Products
Figure 8 End Closures 1/2"
DescriptionEnd closure for 1/2" pipe/tubing. Figure 8 Ending.
$0.44
Filter - Clear Bowl, 8mm for Blumat systems
Description A relatively inexpensive but still high quality and easy-to-use filter. Because of the clear base, you can quickly see if it's getting dirty and you can clean it out without having to unhook your lines. Includes adapters going to 8 mm Blumat line so to install, just cut the line and push the tubing on to the adapters! If your water isn't clean or you'd like to use thick nutrients in a reservoir, this filter will keep your Blumats safe. The screen has just the right mesh - not too big that could let clogging particles through or too small that would mean unnecessary cleaning. Clear bases make it easier to tell if they need to be cleaned but best only in dark rooms. White bases better to prevent algae build-up. For the same price, we can also ship this with fittings for 1/2" drip, 3/8" drip, 1/2" & 3/4" slip PVC. For a little extra, we can provide a fitting for 3/4 hose thread or any combination of the above. Specs Blumat Filter/Strainer Specs: Length 3 In. Height 4 3/16 In. 177 Microns 80 Mesh 316 Stainless Steel Screen Color Clear or White Screen Area 6.75 Sq.-In. Material of Construction Polypropylene 20 Max. Flow GPM Max. Pressure 100 At 70 Deg F PSI
$36.23
Filter - White Bowl, 8mm for Blumat systems
Description A relatively inexpensive but still high quality and easy-to-use filter. Includes adapters going to 8 mm Blumat line so to install, just cut the line and push the tubing on to the adapters! If your water isn't clean or you'd like to use thick nutrients in a reservoir, this filter will keep your Blumats safe. The screen has just the right mesh - not too big that could let clogging particles through or too small that would mean unnecessary cleaning. Clear bases make it easier to tell if they need to be cleaned but best only in dark rooms. White bases better to prevent algae build-up. For the same price, we can also ship this with fittings for 1/2" drip, 3/8" drip, 1/2" & 3/4" slip PVC. For a little extra, we can provide a fitting for 3/4 hose thread or any combination of the above.
$34.13
Filter Replacement Base, Clear
Description Filter Replacement Base, Clear
$13.65
Filter Replacement Base, White
Description Filter Replacement Base, White
$13.65
Flow Controller 8mm to 8mm, Up to 1500'-2500' of BluSoak, Gold
Description This is an assembled flow restrictor unit that can fit into an 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.5GPM per min, and should be used when using lengths of BluSoak between 1500 to 2500 feet.
$16.87
Flow Controller 8mm to 8mm, Up to 200'-750' of BluSoak, Silver
Description This is an assembled flow restrictor unit that can fit into a a 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.15GPM per min, and should be used when using lengths of BluSoak between 200 to 750 feet.
$16.87
Flow Controller 8mm to 8mm, Up to 750'-1500' of BluSoak, Black
Description This is an assembled flow restrictor unit that can fit into an 8mm supply line. Flow controllers work similar to a pressure reducer, but instead limit the certain flow rate that can be entered into a system. We use Flow controllers in our BluSoak systems in order to limit the total amount of water that can enter the system, this acts as a safety mechanism to make sure you do not flood your system too rapidly in case of any errors. This particular product limits the flow of our mega drip tape to 0.35 GPM per min, and should be used when using lengths of BluSoak between 750 to 1500 feet.
$16.87
Flow Controller Circle Ring - Black (up to 750' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Black' flow restrictors (IG16374) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Black' version limits flow for our mega drip tape to 9.0 gallons/hour and should be installed when using lengths of BluSoak between 200 to 750 feet.
$5.25
Flow Controller Circle Ring - Blue (up to 100' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Blue' flow restrictors (IG16330) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions.This 'Blue' version limits flow for our mega drip tape to 1 gallon/hour and should be installed when using lengths of BluSoak between 50 and 100 feet.
$5.25
Flow Controller Circle Ring - Gold (For up to 2500' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Gold' flow restrictors (IG16376) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Gold' version limits flow for our mega drip tape to 30 gallons/hour and should be installed when using lengths of BluSoak between 1500 to 2500 feet.
$5.25
Flow Controller Circle Ring - Green (up to 50' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Green' flow restrictors (IG16329) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions.This 'Green' version limits flow for our mega drip tape to 0.50 gallons/hour and should be installed when using lengths of BluSoak between 25 and 50 feet.
$5.80
Flow Controller Circle Ring - Red (up to 200' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Red' flow restrictors (IG16331) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Red' version limits flow for our mega drip tape to 2 gallons/hour and should be installed when using lengths of BluSoak between 100 to 200 feet.
$5.25
Flow Controller Circle Ring - Silver (up to 1500' of BluSoak)
Description NOTE: This is only the inner ring of one of our flow restrictors. You may install this onto your spigot or supply line. We also sell fully-assembled 'Silver' flow restrictors (IG16375) that can be easily attached to your system. Flow restrictors function similarly to a pressure reducer. However, they regulate certain flow rates that should be implemented into your system. We install flow restrictors in our BluSoak systems in order to restrict the total amount of water that can enter the system at a given time. This acts as a safety mechanism to ensure your system doesn't flood or water too rapidly in case of malfunctions. This 'Silver' version limits flow for our mega drip tape to 21 gallons/hour and should be installed when using lengths of BluSoak between 750 to 1500 feet.
