Description This pump is ideal for larger, production-oriented cultivation facilities. This pump kit comes with all the necessary equipment and fittings to be able to pump water from a reservoir at a 3Gal Per Minute capacity. Even better, this kit includes a 15psi Pressure Reducer so that you can use it with your Blumat system and achieve professional growth. Includes a bulkhead fitting for your reservoir, flex PVC for ease of installation, and a 4 gallon pressure tank to take some of the strain away from the pump. All the necessary fittings are included, just continue your feed line from a 1/2" barb and install a pressure reducer (also included) before your Blumats. This kit is perfect for a system with a long run from a reservoir to your room(s). This Kit Includes: 1 - Shurflo High Flow 115v AC 3GPM Pump 1 - 1/2" x 1/4" Threaded PVC Bushing 1 - Pressure Tank, 5.5 gallon (4-Gallon capacity) 1 - Blumat Standard Pressure Reducer 1bar (15psi) 1 - Blumat Filter - White Bowl, 8mm 1 - Bulkhead Fitting 3/4" male hose x 1/2" FPT 1 - 3/4" MPT x 3/4" MHT or 1/2" FPT Fitting - Adapt to Garden Hose or Pressure Reducer 1 - Teflon tape 4 - 1/2" MPT x 1/2" Insert Adapter 7 - IG16105 Hose Clamp 1/2"-1 1/4" 2 - SHURflo 1/2" NPT Elbow Hose Fitting x Wingnut 1/2" NPT 1 - 1/2" Tee (insert-FPT-insert) 1 - 6" x 1/2" Sch 80 Nipples 1 - 6' 18g Pigtail/plug 6 ft - 5/8" Braided Clear Flex Tube - Food Grade Water Supply Tube 1 - Close Nipples 1/2" x 1/2" 1 - 1/2" PVC coupling fxf thread 3 - Blue Wire Nuts Assembly Instructions Guide to Blumat Pump Kits High Flow Pump Kit Assembly Instructions

Read more less

Description With a pressure system you don't have to elevate a reservoir and can use a larger reservoir if you want to worry less about having a constant water supply. You keep the same pressure at all times and you can generally run a lot more Blumat sensors than in a gravity system. How many plants can run off this pump system depends on many factors (size of plant, soil, temperature, etc.). This kit includes the highest quality Shurflo Revolution pressure pump and accumulator tank, pressure regulator, bulkhead fitting, a T-filter/strainer, fittings and instructions.Ideal for up to about 300 square feet of canopy. This Kit Includes:   1 Shurflo Revolution 115 vac pressure pump 1 Shurflo accumulator tank 1 PVC 1/2" Female coupler with O-Ring 2 3/8" x 1/2" Coupler 1 pressure reducer 1 Clear Bowl Filter 1 1/2" x 1/2" Male Pipe x 2' braided tube 1 bulk head fitting (3/4" to 1/2") 1 1/2" x 6" plastic pipe nipple 2 1/2" x 1/2" close nipple 1 3/4" male hose x 3/4" male pipe x 1/2" Female pipe 1 Pigtail plug 1 roll of teflon tape Instructions for installation   Assembly Instructions   Guide to Blumat Pump Kits

Read more less

Introducing Our New and Improved Pump Kit  This kit is easier to assemble and has a smaller floor footprint then our earlier pump kit models. It can easily supply water pressure to a large number of Blumat Tropfs in both commercial and home operations.   When To Use A Pump Kit This kit is a great solution for larger home grows and commercial facilities looking to supply their plants from a reservoir without having to get a reservoir up high for a gravity system or attach directly to a pressurized water line.  What This Kit Includes The pump kit includes all fittings needed to get from your chosen supply tank to the supply tubing portion for your Blumat system. This kit also includes our adjustable pressure reducer.  What This Kit Does Not Include -Supply Tubing for your Blumat system. -A reservoir.  -A drill bit to install our bulkhead into the reservoir. ( A step up bit is preferable)

Read more less

DescriptionWant to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.This kit uses the Dosatron D8RE2. This is fertilizer injector has a variable uptake range from 0.2%-2%. While more expensive than a standard model it allows for versatility and adaptability in your nutrient program.

Read more less

Description Want to use Dosatron products with Blumats? No problem! Inspired by our friends out in Oregon at High Wind Farms we built this kit. Blumat systems generally operate at very low flow rates. This is an advantage over other watering systems for many reasons. However, low flow rates prevent the use of dosing systems like a Dosatron because they have minimum flow rate requirements to operate properly. By placing the Dosatron between a high flow pump and a pressure accumulator tank, the issue is solved.The pressure switch on the pump turns itself on and off as pressure levels in the accumulator tank drop. This creates bursts of high flow through the Dosatron at appropriate flow rate levels. The tank fills with nutrient mix and feeds itself through a pressure reducer into the Blumat system, maintaining constant pressure. Nutrient solution is then available to plants as they need it, 24 hours per day.

Read more less