linear foot
Minimum install depth: 3” (7.6 cm)
GrowStream™ is compatible with virtually all soil types and growing mediums. Soil must be free of debris and sharp objects like rocks and thorns. Sand can be added to the trenches below and around tubing to prevent damage.
Other Products You Might Need (not included)
Pressure Gauge 0-5 psi
For a guide on the proper use of this product, please go to https://www.irrigation.equipment/guide-to-sub-surface-irrigation-with-growstream/
Description
GrowStream™ Subsurface Irrigation Tape is a plant-responsive subsurface irrigation system that dynamically delivers water and nutrients based upon individual plant demand. This tube is a microporous material that retains water until flow is triggered by plant root exudates. The tubing has no emitters, but releases water along its entire surface through millions of micropores.
The tubing diameter is 0.625 in. (5/8 in.) (16 millimeters) I.D.
Responsive Pressure Range: 1.0-4.0 psi (69-276 mbar)
Recommended Operating Pressure: 1.0-3.0 psi (69-207 mbar)
Maximum Operating Pressure: 6.0 psi (414 mbar)
Flow Rate: 0-0.054 gpm (0.204 l/m) per linear foot
Minimum install depth: 3” (7.6 cm)
GrowStream™ is compatible with virtually all soil types and growing mediums. Soil must be free of debris and sharp objects like rocks and thorns. Sand can be added to the trenches below and around tubing to prevent damage.
Other Products You Might Need (not included)
Pressure Gauge 0-5 psi
For a guide on the proper use of this product, please go to https://www.irrigation.equipment/guide-to-sub-surface-irrigation-with-growstream/
Description
GrowStream™ Subsurface Irrigation Tape is a plant-responsive subsurface irrigation system that dynamically delivers water and nutrients based upon individual plant demand. This tube is a microporous material that retains water until flow is triggered by plant root exudates. The tubing has no emitters, but releases water along its entire surface through millions of micropores.
The tubing diameter is 0.625 in. (5/8 in.) (16 millimeters) I.D.
Responsive Pressure Range: 1.0-4.0 psi (69-276 mbar)
Recommended Operating Pressure: 1.0-3.0 psi (69-207 mbar)
Maximum Operating Pressure: 6.0 psi (414 mbar)
Flow Rate: 0-0.054 gpm (0.204 l/m) per linear foot
Minimum install depth: 3” (7.6 cm)
GrowStream™ is compatible with virtually all soil types and growing mediums. Soil must be free of debris and sharp objects like rocks and thorns. Sand can be added to the trenches below and around tubing to prevent damage.
Other Products You Might Need (not included)
Pressure Gauge 0-5 psi
For a guide on the proper use of this product, please go to https://www.irrigation.equipment/guide-to-sub-surface-irrigation-with-growstream/
Description
Don’t get tangled up in netsHarvest faster and more efficiently with this innovative new system. You can hang your plants immediately for better results while preserving flower quality. They also make tracking performance more accurate, and reduce the common damage from totes, nets, and over-handling. Instead of taking your crop to the drying hangers, you can take the hangers to your greenhouse, field, or grow room. Cut and hang your crop where it grows and you won’t have to touch your flowers again until they dry. An integrated handle lets one person carry a full stick of hangers while optimizing a consistent airflow. And when dry, you won’t believe how fast you can empty the hangers.
Components
This Kit Contains:
Adjustable Chains & Elevation-Bars (x2)
Tent-Stick Hanger Bar (x1)
The Right J-Hangers That Fit Your Kit (x5)
Components
Don’t get tangled up in netsHarvest faster and more efficiently with this innovative new system. You can hang your plants immediately for better results while preserving flower quality. They also make tracking performance more accurate, and reduce the common damage from totes, nets, and over-handling. Instead of taking your crop to the drying hangers, you can take the hangers to your greenhouse, field, or grow room. Cut and hang your crop where it grows and you won’t have to touch your flowers again until they dry. An integrated handle lets one person carry a full stick of hangers while optimizing a consistent airflow. And when dry, you won’t believe how fast you can empty the hangers.
Components
This Kit Contains:
Adjustable Chains & Elevation-Bars (x2)
Tent-Stick Hanger Bar (x1)
The right J-Hangers that fit your kit (x5)
Description
This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve a professional grow. Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 14 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s). Assembly Instructions Guide to Blumat Pump Kits High Flow Pump Kit Assembly Instructions
This kit is easier to assemble and has a smaller floor footprint then our earlier pump kit models. It can easily supply water pressure to a large number of Blumat Tropfs in both commercial and home operations.