$5.25
$0.00
Flow Restrictor, 100' to 400' BluSoak, Assembled 8mm to 8mm, Red
Description Use this to restrict the flow of your system to 0.5GPH, great for BluSoak and EasySoak Systems alike. If you use 400' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 200' of soaker hose, it will give two pint's per foot, per 24 hours, etc. Flow Restrictor, 100' to 200' BluSoak, Assembled 8mm to 8mm, Red
$15.75
Flow Restrictor, 25' to 100' BluSoak, Assembled 8mm to 8mm, Green
Description Use this to restrict the flow of your system to 0.5GPH, great for BluSoak and EasySoak Systems alike. If you use 100' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 50' of soaker hose, it will give two pint's per foot, per 24 hours. etc. Flow Restrictor, 25' to 100' BluSoak, Assembled 8mm to 8mm, Green
$15.75
Flow Restrictor, 50' to 200' BluSoak, Assembled 8mm to 8mm, Blue
Description Use this to restrict the flow of your system to 1GPH, great for BluSoak and EasySoak Systems alike. If you use 200' of soaker hose, it will give a pint of water per foot, per 24 hours. If you use 100' of soaker hose, it will give two pint's per foot, per 24 hours, etc. Flow Restrictor, 50' to 100' BluSoak, Assembled 8mm to 8mm, Blue
$15.75
Flush System for Blumats
Description Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding thick nutrients or teas, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake. Components This Kit Includes: 1 4-Way Adapter with On-Off Valve (IG15943) 1 Male Quick-Connect 3mm Fitting (IG16407) 1 Male Quick-Connect 8mm Fitting (IG16408) 1 Female Quick-Connect 8mm Fitting (IG16031) 1 Foot of 1/4" Super-Flex Tubing (IG16046) 1 Foot of 8mm Super-Flex Tubing (IG15634) 1 Blumat Tee (IG15653) 1 Dripper Stake (1/4") (IG16313)
$19.00
Flush System w/ 2 Extra Drip Stakes -- for Blumat Systems
Description Our flush systems allow you to flush your plants, a necessary process for those adding nutrients into their system. Flushing removes excess nutrients and debris from from your supply line. You can also use a flush system to add thick nutrients and teas without clogging your Blumat sensors. Our flush valve has 4 settings: all closed, all open, one direction open, and the opposite direction open. Blumats won't allow water to flow until your potting soil dries up, which means the supply line gets flushed, not your soil. When adding tick nutrient or tea, simply turn the Blumat side off, letting the mix flow solely through the flush stake. When cleaning your lines, simply leave both sides open. This system includes everything except for a Blumat sensor: a valve, adapter fittings, tubing, and drip stake. Components This Kit Includes: 1 4-way Adapter Valve (3mm) (IG15943) 1 Male Luer Integral Lock Ring to 200 Series (IG15642) 1 Male Luer Integral Lock Ring to 400 Series (IG15552) 1 Female Luer Thread Style to 250 Series Barb (IG15641) 1 foot of 1/4" Super-Flex tubing (IG16046) 1 foot of 1/2" Super-Flex tubing (IG15634) 1 Blumat Tee Drip Stakes for Flush Systems (IG15941)
$22.00
Foot Valve Connecting System
Description If connecting a Blumat pump system to a reservoir through the side or bottom is inconvenient or not possible, this option makes it easy to mount the pump above the reservoir without losing the prime. The foot valve stops the water from going back down into the reservoir and air getting into the line each time the pump turns off. This includes 6' of special flex-tube, a foot valve, clamps and fittings that will connect into the filter or pump.
$47.19
Foot Valve, 3/4"
Description Foot valves go into a reservoir or water tank and keep the input line full of water. They let the water come in but not out. This prevents the need to prime the pump or for the pump to work hard self-priming. Blumats don't like air in the lines and this prevents that. Without it, the water goes back into the reservoir each time the pump turns off and air goes in. If you install the bulkhead fitting on the side of the reservoir though and the pump lower than the water level, you won't need this. 3/4" female pipe thread.
$23.98
Four Irrometer Low Tension (LT) Models, 12" and Pump Kit
Description Irrometer sensors come made for soil (outside, gardens and farms) and for planting and potting mixes (indoor, greenhouses, and outside beds). This one - best for using with potting mixes - includes four sensors and the parts needed to set it up: a hand vacuum pump, a bottle of Irrometer fluid, 25 monthly chart forms, and a reference book. After setting up the sensors, you can use the pump to remove air from them to ensure maximum sensitivity and accuracy.
$592.62
Four Irrometer Low Tension (LT) Models, 6" and Pump Kit
Description Irrometer sensors come made for soil (outside, gardens and farms) and for planting and potting mixes (indoor, greenhouses, and outside beds). This one - best for using with potting mixes - includes two sensors and the parts needed to set it up: a hand vacuum pump, a bottle of Irrometer fluid, 25 monthly chart forms, and a reference book. After setting up the sensors, you can use the pump to remove air from them to ensure maximum sensitivity and accuracy.
$703.92
