Description
Irrometer sensors come made for soil (outside, gardens and farms) and for planting and potting mixes (indoor, greenhouses, and outside beds). This one - best for using with potting mixes - includes two sensors and the parts needed to set it up: a hand vacuum pump, a bottle of Irrometer fluid, 25 monthly chart forms, and a reference book. After setting up the sensors, you can use the pump to remove air from them to ensure maximum sensitivity and accuracy.
Description
OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge.
They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working.
Due to the IRROMETER’s unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil.
Click here for Irrometer's instruction manual.
Description
Irrometer sensors come made for soil (outside, gardens and farms) and for planting and potting mixes (indoor, greenhouses, and outside beds). This one - best for using with potting mixes - includes eight sensors and the parts needed to set it up: a hand vacuum pump, a bottle of Irrometer fluid, 25 monthly chart forms, and a reference book. After setting up the sensors, you can use the pump to remove air from them to ensure maximum sensitivity and accuracy.
Description
Fast shallow-soil information when you need itLike the 12" version, this 6" sensor measures soil moisture and transmits it to an IrroCloud Monitor. Because this one is closer to the soil surface, it works best for plants with shallow roots and for large plants when they're still small. Hook up 1-6 of these for every IrroCloud Monitor you have or plan to get and automatically have all this critical information on your phone or computer. You can also install a combination of 6" and 12" sensors on the same system with the same simple software, accuracy, graphs, averages, and configurations.
Description
Irrometer sensors come made for soil (outside, gardens and farms) and for planting and potting mixes (indoor, greenhouses, and outside beds). This one - best for using with potting mixes - includes two sensors and the parts needed to set it up: a hand vacuum pump, a bottle of Irrometer fluid, 25 monthly chart forms, and a reference book. After setting up the sensors, you can use the pump to remove air from them to ensure maximum sensitivity and accuracy.
Description
OPERATING PRINCIPLE: The IRROMETER operates on the tensiometer principle, which measures soil water tension. Soil water tension is the energy (vacuum) applied to soil by the plant as it draws in water for nutrition. This force is measured in centibars (cb) or kilopascals (kPa) of tension with a high reading indicating the dry end of the scale and a low reading indicating the wet end of the scale. The IRROMETER instrument consists of a sealed, fluid filled tube that is equipped with a porous ceramic tip and a special vacuum gauge.
They are installed in the ground with the tips placed at desired root zone depths. As the soil dries (increasing tension), fluid is drawn out of the instrument. This reduces the fluid volume in the IRROMETER, thus creating a partial vacuum which is registered on the gauge. The drier the soil, the higher the gauge reading. An irrigation application or rainfall event reverses this action. As water flows back into the soil (and the IRROMETER), tension is relieved in the soil and the instrument, resulting in a lower gauge reading (lower tension). In effect, the instrument is indicating how hard the roots are working.
Due to the IRROMETER's unique principle of operation, no calibrations are necessary under normal operating conditions for different soil types. A gauge reading of 50 cb (kPa) indicates that the roots are extracting the same amount of moisture whether the crop is planted in sandy soil or clay soil.
Click here for Irrometer's instruction manual.
Description
The IRROMETER Model LT (Low Tension) was designed to operate in coarse sandy soils and non-soil growing media. With a range of 0-40 centibars (cb) or kilopascals (kPa), this instrument is for use in situations where tensions above 30 cb (kPa) are rarely expected. Gauge increments of 1 cb (kPa) provide a benefit where finer resolution near saturation is needed. This model instrument is also well suited for conditions where rapidly changing soil moisture conditions need to be observed. The "Quick-Flo" ceramic tip is colored blue for easy identification. <>Model LT IRROMETERS can be used for manual measurement and tracking of soil moisture status in coarse sandy soils and growing media. When equipped with optional electronic output and data logging equipment, measurement and tracking can be done automatically. The low tension vacuum gauge on this model can be replaced with electronic measurement options, or automatic switching devices which can activate peripheral equipment at desired soil water tension levels. See the "Automation and Output Options" specifications for more details. The Model LT is the best choice for container media such as peat, bark, sand, perlite and vermiculite. It can also be used in any soil when the moisture is being managed close to field capacity. Click here for Irrometer's instruction manual.