When To Use A Pump Kit
This kit is a great solution for larger home grows and commercial facilities looking to supply their plants from a reservoir without having to get a reservoir up high for a gravity system or attach directly to a pressurized water line.
What This Kit Does Not Include
Supply Tubing for your Blumat system.
A reservoir
A drill bit to install our bulkhead into the reservoir. (A step up bit is preferable)
Components
What This Kit Includes
Then pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer (2.5—14 psi).
Description
3/4" male hose thread x 3/4" male hose thread. This filter will remove physical particulates and debris prior to entering your irrigation line. Great for drip emitters.
Description
An easy way to check pressure on long tape or tubing lines. Just use use this on end of a tape line, a water supply line, even on to a faucet. The thread is standard 3/4" hose thread. With several of these and our quick connect pressure gauge connectors (IG17692 or IG17691), you only need one meter and can still quickly check multiple lines. Contains: 3/4" Hose Thread Cap w/ Washer Schrader Valve Single
Need some automated houseplant watering support but not sure how to start? To get exactly what you want, start with this foundation kit and add on Classics based on number and size of your plants, the type of water container, and any other options you might need.For our complete version see IG18665.This starter kit includes a bulkhead fitting that will connect with the water reservoir of your choice. All that's needed is a 1/2" (12mm) borehole.
A 2 gallon water container that looks good, can water your plants for 1-3 weeks, and also prevents algae from growing. The bulkhead fitting and valve attach to 8mm supply line (IG15978, sold separately) that circulates around your plants. Any place you need watering, just cut the line with scissors, push the two ends of the tee attached to either the regular or XL Classic (order separately), and push the Classic into your potting mix. You can change the amount of water supplied by raising or lowering the jar. The handy wooden chalkboard makes it easy to record dates if you'd like to keep track of how long the water lasts.
The most economical Glass version but still looks good and thin enough to hide between or behind plants. The bulkhead fitting and valve attach to 8mm supply line (IG15978, sold separately) that circulates around your plants. Any place you need watering, just cut the line with scissors, push the two ends of the tee attached to either the regular or XL Classic (order separately), and push the Classic into your potting mix. You can change the amount of water supplied by raising or lowering the jar. (Some of the glass jars pictured here are clear but a different shape than the ones we send.)
Description
Our indoor kit features six Blumat stakes. These Blumats ensure a constant supply of water to your indoor plants. They automatically supply just the right amount -never too much or too little. Your plants won't experience any drying out that stunts growth or over-watering that squeezes the air out of the soil and keeps plants from "breathing" properly.
As the soil dries, a ceramic cone gradually delivers water into the surrounding dirt, which creates a vacuum within the cone that draws water from a nearby container of water. And once the soil reaches a desired moisture level, the Blumat will stop pulling in water. You can even add fertilizer to the water supply — slow, continual feeding encourages prolific plant growth.
Vacation without worrying about watering your plants.
Just fill up a container with enough water to last your plants while you're gone - Blumat will do the rest!
No need to re-pot, move your plants, or hire a plant sitter.
Great while you're at home, too!
Simply fill a water container, connect your Blumat, and take care of many different plants and plant types at the same time!
Easy and simple to set up
Plants grow healthier and faster
Slow and steady watering allows water to warm up before going into the soil, eliminating the worry of shocking your plants.
Blumat stakes will only draw water up 12 inches (30cm). Be sure to place your water supply within this range. If the surface of the water in your container is lower than this, the flow of water will be restricted and your plants will gradually dry out. Each Blumat holds a limit on how fast it can deliver water. Use several cones or a Blumat Classic XL for larger plants with higher water needs. In this case, also be sure to use a larger water reservoir.
With the included Extend-a-Kit, you can expand the reach of your Blumat stakes. Regarding plant health, sometimes it's best to have your water source further than the 33" that comes with the Blumat. This little kit gives you 10 extra feet of 8mm tubing plus 2 couplings, a T-splitter and a Y-splitter adapter. The couplings allow you extend your watering range and the T- and Y-splitters let you water 2 plants from a single water line.
Guide to the Blumat Classic
Components
This Kit Includes:
4 Blumat Classic Stakes (IG15693)
2 Blumat Classic XL Stakes (IG16897)
1 Blumat Extend-A-Kit (IG14610)
1 3mm Y Connect Adapter (BM15502)
