Although the history of drip irrigation goes back to the Babylonians, modern drip systems represent one of the most important agricultural innovations of all time.
They can save over 60% of the water used with flood irrigation, increase yields from 20 to 40%, cut labor costs down to almost zero, decrease the expense of big pumps and high electricity bills, decrease fertilizer costs, and maintain a more constant moisture level that increases microbe and soil health.
Because they provide water more slowly, the moisture goes deeper, the roots follow giving them access to more nutrients and making the plants stronger and more healthy.
Traditional Drip Irrigation
Perma-Loc 1/2" Valve Coupling
Description1/2" Perma-Loc x 1/2" Perma-Loc coupler with on/off valve.
$3.78
Perma-Loc 1/2" Elbow
Description Connect two pieces of 1/2" tubing at a 90° angle.
$2.99
Perma-Loc 1/2" Tee
Description Connect three pieces of drip tubing in "T" shape.
$3.97
Blank Poly Tube 1/2" x 100'
Description Blank Poly Tube 1/2" x 100' Your conventional 1/2" drip tube, goes into regular 1/2" barbed fittings for drip tube.
$21.00
Perma-Loc 1/2" Swivel Adapter
Description Connect standard hose fittings to drip tubing. 3/4" FHT to 1/2" Perma-Loc fitting.
$2.43
1/2" Perma-Loc x 1/2" Perma-Loc x 8mm Tee w/ Valve
DescriptionReduces 1/2" poly tubing to 8mm (traditional Blumat supply line). Includes valve. Particularly useful when using 1/2" poly tube as supply line in large Blumat installations.
$12.43
Red 1/4" Super-Flex Tubing for Blumat Watering Systems - By the Foot
Description Super flexible and almost impossible to kinkThis tubing is more expensive than typical 1/4", but is extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, etc.It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reuseable, and we can cut this to the length you need.We also have this in 100' rolls.
$1.13
Perma-Loc 1/2" x 3/4" MHT End Cap
Description The Perma-Loc 1/2" x 3/4" MHT End Cap is a durable and reliable irrigation fitting designed to provide a secure and watertight seal. It features a 1/2" barb on one end, allowing for easy connection to a 1/2" irrigation tubing, and a 3/4" male hose thread (MHT) on the other end, providing compatibility with standard garden hoses or other fittings with a 3/4" female hose thread. The end cap is made from high-quality materials to ensure long-lasting performance and resistance to weathering and UV damage. It is an ideal choice for sealing off the end of a 1/2" irrigation line or for creating a watertight connection point.
$1.90
Red 1/4" Super-Flex Tubing - 50' Roll
DescriptionSuper flexible and almost impossible to kink This tubing is more expensive but extremely easy to use. We like to put it after a valve at the end of a loop or line and use it as a handy water source. Being so flexible, it's easy to fill a little container, give a plant a little extra water, etc. It's extruded from a specially formulated silicone with a hardness rating of 60 Shore A and heat stabilized to ensure re-use and can handle temperatures up to 500°F (260C). It's non-staining, reuseable, and we can cut this to the length you need. We also have available by the foot.*Please note that this is not the standard Blumat supply line size
$56.70
Perma-Loc 1/2" to 8mm
Description 1/2" tubing connector with 8mm barb connector. Adapts from 1/2" piping/tubing to 8mm Super-Flex.
$2.49
3/4" Hose Thread Valve
Description Add a point of on/off control to 3/4" tubing.
$3.52
1/4" Goof Plug
Description Use the larger end to plug unwanted holes in poly tubing. The small end can be used to cap off end of 1/4” drip line.
$0.08
